Date: Tue, 31 Aug 1999 17:10:05 +0200 From: Andreas Klemm <andreas@klemm.gtn.com> To: scsi@FreeBSD.ORG Subject: 3.2-STABLE: SCB 0x7 - timed out in datain phase, SEQADDR == 0x10e Message-ID: <19990831171005.A2252@titan.klemm.gtn.com>
next in thread | raw e-mail | index | archive | help
What might cause this ? (da0:ahc0:0:0:0): SCB 0x7 - timed out in datain phase, SEQADDR == 0x10e (da0:ahc0:0:0:0): BDR message in message buffer (da0:ahc0:0:0:0): SCB 0x7 - timed out in datain phase, SEQADDR == 0x10d (da0:ahc0:0:0:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 10 SCBs aborted Andreas /// FreeBSD titan.klemm.gtn.com 3.2-STABLE FreeBSD 3.2-STABLE #0: Wed Aug 18 21:32:29 CEST 1999 root@titan.klemm.gtn.com:/usr/src/sys/compile/TITAN i386 Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.2-STABLE #0: Wed Aug 18 21:32:29 CEST 1999 root@titan.klemm.gtn.com:/usr/src/sys/compile/TITAN Timecounter "i8254" frequency 1193182 Hz CPU: Pentium Pro (686-class CPU) Origin = "GenuineIntel" Id = 0x619 Stepping = 9 Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV> real memory = 159383552 (155648K bytes) avail memory = 151597056 (148044K bytes) Programming 24 pins in IOAPIC #0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc02ef000. Probing for devices on PCI bus 0: chip0: <Intel 82440FX (Natoma) PCI and memory controller> rev 0x02 on pci0.0.0 chip1: <Intel 82371SB PCI to ISA bridge> rev 0x01 on pci0.7.0 vga0: <Matrox MGA 2064W graphics accelerator> rev 0x01 int a irq 255 on pci0.10.0 xl0: <3Com 3c900-COMBO Etherlink XL> rev 0x00 int a irq 19 on pci0.11.0 xl0: Ethernet address: 00:60:97:aa:3a:db xl0: selecting 10baseT transceiver, half duplex ahc0: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 17 on pci0.13.0 ahc0: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs ahc1: <Adaptec 2940 Ultra SCSI adapter> rev 0x00 int a irq 16 on pci0.14.0 ahc1: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <4 virtual consoles, flags=0x0> ed0 at 0x280-0x29f irq 10 maddr 0xd8000 msize 16384 on isa ed0: address 00:00:c0:5a:98:2a, type WD8013EPC (16 bit) atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0 sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/15 bytes threshold lpt0: <generic printer> on ppbus 0 lpt0: Interrupt-driven port fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in vga0 at 0x3c0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via pin 2 IP packet filtering initialized, divert enabled, rule-based forwarding enabled, logging limited to 100 packets/entry ccd0-3: Concatenated disk drivers DUMMYNET initialized (990504) Waiting 8 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! sa0 at ahc0 bus 0 target 4 lun 0 sa0: <TANDBERG TDC 4222 =07:> Removable Sequential Access SCSI-2 device sa0: 4.807MB/s transfers (4.807MHz, offset 8) cd1 at ahc0 bus 0 target 6 lun 0 cd1: <TEAC CD-R55S 1.0K> Removable CD-ROM SCSI-2 device cd1: 10.000MB/s transfers (10.000MHz, offset 15) cd1: cd present [215086 x 2048 byte records] cd0 at ahc0 bus 0 target 5 lun 0 cd0: <TOSHIBA CD-ROM XM-5701TA 3136> Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 8) cd0: Attempt to query device size failed: NOT READY, Medium not present da1 at ahc1 bus 0 target 1 lun 0 da1: <IBM DORS-32160 WA6A> Fixed Direct Access SCSI-2 device da1: 20.000MB/s transfers (20.000MHz, offset 15) da1: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C) da3 at ahc1 bus 0 target 3 lun 0 da3: <IBM DORS-32160 WA6A> Fixed Direct Access SCSI-2 device da3: 20.000MB/s transfers (20.000MHz, offset 15) da3: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C) da0 at ahc0 bus 0 target 0 lun 0 da0: <IBM DORS-32160 WA6A> Fixed Direct Access SCSI-2 device da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled da0: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C) da2 at ahc1 bus 0 target 2 lun 0 da2: <IBM DORS-32160 WA6A> Fixed Direct Access SCSI-2 device da2: 20.000MB/s transfers (20.000MHz, offset 15) da2: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C) ffs_mountfs: superblock updated for soft updates ffs_mountfs: superblock updated for soft updates ffs_mountfs: superblock updated for soft updates ffs_mountfs: superblock updated for soft updates ffs_mountfs: superblock updated for soft updates ffs_mountfs: superblock updated for soft updates Connection attempt to UDP 127.0.0.1:1025 from 127.0.0.1:53 xl0: promiscuous mode enabled (da0:ahc0:0:0:0): SCB 0x7 - timed out in datain phase, SEQADDR == 0x10e (da0:ahc0:0:0:0): BDR message in message buffer (da0:ahc0:0:0:0): SCB 0x7 - timed out in datain phase, SEQADDR == 0x10d (da0:ahc0:0:0:0): no longer in timeout, status = 34b ahc0: Issued Channel A Bus Reset. 10 SCBs aborted -- Andreas Klemm http://www.FreeBSD.ORG/~andreas http://www.freebsd.org/~fsmp/SMP/SMP.html powered by Symmetric MultiProcessor FreeBSD Latest song from our band: http://www.freebsd.org/~andreas/64bits/schaukel.mp3 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990831171005.A2252>