From owner-freebsd-alpha Tue Sep 5 11: 9: 0 2000 Delivered-To: freebsd-alpha@freebsd.org Received: from feral.com (feral.com [192.67.166.1]) by hub.freebsd.org (Postfix) with ESMTP id B650C37B422 for ; Tue, 5 Sep 2000 11:08:47 -0700 (PDT) Received: from zeppo.feral.com (IDENT:mjacob@zeppo [192.67.166.71]) by feral.com (8.9.3/8.9.3) with ESMTP id LAA19380; Tue, 5 Sep 2000 11:08:38 -0700 Date: Tue, 5 Sep 2000 11:05:09 -0700 (PDT) From: Matthew Jacob Reply-To: mjacob@feral.com To: Andrew Gallatin Cc: John Baldwin , Doug Rabson , alpha@FreeBSD.ORG Subject: Re: what was the last patch you sent out? In-Reply-To: Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-freebsd-alpha@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org Well, Rawhide boots. I sure wish I knew what the authors intended by saying "physical bus". I don't seems quite correct since we seem to have two different "physical bus" zeros here. On puropose I very carefully don't have overlapping cards (as in, same slot, different busses). I guess pc164 is another issue. Back to debugging. Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. Setting atkbd 0 at to atkbdc (string) Setting atkbd 0 irq to 1 (int) Setting atkbdc 0 at to isa (string) Setting atkbdc 0 port to 96 (int) Setting fd 0 at to fdc0 (string) Setting fd 0 drive to 0 (int) Setting fdc 0 at to isa (string) Setting fdc 0 drq to 2 (int) Setting fdc 0 irq to 6 (int) Setting fdc 0 port to 1008 (int) Setting mcclock 0 at to isa (string) Setting mcclock 0 port to 112 (int) Setting ppc 0 at to isa (string) Setting ppc 0 irq to 7 (int) Setting psm 0 at to atkbdc (string) Setting psm 0 irq to 12 (int) Setting sc 0 at to isa (string) Setting sio 0 at to isa (string) Setting sio 0 irq to 4 (int) Setting sio 0 port to 1016 (int) Setting sio 1 at to isa (string) Setting sio 1 flags to 80 (int) Setting sio 1 irq to 3 (int) Setting sio 1 port to 760 (int) Setting vga 0 at to isa (string) FreeBSD 5.0-CURRENT #1: Tue Sep 5 10:49:03 PDT 2000 mjacob@nellie.feral.com:/tstsys/compile/GENERIC AlphaServer 4100 AlphaServer 4100 5/533 4MB, 531MHz 8192 byte page size, 4 processors. CPU: EV56 (21164A) major=7 minor=2 extensions=0x1 OSF PAL rev: 0x4000100020117 real memory = 1608482816 (1570784K bytes) Physical memory chunk(s): 0x007f0000 - 0x5ffeffff, 1602224128 bytes (195584 pages) avail memory = 1559994368 (1523432K bytes) Preloaded elf kernel "kernel" at 0xfffffc00007d4000. Preloaded elf module "ispfw.ko" at 0xfffffc00007d40c0. mem: nulldev: random: Creating DISK md0 md0: Malloc disk mcbus0: pcib0: at mcbus0 gid 7 mid 5 pcib0: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2 pci0: physical bus=0 found-> vendor=0x1000, dev=0x0001, revid=0x02 bus=0, slot=1, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=4 map[10]: type 4, range 32, base 01fffc00, size 8, enabled map[14]: type 1, range 32, base 07fdde00, size 8, enabled found-> vendor=0x1011, dev=0x0009, revid=0x12 bus=0, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=8 map[10]: type 4, range 32, base 01fffd00, size 7, enabled map[14]: type 1, range 32, base 07fddf00, size 7, enabled found-> vendor=0x1077, dev=0x1020, revid=0x05 bus=0, slot=4, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=16 map[10]: type 4, range 32, base 01fffe00, size 8, enabled map[14]: type 1, range 32, base 07fde000, size 12, enabled found-> vendor=0x1077, dev=0x1020, revid=0x05 bus=0, slot=5, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=20 map[10]: type 4, range 32, base 01ffff00, size 8, enabled map[14]: type 1, range 32, base 07fdf000, size 12, enabled pci0: on pcib0 sym0: <810> port 0x1fffc00-0x1fffcff mem 0x7fdde00-0x7fddeff irq 4 at device 1.0 on pci0 sym0: No NVRAM, ID 7, Fast-10, SE, parity checking sym0: open drain IRQ line driver sym0: using NCR-generic firmware. sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00 sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c8/00/00/08/00 sym0: Delay (GEN=11): 268 msec, 33165 KHz sym0: Delay (GEN=11): 283 msec, 31407 KHz sym0: Delay (GEN=11): 284 msec, 31296 KHz sym0: interrupting at IRQ 0x10 intA (vec 0xb40) de0: port 0x1fffd00-0x1fffd7f mem 0x7fddf00-0x7fddf7f irq 8 at device 2.0 on pci0 de0: interrupting at IRQ 0x0 intA (vec 0xb80) de0: DEC DE500-XA 21140 [10-100Mb/s] pass 1.2 de0: address 00:00:f8:01:8b:d7 de0: enabling Full Duplex 100baseTX port bpf: de0 attached Qlogic ISP Driver, FreeBSD Version 5.3, Core Version 2.0 isp0: port 0x1fffe00-0x1fffeff mem 0x7fde000-0x7fdefff irq 16 at device 4.0 on pci0 isp0: using Memory space register mapping isp0: interrupting at IRQ 0x8 intA (vec 0xc00) isp0: Ultra Mode Capable isp0: Board Revision 1040B, loaded F/W Revision 4.65.0 isp0: Last F/W revision was 5.57.1 isp1: port 0x1ffff00-0x1ffffff mem 0x7fdf000-0x7fdffff irq 20 at device 5.0 on pci0 isp1: using Memory space register mapping isp1: interrupting at IRQ 0xc intA (vec 0xc40) isp1: Differential Mode isp1: Ultra Mode Capable isp1: Board Revision 1040B, loaded F/W Revision 4.65.0 isp1: Last F/W revision was 5.57.1 pcib1: at mcbus0 gid 7 mid 4 pcib1: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2 Attaching Real Console pci1: physical bus=0 found-> vendor=0x8086, dev=0x0482, revid=0x15 bus=0, slot=1, func=0 class=00-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 found-> vendor=0x1077, dev=0x2100, revid=0x03 bus=0, slot=3, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 subordinatebus=0 secondarybus=0 intpin=a, irq=12 map[10]: type 4, range 32, base 01ffff00, size 8, enabled map[14]: type 1, range 32, base 07fef000, size 12, enabled pci1: on pcib1 isab0: at device 1.0 on pci1 isa0: on isab0 isp2: port 0x1ffff00-0x1ffffff mem 0x7fef000-0x7feffff irq 12 at device 3.0 on pci1 isp2: using Memory space register mapping isp2: interrupting at IRQ 0x4 intA (vec 0x9c0) isp2: Board Revision 2100, loaded F/W Revision 1.19.10 isp2: Installed in 64-Bit PCI slot isp2: invalid NVRAM header Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 sc-: sc0 already exists, using sc1 instead vga-: vga0 already exists, using vga1 instead isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices atkbdc0: at port 0x60,0x64 on isa0 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 atkbd0: irq 1 on atkbdc0 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000 atkbd0: interrupting at ISA irq 1 psm0: current command byte:0061 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: RESET_AUX return code:00fe kbdc: DIAGNOSE status:0055 kbdc: TEST_KBD_PORT status:0000 psm0: failed to reset the aux device. fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: interrupting at ISA irq 6 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 mcclock0: at port 0x70-0x71 on isa0 Calibrating clock(s) ... PCC clock: 532793936 Hz (firmware 531914893 Hz) ppc0: using extended I/O port range ppc0: SPP ppc0: at port 0x3bc-0x3c3 irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: cannot reserve interrupt, failed. lpt0: on ppbus0 lpt0: Polled port ppi0: on ppbus0 ppc0: interrupting at ISA irq 7 sc0: no video adapter is found. sc0: failed to probe on isa0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: irq maps: 0 0 0 0 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A, console sio0: interrupting at ISA irq 4 sio1: reserved for low-level i/o sio1 failed to probe at port 0x2f8-0x2ff irq 3 flags 0x50 on isa0 vga0: failed to probe on isa0 sc1: no video adapter is found. sc1: failed to probe on isa0 vga1: failed to probe on isa0 isa_probe_children: probing PnP devices Timecounter "alpha" frequency 532793936 Hz bpf: gif0 attached bpf: gif1 attached bpf: gif2 attached bpf: gif3 attached bpf: lo0 attached bpf: ppp0 attached bpf: faith0 attached Waiting 15 seconds for SCSI devices to settle (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered. (probe5:sym0:0:5:0): INQUIRY. CDB: 12 1 80 0 ff 0 (probe5:sym0:0:5:0): ILLEGAL REQUEST asc:24,0 (probe5:sym0:0:5:0): Invalid field in CDB sks:c8,1 isp0: 0.1 get user period 0xc offset 0x8 flags 0xfd00 isp0: 0.1 get current period 0x19 offset 0x0 flags 0xc5c0 isp0: 0.1 set current period 0xc offset 0x8 flags 0xfd00 isp0: 0.0 get user period 0xc offset 0x8 flags 0xfd00 isp0: 0.0 get current period 0x19 offset 0x0 flags 0xc5c0 isp0: 0.0 set current period 0xc offset 0x8 flags 0xfd00 Creating DISK cd0 Creating DISK da0 Creating DISK da1 Creating DISK da2 Creating DISK da3 Creating DISK da4 Creating DISK da5 Creating DISK da6 Creating DISK da7 Creating DISK da8 Creating DISK da9 Creating DISK da10 Creating DISK da11 pass0 at sym0 bus 0 target 5 lun 0 pass0: Removable CD-ROM SCSI-2 device pass0: 10.000MB/s transfers (10.000MHz, offset 8) pass1 at sym0 bus 0 target 6 lun 0 pass1: Removable Sequential Access SCSI-2 device pass1: Serial Number 0003203169 pass1: 10.000MB/s transfers (10.000MHz, offset 8) pass2 at isp0 bus 0 target 0 lun 0 pass2: Fixed Direct Access SCSI-2 device pass2: Serial Number 6810CA31 isp0: 0.0 get current period 0xc offset 0x8 flags 0xfd00 pass2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled pass3 at isp0 bus 0 target 1 lun 0 pass3: Fixed Direct Access SCSI-2 device pass3: Serial Number 00586797 isp0: 0.1 get current period 0x19 offset 0x8 flags 0xfd00 pass3: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled pass4 at isp2 bus 0 target 130 lun 0 pass4: Fixed Direct Access SCSI-2 device pass4: Serial Number 3AL0A7XW00001952HJAD pass4: 100.000MB/s transfers, Tagged Queueing Enabled pass5 at isp2 bus 0 target 131 lun 0 pass5: Fixed Direct Access SCSI-2 device pass5: Serial Number 3AL0A7Z500001952HKAS pass5: 100.000MB/s transfers, Tagged Queueing Enabled pass6 at isp2 bus 0 target 132 lun 0 pass6: Fixed Direct Access SCSI-2 device pass6: Serial Number 3AL0A7W5000019461C4F pass6: 100.000MB/s transfers, Tagged Queueing Enabled pass7 at isp2 bus 0 target 133 lun 0 pass7: Fixed Direct Access SCSI-2 device pass7: Serial Number 3AL0A7T900001952HQSF pass7: 100.000MB/s transfers, Tagged Queueing Enabled pass8 at isp2 bus 0 target 134 lun 0 pass8: Fixed Direct Access SCSI-2 device pass8: Serial Number 3AL0A7XP00001952HJN6 pass8: 100.000MB/s transfers, Tagged Queueing Enabled pass9 at isp2 bus 0 target 135 lun 0 pass9: Fixed Direct Access SCSI-2 device pass9: Serial Number LP16582800001907192A pass9: 100.000MB/s transfers, Tagged Queueing Enabled pass10 at isp2 bus 0 target 136 lun 0 pass10: Fixed Direct Access SCSI-2 device pass10: Serial Number LP178241000019072AX4 pass10: 100.000MB/s transfers, Tagged Queueing Enabled pass11 at isp2 bus 0 target 137 lun 0 pass11: Fixed Direct Access SCSI-2 device pass11: Serial Number LP159124000019072C69 pass11: 100.000MB/s transfers, Tagged Queueing Enabled pass12 at isp2 bus 0 target 138 lun 0 pass12: Fixed Direct Access SCSI-2 device pass12: Serial Number LP061822000019071808 pass12: 100.000MB/s transfers, Tagged Queueing Enabled pass13 at isp2 bus 0 target 139 lun 0 pass13: Fixed Direct Access SCSI-2 device pass13: Serial Number LP21423900001907191R pass13: 100.000MB/s transfers, Tagged Queueing Enabled sa0 at sym0 bus 0 target 6 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: Serial Number 0003203169 sa0: 10.000MB/s transfers (10.000MHz, offset 8) da2 at isp2 bus 0 target 130 lun 0 da2: Fixed Direct Access SCSI-2 device da2: Serial Number 3AL0A7XW00001952HJAD da2: 100.000MB/s transfers, Tagged Queueing Enabled da2: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) da1 at isp0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-2 device da1: Serial Number 00586797 isp0: 0.1 get current period 0x19 offset 0x8 flags 0xfd00 da1: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled da1: 4095MB (8386733 512 byte sectors: 255H 63S/T 522C) da3 at isp2 bus 0 target 131 lun 0 da3: Fixed Direct Access SCSI-2 device da3: Serial Number 3AL0A7Z500001952HKAS da3: 100.000MB/s transfers, Tagged Queueing Enabled da3: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) da4 at isp2 bus 0 target 132 lun 0 da4: Fixed Direct Access SCSI-2 device da4: Serial Number 3AL0A7W5000019461C4F da4: 100.000MB/s transfers, Tagged Queueing Enabled da4: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) da0 at isp0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-2 device da0: Serial Number 6810CA31 isp0: 0.0 get current period 0xc offset 0x8 flags 0xfd00 da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled da0: 4303MB (8813870 512 byte sectors: 255H 63S/T 548C) da5 at isp2 bus 0 target 133 lun 0 da5: Fixed Direct Access SCSI-2 device da5: Serial Number 3AL0A7T900001952HQSF da5: 100.000MB/s transfers, Tagged Queueing Enabled da5: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) da6 at isp2 bus 0 target 134 lun 0 da6: Fixed Direct Access SCSI-2 device da6: Serial Number 3AL0A7XP00001952HJN6 da6: 100.000MB/s transfers, Tagged Queueing Enabled da6: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C) da7 at isp2 bus 0 target 135 lun 0 da7: Fixed Direct Access SCSI-2 device da7: Serial Number LP16582800001907192A da7: 100.000MB/s transfers, Tagged Queueing Enabled da7: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C) da8 at isp2 bus 0 target 136 lun 0 da8: Fixed Direct Access SCSI-2 device da8: Serial Number LP178241000019072AX4 da8: 100.000MB/s transfers, Tagged Queueing Enabled da8: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C) da9 at isp2 bus 0 target 137 lun 0 da9: Fixed Direct Access SCSI-2 device da9: Serial Number LP159124000019072C69 da9: 100.000MB/s transfers, Tagged Queueing Enabled da9: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C) da10 at isp2 bus 0 target 138 lun 0 da10: Fixed Direct Access SCSI-2 device da10: Serial Number LP061822000019071808 da10: 100.000MB/s transfers, Tagged Queueing Enabled da10: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C) da11 at isp2 bus 0 target 139 lun 0 da11: Fixed Direct Access SCSI-2 device da11: Serial Number LP21423900001907191R da11: 100.000MB/s transfers, Tagged Queueing Enabled da11: 17366MB (35566480 512 byte sectors: 255H 63S/T 2213C) (cd0:sym0:0:5:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (cd0:sym0:0:5:0): NOT READY asc:3a,0 (cd0:sym0:0:5:0): Medium not present cd0 at sym0 bus 0 target 5 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 10.000MB/s transfers (10.000MHz, offset 8) cd0: Attempt to query device size failed: NOT READY, Medium not present Mounting root from ufs:/dev/da0a da0: invalid primary partition table: no magic start_init: trying /sbin/init da1: invalid primary partition table: no magic To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message