Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 20 May 2005 09:53:01 +0400
From:      Emelianov <eav@balakovo.info>
To:        freebsd-questions@FreeBSD.org
Subject:   Radeon+nForce4 NIC for AMD64
Message-ID:  <83896279.20050520095301@balakovo.info>

next in thread | raw e-mail | index | archive | help
Dear friends!

Please help me with my new equipment:

FreeBSD-5.4-RELEASE/AMD64
mobo   Foxconn NF4UK8AA-8EKRS Socket-939 nForce4 U
RAM    2x512Mb PC3200 (Dual Channel)
VGA    PCI-Express 128Mb PowerColor R41A-PC3 (ATI Radeon X700 Pro,TV-Out,DVI)
NIC    Internal 1Gbps (nForce4)

Look the <#dmesg | grep pci> command:
----8<-------------------------------
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfebff000-0xfebfffff irq 22 at device 2.0 on pci0
pci0: <serial bus, USB> at device 2.1 (no driver attached)
pcm0: <nVidia nForce4> port 0xec00-0xecff,0xf000-0xf0ff mem 0xfebfd000-0xfebfdfff irq 20 at device 4.0 on pci0
atapci0: <nVidia nForce4 UDMA133 controller> port 0xe800-0xe80f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 6.0 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
atapci1: <GENERIC ATA controller> port 0xd400-0xd40f,0xb70-0xb73,0x970-0x977,0xbf0-0xbf3,0x9f0-0x9f7 irq 22 at device 7.0 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
atapci2: <GENERIC ATA controller> port 0xc000-0xc00f,0xb60-0xb63,0x960-0x967,0xbe0-0xbe3,0x9e0-0x9e7 irq 21 at device 8.0 on pci0
ata4: channel #0 on atapci2
ata5: channel #1 on atapci2
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <multimedia, video> at device 8.0 (no driver attached)
pci1: <multimedia> at device 8.1 (no driver attached)
fwohci0: <Lucent FW322/323> mem 0xfe9ff000-0xfe9fffff irq 19 at device 11.0 on pci1
pci0: <bridge> at device 10.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pci5: <display, VGA> at device 0.0 (no driver attached)
pci5: <display> at device 0.1 (no driver attached)
----8<-------------------------------

Wich kind of kernel options I need include to my config?
Or may be some modules need to load at boot time?

I'm already try to load the "radeon.ko" but also can't see any
positive result. (See the 'pci5' lines)

And more... What do you think about NIC on this m/board?
Wich options/modules/third party programms?

And the <#kldstat> command output for your attention:

----8<-------------------------------
Id Refs Address            Size     Name
 1   11 0xffffffff80100000 7cf120   kernel
 2    1 0xffffffff808d0000 5ef0     snd_ich.ko
 3    2 0xffffffff808d6000 2cb00    sound.ko
 4    1 0xffffffff80903000 28218    radeon.ko
 5    4 0xffffffff8092c000 8970     agp.ko
 6    1 0xffffffffa794d000 4add     tdfx.ko
 7    1 0xffffffffa7952000 1090c    r128.ko
----8<-------------------------------

Kernel is GENERIC now.

Thanks in advance.

-- 
Best Regards,
Andrei | mailto:eav@balakovo.info



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?83896279.20050520095301>