Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 29 Sep 2003 01:05:59 +0200
From:      Andreas Kohn <andreas.kohn@gmx.net>
To:        Grant Peel <grant@thenetnow.com>
Cc:        freebsd-questions@freebsd.org
Subject:   Re: Bad Super Block Count
Message-ID:  <1064790358.939.33.camel@klamath>
In-Reply-To: <00e501c38613$17612950$6501a8c0@grant>
References:  <008501c38606$6a725770$6501a8c0@grant> <00e501c38613$17612950$6501a8c0@grant>

next in thread | previous in thread | raw e-mail | index | archive | help
[redirected mail to list, remember to use reply-to-all]

On Mon, 2003-09-29 at 00:51, Grant Peel wrote:
> I am now 120 miles from the server. Since it seems that the root filesystem
> has no errors, can I simply umount the other filesystems and run fsck, (it
> will be able to write then?) and then reboot?
> 
> TIA,
> 
> 
> -Grant

You could try it at least. But then you wouldn't even need to reboot,
just remounting the drives with mount -a should bring them back.

But I'm not completely sure about this.

> Andreas Kohn wrote
> > On Sun, 2003-09-28 at 23:20, Grant Peel wrote:
> > > Hello all,
> > >
> > > One of my Dell servers has rebooted itself twice in the past week. No
> panics
> > > or anything showing in any log. No overheating noted in mbmon. I don't
> know
> > > if the diskstuff below is related.
> > >
> > > Dell called me and told me I had to do a PERC III ROM flash, so I went
> to
> > > the POP and did that. At that time I ran an fsck. I am seeing what look
> to
> > > be (I hope) none critical disk errors. I cant find anything specific in
> the
> > > FreeBSD archives and was hoping some here might have some knowledge.
> > >
> > > Here is the complete list from fsck, also I will post disklabel -r
> output at
> > > the bottom.
> > >
> > > As a side note, I could not get fsck to be interactive. Not even at the
> > > console, but I was never in single user mode either...should it matter?
> >
> > As you can see, fsck is unable to write to your partitions (which is why
> > it answers "no" to all questions). You should try to run fsck from
> > single user mode.
> >
> > >
> > > Dell 1400SC, 933Mhz, 512 MB, RAID5 PERC 3/DC.
> > >
> > > BTW, I ran a consistency check before booting back into FReeBSD and
> > > according to the PERC software the stripes etc are perfect.
> >
> > --------------------------------------------------------------------------
> --
> > > -------------
> > >
> > > enterprise# fsck
> > > ** /dev/amrd0s1a (NO WRITE)
> > ...
> > > ** /dev/amrd0s1d (NO WRITE)
> > ...
> > > ** /dev/amrd0s1h (NO WRITE)
> > ...
> >
> > -- 
> > Andreas Kohn <andreas.kohn@gmx.net>
> >
-- 
Andreas Kohn <andreas.kohn@gmx.net>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1064790358.939.33.camel>