Date: Fri, 3 Oct 2008 13:43:24 +0100 From: Matt Dawson <matt@chronos.org.uk> To: freebsd-x11@freebsd.org Subject: Re: freebsd-x11 Digest, Vol 251, Issue 4 Message-ID: <200810031343.30527.matt@chronos.org.uk> In-Reply-To: <20081002120027.2D3C810657AE@hub.freebsd.org> References: <20081002120027.2D3C810657AE@hub.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
--nextPart1813207.erhbqbdNH5 Content-Type: multipart/mixed; boundary="Boundary-01=_tNh5IeOl8vpK8TO" Content-Transfer-Encoding: 7bit Content-Disposition: inline --Boundary-01=_tNh5IeOl8vpK8TO Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: quoted-printable Content-Disposition: inline On Thursday 02 October 2008 13:00:27 freebsd-x11-request@freebsd.org wrote: > I have made new patch sets for both -CURRENT and -STABLE. =A0They are > located at: > > http://people.freebsd.org/~rnoland/drm-update-7-100108.patch.bz2 > http://people.freebsd.org/~rnoland/drm-update-8-100108.patch.bz2 > > Note that if your are using RELENG_7, you will need to be very current. > i.e. on or after 2008-09-29 16:20:13 -0400. =A0CURRENT should be at least > 2008-09-20 15:56:02 -0400. Results from 7-STABLE csupped last night on my myriad of Radions are attach= ed.=20 The only issues I have are with the Xpress 200 chipset, but since this warn= s=20 you that it may kick your cat, run off with your significant other and roam= =20 the streets at night eating babies any time you try to do anything in 3D, I= =20 expect this is normal. =2D-=20 Matt Dawson matt@chronos.org.uk MTD15-RIPE --Boundary-01=_tNh5IeOl8vpK8TO Content-Type: text/plain; charset="iso-8859-15"; name="Xpress200_DRM_report" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="Xpress200_DRM_report" Xorg.0.log (--) PCI:*(1:5:0) ATI Technologies Inc RS485 [Radeon Xpress 1100 IGP] rev 0= , Mem @ 0xd0000000/28, 0xfeaf0000/16, I/O @ 0xd800/8, BIOS @ 0xfeac0000/17 [...] (II) Primary Device is: PCI 01:05:0 (--) Chipset ATI Radeon XPRESS 200M 5975 (PCIE) found [...] (II) RADEON(0): Direct rendering enabled (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards. (II) RADEON(0): num pipes is 3 dmesg vgapci0: <VGA-compatible display> port 0xd800-0xd8ff mem 0xd0000000-0xdffff= fff,0xfeaf0000-0xfeafffff irq 17 at device 5.0 on pci1 =20 drm0: <ATI Radeon RS485 XPRESS 1100 IGP> on vgapci0=20 [...] info: [drm] Setting GART location based on new memory map info: [drm] Loading R300 Microcode info: [drm] Num pipes: 3 info: [drm] writeback test succeeded in 1 usecs drm0: [ITHREAD] pciconf -lv vgapci0@pci0:1:5:0: class=3D0x030000 card=3D0x0f641019 chip=3D0x5975100= 2 rev=3D0x00 hdr=3D0x00 vendor =3D 'ATI Technologies Inc' device =3D 'Radeon XPRESS 200M SERIES' class =3D display subclass =3D VGA 125-138 fps on engine demo glexcess completes but with artifacts --Boundary-01=_tNh5IeOl8vpK8TO Content-Type: text/plain; charset="iso-8859-15"; name="X850_DRM_report" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="X850_DRM_report" Xorg.0.log (--) PCI:*(3:0:0) ATI Technologies Inc R480 [Radeon X850XT (PCIE)] (Primary= ) rev 0, Mem @ 0xa0000000/28, 0xd0000000/16, I/O @ 0xc000/8, BIOS @ 0xdfee0= 000/17 (--) PCI: (3:0:1) ATI Technologies Inc R480 [Radeon X850XT (PCIE)] (Seconda= ry) rev 0, Mem @ 0xc8000000/16 [...] (II) Primary Device is: PCI 03:00:0 (WW) RADEON: No matching Device section for instance (BusID PCI:3:0:1) found (--) Chipset ATI Radeon X850 XT (R480) (PCIE) found [...] (II) RADEON(0): Direct rendering enabled (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards. (II) RADEON(0): num pipes is 4 dmesg vgapci0: child drm0 requested pci_enable_busmaster = = =20 info: [drm] Initialized radeon 1.29.0 20080613 = = =20 vgapci1: <VGA-compatible display> mem 0xc8000000-0xc800ffff at device 0.1 o= n pci3 [...] info: [drm] Setting GART location based on new memory map info: [drm] Loading R400 Microcode info: [drm] Num pipes: 4 info: [drm] writeback test succeeded in 1 usecs drm0: [ITHREAD] pciconf -lv vgapci0@pci0:3:0:0: class=3D0x030000 card=3D0x0b121002 chip=3D0x5d52100= 2 rev=3D0x00 hdr=3D0x00 vendor =3D 'ATI Technologies Inc' device =3D 'Radeon X850 Series' class =3D display subclass =3D VGA vgapci1@pci0:3:0:1: class=3D0x038000 card=3D0x0b131002 chip=3D0x5d72100= 2 rev=3D0x00 hdr=3D0x00 vendor =3D 'ATI Technologies Inc' device =3D 'Radeon X850 Series - Secondary' class =3D display 310 fps on engine demo glexcess completes without issue --Boundary-01=_tNh5IeOl8vpK8TO Content-Type: text/plain; charset="iso-8859-15"; name="9700_DRM_report" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="9700_DRM_report" Xorg.0.log (--) PCI:*(1:0:0) ATI Technologies Inc Radeon R300 ND [Radeon 9700 Pro] rev= 0, Mem @ 0xd0000000/27, 0xe1000000/16, I/O @ 0x9000/8 (--) PCI: (1:0:1) ATI Technologies Inc Radeon R300 [Radeon 9700 Pro] (Secon= dary) rev 0, Mem @ 0xd8000000/27, 0xe1010000/16 [...] (II) Primary Device is: PCI 01:00:0 (--) Assigning device section with no busID to primary device (WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found (--) Chipset ATI Radeon 9700 Pro ND (AGP) found [...] (II) RADEON(0): Direct rendering enabled (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards. (II) RADEON(0): num pipes is 2 dmesg vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem 0xd0000000-0xd7fff= fff,0xe1000000-0xe100ffff irq 16 at device 0.0 on pci1 =20 drm0: <ATI Radeon ND R300 9700 Pro> on vgapci0 = =20 vgapci0: child drm0 requested pci_enable_busmaster = =20 info: [drm] AGP at 0xc0000000 256MB = =20 info: [drm] Initialized radeon 1.29.0 20080613 [...] info: [drm] Setting GART location based on new memory map = =20 info: [drm] Loading R300 Microcode = =20 info: [drm] Num pipes: 2 = =20 info: [drm] writeback test succeeded in 1 usecs = =20 drm0: [ITHREAD] pciconf -lv vgapci0@pci0:1:0:0: class=3D0x030000 card=3D0x00041002 chip=3D0x4e44100= 2 rev=3D0x00 hdr=3D0x00 vendor =3D 'ATI Technologies Inc' device =3D 'Radeon 9700/Pro, 9500 Series (R300)' class =3D display subclass =3D VGA vgapci1@pci0:1:0:1: class=3D0x038000 card=3D0x00051002 chip=3D0x4e64100= 2 rev=3D0x00 hdr=3D0x00 vendor =3D 'ATI Technologies Inc' device =3D 'Radeon 9700/Pro, 9500 (R300) Series - Secondary' class =3D display 245 fps on engine demo glexcess completes without issue --Boundary-01=_tNh5IeOl8vpK8TO Content-Type: text/plain; charset="iso-8859-15"; name="X850_SMP_DRM_report" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="X850_SMP_DRM_report" Xorg.0.log (--) PCI:*(3:0:0) ATI Technologies Inc R480 [Radeon X850XT (PCIE)] (Primary= ) rev 0, Mem @ 0xa0000000/28, 0xd0000000/16, I/O @ 0xb000/8, BIOS @ 0xdfde0= 000/17 (--) PCI: (3:0:1) ATI Technologies Inc R480 [Radeon X850XT (PCIE)] (Seconda= ry) rev 0, Mem @ 0xc8000000/16 [...] (II) Primary Device is: PCI 03:00:0 (WW) RADEON: No matching Device section for instance (BusID PCI:3:0:1) found (--) Chipset ATI Radeon X850 XT (R480) (PCIE) found [...] (II) RADEON(0): Direct rendering enabled (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards. (II) RADEON(0): num pipes is 4 dmesg vgapci0: <VGA-compatible display> port 0xb000-0xb0ff mem 0xa0000000-0xaffff= fff,0xd0000000-0xd000ffff irq 16 at device 0.0 on pci3 = =20 drm0: <ATI Radeon R480 X850 XT> on vgapci0 = = =20 vgapci0: child drm0 requested pci_enable_busmaster = = =20 info: [drm] Initialized radeon 1.29.0 20080613=20 [...] info: [drm] Setting GART location based on new memory map info: [drm] Loading R400 Microcode info: [drm] Num pipes: 4 info: [drm] writeback test succeeded in 1 usecs drm0: [ITHREAD] pciconf -lv vgapci0@pci0:3:0:0: class=3D0x030000 card=3D0x0b121002 chip=3D0x5d52100= 2 rev=3D0x00 hdr=3D0x00 vendor =3D 'ATI Technologies Inc' device =3D 'Radeon X850 Series' class =3D display subclass =3D VGA vgapci1@pci0:3:0:1: class=3D0x038000 card=3D0x0b131002 chip=3D0x5d72100= 2 rev=3D0x00 hdr=3D0x00 vendor =3D 'ATI Technologies Inc' device =3D 'Radeon X850 Series - Secondary' class =3D display 330 fps on engine demo glexcess completes without issue --Boundary-01=_tNh5IeOl8vpK8TO Content-Type: text/plain; charset="iso-8859-15"; name="9200_DRM_report" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="9200_DRM_report" Xorg.0.log (--) PCI:*(1:0:0) ATI Technologies Inc RV280 [Radeon 9200] rev 1, Mem @ 0xd= 0000000/27, 0xe1000000/16, I/O @ 0x9000/8 (--) PCI: (1:0:1) ATI Technologies Inc RV280 [Radeon 9200] (Secondary) rev = 1, Mem @ 0xd8000000/27, 0xe1010000/16 [...] (II) Primary Device is: PCI 01:00:0 (--) Assigning device section with no busID to primary device (WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found (--) Chipset ATI Radeon 9200 5961 (AGP) found [...] (II) RADEON(0): Direct rendering enabled (II) RADEON(0): Render acceleration enabled for R200 type cards. dmesg vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem 0xd0000000-0xd7fff= fff,0xe1000000-0xe100ffff irq 16 at device 0.0 on pci1 =20 drm0: <ATI Radeon RV280 9200> on vgapci0 = =20 vgapci0: child drm0 requested pci_enable_busmaster = =20 info: [drm] AGP at 0xc0000000 256MB = =20 info: [drm] Initialized radeon 1.29.0 20080613 [...] info: [drm] Setting GART location based on new memory map = =20 info: [drm] Loading R200 Microcode = =20 info: [drm] writeback test succeeded in 1 usecs = =20 drm0: [ITHREAD] pciconf -lv vgapci0@pci0:1:0:0: class=3D0x030000 card=3D0x013218bc chip=3D0x5961100= 2 rev=3D0x01 hdr=3D0x00 vendor =3D 'ATI Technologies Inc' device =3D 'RV280 ATI RADEON 9200 se agp' class =3D display subclass =3D VGA vgapci1@pci0:1:0:1: class=3D0x038000 card=3D0x013318bc chip=3D0x5941100= 2 rev=3D0x01 hdr=3D0x00 vendor =3D 'ATI Technologies Inc' device =3D 'RV280 ATI Radeon 9200 - Secondary' class =3D display 120 FPS on engine demo glexcess completes without issue --Boundary-01=_tNh5IeOl8vpK8TO-- --nextPart1813207.erhbqbdNH5 Content-Type: application/pgp-signature; name=signature.asc Content-Description: This is a digitally signed message part. -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.9 (FreeBSD) iEYEABECAAYFAkjmE3IACgkQAmT9uY8euiIbHgCggshUNPs1bfpqHAvA4Y5zke8p DtwAoIX9LrxnOTp87PCB0ckhMqJDM82g =HO+Q -----END PGP SIGNATURE----- --nextPart1813207.erhbqbdNH5--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200810031343.30527.matt>