Date: Fri, 9 Mar 2001 21:42:57 -0500 From: "Andrew C. Hornback" <hornback@wireco.net> To: "Wai Chan" <waichan@hpu.edu> Cc: <questions@FreeBSD.ORG> Subject: RE: ProLiant 1500 questions... Message-ID: <01c301c0a90b$d0f0f2c0$0f00000a@eagle> In-Reply-To: <LNEJKGADPHKMLOFLNLFLKEELEHAA.waichan@hpu.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
Wai Chan, Thanks for the info. I've redone the entire installation, compiled the kernel, got all of the memory and both processors running. I sincerely appreciate the help. But, I have run into another small problem. Occasionally, on boot, it will give me the following: ida0: <Compaq SMART2/P array controller> port 0x8000-0x80ff mem 0x42000000-0x43ffffff, 0x40000000-0x400000ff irq 11 at device 0.0 on pci1 panic: ida_wait: timeout waiting for completion mp_lock = 00000001; cpuid = 0; lapic.id=00000000 Uptime: 0s Automatic reboot in 15 seconds - press a key on the console to abort When we did the previous installation, the friend of mine that set it up put in a larger pause delay earlier in the booting process. He told me that he set it up to load and unload the kernel four times, which would give the drives a chance to settle so that the controller could be queried properly. Any ideas on remedying this problem? Thanks, --- Andy > -----Original Message----- > From: Wai Chan [mailto:waichan@hpu.edu] > Sent: Monday, March 05, 2001 12:51 PM > To: Andrew C. Hornback; questions@FreeBSD.ORG > Subject: RE: ProLiant 1500 questions... > > > To get smp working: > " Boot the system with the Compaq System Configuration disks. Press > CTRL-A at the main menu to get into the advanced mode. Select > "Configure hardware" from the menus. Then select "View and > edit details". > Scroll down to the "Advanced features" section and set the processor > APIC mode to "Full Table". Save the new hardware configuration to > CMOS. Reboot the system. " > > Make FreeBSD to see all 64MB RAM instead of 16MB RAM: > Add this to your kernel > options MAXMEM="(64*1024)" > > -- > Wai Chan. > > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Andrew C. > Hornback > Sent: Monday, March 05, 2001 01:06 AM > To: questions@FreeBSD.ORG > Subject: ProLiant 1500 questions... > > > Good morning everyone, > > I'm doing some work on my Compaq ProLiant 1500 box, > and was wondering > if I could get some help. > > First of all, it's a dual P133 with 64 Megs of RAM, > and I'm having a > hellacious time getting both processors to work properly in > it. Right > now, it runs on a single processor, and flies... but I know it would > be faster with the second one running. I know there is a > working SMP > kernel on it, because I had it running with both processors at one > time, but I had to shelf the project for a couple of months and now > that I'm back to it, I've forgotten what I did to invoke > that kernel. > > Secondly, I want to limit the number of services that > this machine > runs, since it is going to be the firewall for my network, and I was > wondering if anyone had a list of all of the services that > the default > installation of 4.2-Release included. > > Thanks, > > --- Andy > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?01c301c0a90b$d0f0f2c0$0f00000a>