Date: Mon, 10 Feb 2014 05:13:13 +0100 From: Bernd Walter <ticso@cicely7.cicely.de> To: Ian Lepore <ian@freebsd.org> Cc: freebsd-arm <freebsd-arm@freebsd.org>, Bernd Walter <ticso@cicely7.cicely.de> Subject: Re: wandboard / imx6 / exynos4 / cortex-a9 "wrong-endian bug" fixed Message-ID: <20140210041313.GB89777@cicely7.cicely.de> In-Reply-To: <20140202230450.GA42331@cicely7.cicely.de> References: <1391371204.13026.43.camel@revolution.hippie.lan> <20140202230450.GA42331@cicely7.cicely.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, Feb 03, 2014 at 12:04:50AM +0100, Bernd Walter wrote:
> On Sun, Feb 02, 2014 at 01:00:04PM -0700, Ian Lepore wrote:
> > As some of you know from previous email or irc conversations, I've been
> > chasing a strange bug for months that affects some cortex-a9 chips,
> > which I've been calling the "wrong-endian bug", where some registers get
> > restored with wrong-endian values on return from an interrupt, leading
> > to a panic or crash during boot.
>
> This is very great news and a pretty amazing job to find this.
> Thank you very much!
> In the end it also exaplains the tempeerature dependency on the
> Wandboards and why it always happened on my MarSboard.
> Unfortunately I'm still time contrained, but likely I will at least
> find enough time to do some tests on my iMX6 board collection next
> weekend.
I did build recent current (R261700) with recent crochet.
This is the result:
U-Boot 2013.10 (Feb 10 2014 - 00:35:13)
CPU: Freescale i.MX6Q rev1.2 at 792 MHz
Reset cause: POR
Board: Wandboard
DRAM: 2 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: FEC [PRIME]
Hit any key to stop autoboot: 0
mmc0 is current device
SD/MMC found on device 0
reading uEnv.txt
59 bytes read in 10 ms (4.9 KiB/s)
Importing environment from mmc (uEnv.txt)...
Checking if uenvcmd is set ...
Running uenvcmd ...
reading kernel.bin
4989960 bytes read in 261 ms (18.2 MiB/s)
## Starting application at 0x12000000 ...
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #0 r261700M: Mon Feb 10 03:28:27 CET 2014
ticso@cicely1.cicely.de:/root/crochet-freebsd/work/obj/arm.armv6/home/builder/bbb/head/sys/WANDBOARD-QUAD arm
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
Preloaded elf kernel "kernel" at 0xc24e0c6c.
CPU: Cortex A9-r2 rev 10 (Cortex-A core)
Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
WB disabled EABT branch prediction enabled
LoUU:2 LoC:1 LoUIS:2
Cache level 1:
32KB/32B 4-way data cache WB Read-Alloc Write-Alloc
32KB/32B 4-way instruction cache Read-Alloc
real memory = 2147483648 (2048 MB)
avail memory = 2095058944 (1998 MB)
Physical memory chunk(s):
0x10000000 - 0x8fffffff, 2048 MB ( 524288 pages)
Excluded memory regions:
0x12000000 - 0x1261ffff, 6 MB ( 1568 pages) NoAlloc
Static device mappings:
0x00a00000 - 0x00afffff mapped at VA 0xffe00000
0x02000000 - 0x020fffff mapped at VA 0xffd00000
0x02100000 - 0x021fffff mapped at VA 0xffc00000
random device not loaded; using insecure entropy
null: <null device, zero device>
openfirm: <Open Firmware control device>
mem: <memory>
Falling back to <Software, Yarrow> random adaptor
random: <Software, Yarrow> initialized
nfslock: pseudo-device
ofwbus0: <Open Firmware Device Tree>
ofwbus0: <cpus> type unknown (no driver attached)
simplebus0: <Flattened device tree simple bus> on ofwbus0
gic0: <ARM Generic Interrupt Controller> mem 0xa01000-0xa01fff,0xa00100-0xa001ff on simplebus0
gic0: pn 0x390, arch 0x1, rev 0x2, implementer 0x43b sc->nirqs 160
l2cache0: <PL310 L2 cache controller> mem 0xa02000-0xa02fff irq 124 on simplebus0
l2cache0: Part number: 0x3, release: 0x7
l2cache0: L2 Cache: 1024KB/32B 16 ways
l2cache0: L2 Cache enabled
l2cache0: Early BRESP response: disabled
l2cache0: Instruction prefetch: disabled
l2cache0: Data prefetch: disabled
l2cache0: Non-secure interrupt control: disabled
l2cache0: Non-secure lockdown: disabled
l2cache0: Share override: disabled
l2cache0: Double linefil: disabled
l2cache0: Instruction prefetch: disabled
l2cache0: Data prefetch: disabled
l2cache0: Double linefill on WRAP request: disabled
l2cache0: Prefetch drop: disabled
l2cache0: Incr double Linefill: disabled
l2cache0: Not same ID on exclusive sequence: disabled
l2cache0: Prefetch offset: 0
simplebus1: <Flattened device tree simple bus> mem 0x2000000-0x20fffff on simplebus0
ccm0: <Freescale i.MX6 Clock Control Module> mem 0x20c4000-0x20c7fff irq 119,120 on simplebus1
imx6_anatop0: <Freescale i.MX6 Analog PLLs and Power> mem 0x20c8000-0x20c8fff on simplebus1
imx_gpt0: <Freescale i.MX GPT timer> mem 0x2098000-0x209bfff irq 87 on simplebus1
imx_gpt0: Running on 11000KHz clock, base freq 66000000Hz CR=0x0000027d, PR=0x00000005
Event timer "i.MXxxx GPT Eventtimer" frequency 11000000 Hz quality 1000
Timecounter "i.MX GPT Timecounter" frequency 11000000 Hz quality 1000
uart0: <imx_uart> mem 0x2020000-0x2023fff irq 58 on simplebus1
uart0: console (115200,n,8,1)
uart0: fast interrupt
simplebus1: <serial@021e8000> mem 0x21e8000-0x21ebfff irq 59 type unknown (no driver attached)
simplebus1: <serial@021ec000> mem 0x21ec000-0x21effff irq 60 type unknown (no driver attached)
simplebus1: <serial@021f0000> mem 0x21f0000-0x21f3fff irq 61 type unknown (no driver attached)
simplebus1: <serial@021f4000> mem 0x21f4000-0x21f7fff irq 62 type unknown (no driver attached)
usbphy0: <Freescale i.MX6 USB PHY> mem 0x20c9000-0x20c9fff irq 44 on simplebus1
usbphy1: <Freescale i.MX6 USB PHY> mem 0x20ca000-0x20cafff irq 45 on simplebus1
simplebus2: <Flattened device tree simple bus> mem 0x2100000-0x21fffff on simplebus0
ffec0: <Freescale Gigabit Ethernet Controller> mem 0x2188000-0x218bfff irq 150,151 on simplebus2
ffec0: MAC address 00:1f:7b:b4:08:81:
ffec0: PHY preamble disabled
miibus0: <MII bus> on ffec0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 1 on miibus0
atphy0: OUI 0x00c82e, model 0x0007, rev. 4
atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
ffec0: bpf attached
ffec0: Ethernet address: 00:1f:7b:b4:08:81
ehci0: <Freescale i.MX integrated USB controller> mem 0x2184000-0x21841ff irq 75 on simplebus2
ehci0: [GIANT-LOCKED]
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci0: usbpf: Attached
ehci1: <Freescale i.MX integrated USB controller> mem 0x2184200-0x21843ff irq 72 on simplebus2
ehci1: [GIANT-LOCKED]
usbus1: EHCI version 1.0
usbus1 on ehci1
ehci1: usbpf: Attached
simplebus2: <usb@02184400> mem 0x2184400-0x21845ff irq 73 type unknown (no driver attached)
simplebus2: <usb@02184600> mem 0x2184600-0x21847ff irq 74 type unknown (no driver attached)
simplebus2: <usbmisc@02184800> mem 0x2184800-0x21849ff type unknown (no driver attached)
simplebus2: <usdhc@02190000> mem 0x2190000-0x2193fff irq 54 type unknown (no driver attached)
sdhci_imx0: <Freescale uSDHC controller> mem 0x2194000-0x2197fff irq 55 on simplebus2
sdhci_imx0-slot0: 200MHz HS 4bits 3.3V 3.0V PIO
sdhci_imx0-slot0: ============== REGISTER DUMP ==============
sdhci_imx0-slot0: Sys addr: 0x00000000 | Version: 0x00000002
sdhci_imx0-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000001
sdhci_imx0-slot0: Argument: 0x00000000 | Trn mode: 0x00000000
sdhci_imx0-slot0: Present: 0xff888088 | Host ctl: 0x00000000
sdhci_imx0-slot0: Power: 0x0000000d | Blk gap: 0x00000080
sdhci_imx0-slot0: Wake-up: 0x00000008 | Clock: 0x00000002
sdhci_imx0-slot0: Timeout: 0x00000080 | Int stat: 0x00000000
sdhci_imx0-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb
sdhci_imx0-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_imx0-slot0: Caps: 0x0377c800 | Max curr: 0x80000000
sdhci_imx0-slot0: ===========================================
sdhci_imx1: <Freescale uSDHC controller> mem 0x2198000-0x219bfff irq 56 on simplebus2
sdhci_imx1-slot0: 200MHz HS 4bits 3.3V 3.0V PIO
sdhci_imx1-slot0: ============== REGISTER DUMP ==============
sdhci_imx1-slot0: Sys addr: 0x00000000 | Version: 0x00000002
sdhci_imx1-slot0: Blk size: 0x00000200 | Blk cnt: 0x00000001
sdhci_imx1-slot0: Argument: 0x000095ea | Trn mode: 0x00000011
sdhci_imx1-slot0: Present: 0xff8d8088 | Host ctl: 0x00000002
sdhci_imx1-slot0: Power: 0x0000000d | Blk gap: 0x00000080
sdhci_imx1-slot0: Wake-up: 0x00000000 | Clock: 0x00000002
sdhci_imx1-slot0: Timeout: 0x0000008b | Int stat: 0x00000000
sdhci_imx1-slot0: Int enab: 0x017f00fb | Sig enab: 0x017f00fb
sdhci_imx1-slot0: AC12 err: 0x00000000 | Slot int: 0x00000000
sdhci_imx1-slot0: Caps: 0x0377c800 | Max curr: 0x80000011
sdhci_imx1-slot0: ===========================================
mmc0: <MMC/SD bus> on sdhci_imx1
simplebus2: <usdhc@0219c000> mem 0x219c000-0x219ffff irq 57 type unknown (no driver attached)
Timecounters tick every 4.000 msec
vlan: initialized, using hash tables with chaining
tcp_init: net.inet.tcp.tcbhashsize auto tuned to 16384
lo0: bpf attached
sdhci_imx1-slot0: Divider 250 for freq 400000 (max 200000000)
mmc0: Probing bus
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
mmc0: SD 2.0 interface conditions: OK
mmc0: SD probe: OK (OCR: 0x00ff8000)
mmc0: Current OCR: 0x00ff8000
ugen0.1: <Freescale> at usbus0
uhub0: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Freescale> at usbus1
uhub1: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
mmc0: Probing cards
mmc0: New card detected (CID 824a544e43617264104010014400d500)
mmc0: New card detected (CSD 400e00325b5900003b3d7f800a400000)
mmc0: Card at relative address 0xb368 added:
mmc0: card: SDHC NCard 1.0 SN 1074790724 MFG 05/2013 by 130 JT
mmc0: bus: 4bit, 50MHz, high speed timing
mmc0: memory: 15529984 blocks, erase sector 8192 blocks
mmc0: setting transfer rate to 50.000MHz (high speed timing)
sdhci_imx1-slot0: Divider 2 for freq 50000000 (max 200000000)
mmcsd0: 8GB <SDHC NCard 1.0 SN 1074790724 MFG 05/2013 by 130 JT> at mmc0 50.0MHz/4bit/65535-block
GEOM: new disk mmcsd0
mmc0: setting bus width to 4 bits
GEOM_PART: partition 1 is not aligned on 4194304 bytes
GEOM_PART: partition 2 is not aligned on 4194304 bytes
GEOM_PART: partition 1 is not aligned on 4194304 bytes
GEOM_PART: partition 1 is not aligned on 4194304 bytes
random: unblocking device.
Root mount waiting for: usbus1 usbus0
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
Spurious interrupt detected [0x000003ff]
ugen1.2: <vendor 0x0451> at usbus1
uhub2: <vendor 0x0451 product 0x8042, class 9/0, rev 2.00/1.00, addr 2> on usbus1
uhub2: MTT enabled
Root mount waiting for: usbus1
uhub2: 4 ports with 4 removable, self powered
ugen1.3: <Logitech> at usbus1
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3> on usbus1
Trying to mount root from ufs:mmcsd0s2a []...
warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
Enlarging root partition
GEOM_PART: mmcsd0s2 was automatically resized
GEOM_PART: partition 1 is not aligned on 4194304 bytes
GEOM: Reconfigure ufsid/52f839542ea1d0a7, start 0 length 7887366144 end 7887366143
vm_fault(0xc24e4560, 0, 1, 0) -> 1
Fatal kernel mode data abort: 'Translation Fault (P)'
trapframe: 0xf4723d68
FSR=00000017, FAR=00000038, spsr=60000113
r0 =c6e39f00, r1 =c240670f, r2 =00000000, r3 =c6e3a2e0
r4 =c6fd9600, r5 =00000000, r6 =00000000, r7 =00000001
r8 =d61fa800, r9 =00000001, r10=00000000, r11=f4723dc0
r12=00000001, ssp=f4723db8, slr=c211b354, pc =c211b35c
[ thread pid 12 tid 100006 ]
Stopped at g_part_modevent+0x3988: ldrb r0, [r5, #0x038]
Tracing pid 12 tid 100006 td 0xc6d3f640
db_trace_self() at db_trace_self
pc = 0xc23bdc50 lr = 0xc203dfec (db_hex2dec+0x498)
sp = 0xf4723a68 fp = 0xf4723a80
r10 = 0xc2496550
db_hex2dec() at db_hex2dec+0x498
pc = 0xc203dfec lr = 0xc203d99c (db_command_loop+0x2f0)
sp = 0xf4723a88 fp = 0xf4723b28
r4 = 0x00000000 r5 = 0x00000000
r6 = 0xc2427755
db_command_loop() at db_command_loop+0x2f0
pc = 0xc203d99c lr = 0xc203d70c (db_command_loop+0x60)
sp = 0xf4723b30 fp = 0xf4723b40
r4 = 0xc23fc5b8 r5 = 0xc240d0de
r6 = 0xc24e32bc r7 = 0xf4723d68
r8 = 0xc24e4560 r9 = 0xc24d9614
r10 = 0xc24967c0
db_command_loop() at db_command_loop+0x60
pc = 0xc203d70c lr = 0xc20401cc (X_db_symbol_values+0x254)
sp = 0xf4723b48 fp = 0xf4723c68
r4 = 0x00000000 r5 = 0xf4723b50
r6 = 0xc24d9640
X_db_symbol_values() at X_db_symbol_values+0x254
pc = 0xc20401cc lr = 0xc21cec94 (kdb_trap+0xcc)
sp = 0xf4723c70 fp = 0xf4723c90
r4 = 0x00000000 r5 = 0x00000017
r6 = 0xc24d9640 r7 = 0xf4723d68
kdb_trap() at kdb_trap+0xcc
pc = 0xc21cec94 lr = 0xc23d1190 (data_abort_handler+0x7d0)
sp = 0xf4723c98 fp = 0xf4723cb0
r4 = 0xf4723d68 r5 = 0x600001d3
r6 = 0x00000038 r7 = 0x00000017
r8 = 0xc24e4560 r9 = 0x00000001
r10 = 0xf4723d68
data_abort_handler() at data_abort_handler+0x7d0
pc = 0xc23d1190 lr = 0xc23d0f60 (data_abort_handler+0x5a0)
sp = 0xf4723cb8 fp = 0xf4723d60
r4 = 0x00000017 r5 = 0xc6d3f640
r6 = 0xc6d3cd2c r7 = 0x00000004
data_abort_handler() at data_abort_handler+0x5a0
pc = 0xc23d0f60 lr = 0xc23bfa58 (exception_exit)
sp = 0xf4723d68 fp = 0xf4723dc0
r4 = 0xc6fd9600 r5 = 0x00000000
r6 = 0x00000000 r7 = 0x00000001
r8 = 0xd61fa800 r9 = 0x00000001
r10 = 0x00000000
exception_exit() at exception_exit
pc = 0xc23bfa58 lr = 0xc211b354 (g_part_modevent+0x3980)
sp = 0xf4723db8 fp = 0xf4723dc0
r0 = 0xc6e39f00 r1 = 0xc240670f
r2 = 0x00000000 r3 = 0xc6e3a2e0
r4 = 0xc6fd9600 r5 = 0x00000000
r6 = 0x00000000 r7 = 0x00000001
r8 = 0xd61fa800 r9 = 0x00000001
r10 = 0x00000000 r12 = 0x00000001
g_part_modevent() at g_part_modevent+0x3988
pc = 0xc211b35c lr = 0xc2112f88 (g_resize_provider+0x144)
sp = 0xf4723dc8 fp = 0xf4723de0
r4 = 0xc6e3a280 r5 = 0xc6fd9640
g_resize_provider() at g_resize_provider+0x144
pc = 0xc2112f88 lr = 0xc210dbdc (g_run_events+0x348)
sp = 0xf4723de8 fp = 0xf4723e28
r4 = 0xc7029d00 r5 = 0x00000034
r6 = 0x00000001 r7 = 0x00000004
r8 = 0x00000100
g_run_events() at g_run_events+0x348
pc = 0xc210dbdc lr = 0xc2110644 (g_init+0x270)
sp = 0xf4723e30 fp = 0xf4723e38
r4 = 0xc24ca480 r5 = 0xc6d3cc80
r6 = 0xc21105dc r7 = 0x00000000
r8 = 0xf4723e60 r9 = 0x00000000
r10 = 0x00000000
g_init() at g_init+0x270
pc = 0xc2110644 lr = 0xc2154d94 (fork_exit+0x84)
sp = 0xf4723e40 fp = 0xf4723e58
r4 = 0xc6d3f640
fork_exit() at fork_exit+0x84
pc = 0xc2154d94 lr = 0xc23d0868 (fork_trampoline+0x14)
sp = 0xf4723e60 fp = 0x00000000
r4 = 0xc21105dc r5 = 0x00000000
r6 = 0xffffffff r7 = 0xffddfdff
r8 = 0x00000000
fork_trampoline() at fork_trampoline+0x14
pc = 0xc23d0868 lr = 0xc23d0868 (fork_trampoline+0x14)
sp = 0xf4723e60 fp = 0x00000000
Unable to unwind further
db>
This is a Wandboard-Quad, but installed on an EDM1-FAIRY carrier with
USB wireless keyboard/Mice plug.
Probably because of the partition resizing, which happened on first boot.
Second boot worked better, but booting hanged after devd.
...
warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
Enlarging root partition
mmcsd0s2 resized
GEOM: Reconfigure ufsid/52f839542ea1d0a7, start 0 length 7883179520 end 7883179519
mmcsd0s2a resized
super-block backups (for fsck_ffs -b #) at:
1736896, 2171072, 2605248, 3039424, 3473600, 3907776, 4341952, 4776128,
5210304, 5644480, 6078656, 6512832, 6947008, 7381184, 7815360, 8249536,
8683712, 9117888, 9552064, 9986240, 10420416, 10854592, 11288768, 11722944,
12157120, 12591296, 13025472, 13459648, 13893824, 14328000, 14762176, 15196352
growfs: /: cannot reload filesystem: No such file or directory
Setting hostuuid: 25296a97-91fb-11e3-9bee-001f7bb40881.
Setting hostid: 0xbdcabc30.
No suitable dump device was found.
Entropy harvesting: interrupts ethernet point_to_point swi.
Starting file system checks:
/dev/mmcsd0s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/mmcsd0s2a: clean, 1769411 free (867 frags, 221068 blocks, 0.0% fragmentation)
Mounting local file systems:.
Writing entropy file:.
Setting hostname: wandboard.
ffec0: link state changed to DOWN
Starting Network: lo0 ffec0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
ffec0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether 00:1f:7b:b4:08:81
media: Ethernet autoselect (none)
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
load: 1.21 cmd: sh 17 [wait] 12.01r 0.04u 0.08s 0% 2156k
load: 1.21 cmd: sh 17 [wait] 12.21r 0.04u 0.08s 0% 2156k
^CScript /etc/rc.d/devd interrupted
Starting pflogd:
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Generating host.conf.
Waiting 30s for the default route interface: ^CScript /etc/rc.d/defaultroute interrupted
Creating and/or trimming log files.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Starting casperd.
Clearing /tmp (X related).
Updating motd:.
Mounting late file systems:.
Generating RSA1 host key.
2048 69:5f:25:fe:79:98:9f:68:db:c3:19:00:b5:97:d9:b8 root@wandboard (RSA1)
Generating RSA host key.
2048 23:3c:ec:47:93:9e:d3:c8:f7:f5:b5:ca:51:8d:f4:bf root@wandboard (RSA)
Generating DSA host key.
1024 40:9f:34:a8:ac:c9:eb:bb:21:dd:74:fa:9a:cf:77:78 root@wandboard (DSA)
Generating ECDSA host key.
256 02:b3:75:0b:d0:fa:a3:57:21:7f:a7:28:ba:1e:1c:67 root@wandboard (ECDSA)
Generating ED25519 host key.
256 84:71:ba:a6:46:87:98:ad:bc:cb:2d:d7:da:45:4b:9f root@wandboard (ED25519)
Performing sanity check on sshd configuration.
Starting sshd.
Starting background file system checks in 60 seconds.
Mon Feb 10 02:29:26 UTC 2014
FreeBSD/arm (wandboard) (ttyu0)
login: root
load: 1.21 cmd: login 710 [nanslp] -1.44r 0.00u 0.05s 0% 2768k
load: 1.21 cmd: login 710 [nanslp] -1.48r 0.00u 0.05s 0% 2768k
load: 1.21 cmd: login 710 [nanslp] 0.00r 0.00u 0.05s 0% 2768k
Looks a bit like ethernet problems, but also no console login.
3rd (and all subsequent) boot was good:
...
uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3> on usbus1
Trying to mount root from ufs:mmcsd0s2a []...
WARNING: /root/crochet-freebsd/work/_.mount.freebsd was not properly dismounted
warning: no time-of-day clock registered, system time will not be set accurately
start_init: trying /sbin/init
Enlarging root partition
mmcsd0s2 resized
mmcsd0s2a resized
growfs: requested size 7.3GB is not larger than the current filesystem size 7.3GB
Setting hostuuid: 25cdf977-91fb-11e3-9e1b-001f7bb40881.
Setting hostid: 0x91e2b130.
No suitable dump device was found.
Entropy harvesting: interrupts ethernet point_to_point swi.
Starting file system checks:
** SU+J Recovering /dev/mmcsd0s2a
** Reading 4194304 byte journal from inode 4.
** Building recovery table.
** Resolving unreferenced inode list.
** Processing journal entries.
** 6 journal records in 1024 bytes for 18.75% utilization
** Freed 0 inodes (0 dirs) 0 blocks, and 0 frags.
***** FILE SYSTEM MARKED CLEAN *****
Mounting local file systems:.
Writing entropy file:.
Setting hostname: wandboard.
ffec0: link state changed to DOWN
Starting Network: lo0 ffec0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
ffec0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=80008<VLAN_MTU,LINKSTATE>
ether 00:1f:7b:b4:08:81
media: Ethernet autoselect (none)
status: no carrier
nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
ffec0: link state changed to UP
link_elf: symbol genkbd_get_fkeystr undefined
kldload: can't load ukbd: No such file or directory
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 3> on usbus1
ums0: 16 buttons and [XYZT] coordinates ID=2
Starting dhclient.
DHCPDISCOVER on ffec0 to 255.255.255.255 port 67 interval 3
DHCPOFFER from 10.1.1.4
DHCPREQUEST on ffec0 to 255.255.255.255 port 67
DHCPACK from 10.1.1.4
bound to 10.1.1.133 -- renewal in 43200 seconds.
link_elf: symbol genkbd_get_fkeystr undefined
kldload: can't load ukbd: No such file or directory
Starting ums0 mousedmoused: cannot open /dev/consolectl: No such file or directory
.
eval: cannot open /dev/ttyv*: No such file or directory
link_elf: symbol genkbd_get_fkeystr undefined
kldload: can't load ukbd: No such file or directory
Starting pflogd:
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Generating host.conf.
Creating and/or trimming log files.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Starting casperd.
Clearing /tmp (X related).
Updating motd:.
Mounting late file systems:.
Generating RSA1 host key.
2048 5e:7f:44:09:4b:14:4c:9c:b1:91:8d:82:80:ab:3a:10 root@wandboard (RSA1)
Generating RSA host key.
2048 b6:16:7b:06:7b:da:2e:32:ea:47:02:08:99:74:5f:21 root@wandboard (RSA)
Generating DSA host key.
1024 44:df:51:f8:84:c7:3e:3f:bf:c9:e2:2d:29:ab:d2:65 root@wandboard (DSA)
Generating ECDSA host key.
256 3b:c5:fd:fa:e8:ce:21:33:fd:12:5c:6b:be:ae:01:10 root@wandboard (ECDSA)
Generating ED25519 host key.
256 a2:de:a2:00:db:23:84:d0:f0:80:e3:40:82:88:15:7f root@wandboard (ED25519)
Performing sanity check on sshd configuration.
Starting sshd.
Starting background file system checks in 60 seconds.
Mon Feb 10 02:29:51 UTC 2014
FreeBSD/arm (wandboard) (ttyu0)
login: root
FreeBSD 11.0-CURRENT (WANDBOARD-QUAD) #0 r261700M: Mon Feb 10 03:28:27 CET 2014
Welcome to FreeBSD!
Before seeking technical support, please use the following resources:
o Security advisories and updated errata information for all releases are
at http://www.FreeBSD.org/releases/ - always consult the ERRATA section
for your release first as it's updated frequently.
o The Handbook and FAQ documents are at http://www.FreeBSD.org/ and,
along with the mailing lists, can be searched by going to
http://www.FreeBSD.org/search/. If the doc package has been installed
(or fetched via pkg install lang-freebsd-doc, where lang is the
2-letter language code, e.g. en), they are also available formatted
in /usr/local/share/doc/freebsd.
If you still have a question or problem, please take the output of
`uname -a', along with any relevant error messages, and email it
as a question to the questions@FreeBSD.org mailing list. If you are
unfamiliar with FreeBSD's directory layout, please refer to the hier(7)
manual page. If you are not familiar with manual pages, type `man man'.
Edit /etc/motd to change this login announcement.
root@wandboard:~ #
--
B.Walter <bernd@bwct.de> http://www.bwct.de
Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner uvm.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20140210041313.GB89777>