Date: Sat, 14 Apr 2001 02:34:30 -0700 From: Forrest <praxis@techpraxis.com> To: FreeBSD Questions <freebsd-questions@freebsd.org> Subject: Re: Please help: -- sis0 : watchdog timeout? Message-ID: <B6FD67B5.756E%praxis@techpraxis.com> In-Reply-To: <001d01c0c32e$1dea9a40$1401a8c0@tedm.placo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On 4/12/01 1:54 AM, "Ted Mittelstaedt" <tedm@toybox.placo.com> is said to have spake: > You don't say what model/type of switch you have which hinders > troubleshooting. It is a Fore Systems ES-2810. However, this behaviour occurs no matter what kind of port I plug the CAT5 cable into. The Switch doesn't hinder troubleshooting (not sure why you said that?) > But, first I'd try using ifconfig to lock both > interfaces into 10BaseT half-duplex and see if the problem goes > away or not. I tried this, using the media options in ifconfig...timeout still occurs when ports are both "active" and "10-base T UTP." I am still looking for help on this; Ted, thanks for your reply. Again, I really appreciate any help anyone can render with this problem. The motherboard has the standard SiS 9000 ethernet chip on it, that is the LAN controller for this on-board LAN port, so it makes sense that it uses the 'sis' driver. When I look online for clues as to how to troubleshoot and fix "watchdog timeout" errors on *BSDs and Linux, it looks like several things can be the cause. I am pretty sure it is a hardware problem with FreeBSD, if someone could help me track it down I would be most grateful... Cheers Forrest H. > > Ted Mittelstaedt tedm@toybox.placo.com > Author of: The FreeBSD Corporate Networker's Guide > Book website: http://www.freebsd-corp-net-guide.com > > >> -----Original Message----- >> From: owner-freebsd-questions@FreeBSD.ORG >> [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of Forrest >> Sent: Thursday, April 12, 2001 1:00 AM >> To: FreeBSD Questions >> Subject: Please help: -- sis0 : watchdog timeout? >> >> >> A Call for help from the excellence of this list: >> >> My FreeBSD box is giving me TROUBLE.... If someone could detect what is >> wrong, and if it is a bug, please tell me how to submit it to the kernel >> people... >> >> I have two ethernet interfaces, a 3Com 905C-TX that is flawless so far, it >> uses the "xl" driver, and an onboard LAN port that was autodetected at >> FreeBSD install and assigned the "sis" driver. >> >> Description of problem: seconds after pluggin' my second ethernet >> interface >> into my switch, (also occurs plugged into a Netgear 10BT hub), no matter >> what cat-5 cable I use(I switched out cables furiously), I get this message >> on the console: >> >> Mymachine /kernel: sis0: watchdog timeout >> Then ping yields: >> Ping: sendto: Host is down >> (repeats until Ctrl-C) >> >> Description of freebsd system: >> FreeBSD 4.3-BETA, running kernel compiled from sources. >> >> Description of hardware: >> Processor: Athlon 600 MHz >> Motherboard: ECS K7ASA w/ AGP slot, two PCI Bus Master UDMA ports, 2 ATAPI >> ea. >> RAM: 256 MB PC 100 SDRAM, 3.3V unbuffered DIMMS. >> ---> Embedded Network interface: >> >> Here is the results of /sbin/dmesg: >> >> Timecounter "i8254" frequency 1193182 Hz >> Timecounter "TSC" frequency 598839452 Hz >> CPU: AMD Athlon(tm) Processor (598.84-MHz 686-class CPU) >> Origin = "AuthenticAMD" Id = 0x621 Stepping = 1 >> >> Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE, >> MCA,CMOV, >> PAT,PSE36,MMX,FXSR> >> AMD Features=0xc0400000<AMIE,DSP,3DNow!> >> real memory = 134217728 (131072K bytes) >> config> di sn0 >> config> di lnc0 >> config> di ie0 >> config> di fe0 >> config> di cs0 >> config> q >> avail memory = 126726144 (123756K bytes) >> Preloaded elf kernel "kernel" at 0xc03d5000. >> Preloaded userconfig_script "/boot/kernel.conf" at 0xc03d509c. >> Pentium Pro MTRR support enabled >> md0: Malloc disk >> npx0: <math processor> on motherboard >> npx0: INT 16 interface >> pcib0: <AMD-751 host to PCI bridge> on motherboard >> pci0: <PCI bus> on pcib0 >> pcib1: <AMD-751 PCI-PCI (AGP) bridge> at device 1.0 on pci0 >> pci1: <PCI bus> on pcib1 >> pci1: <ATI Mach64-GB graphics accelerator> at 5.0 irq 11 >> isab0: <PCI to ISA bridge (vendor=1022 device=7408)> at device 7.0 on pci0 >> isa0: <ISA bus> on isab0 >> atapci0: <AMD 756 ATA66 controller> port 0xf000-0xf00f at device >> 7.1 on pci0 >> ata0: at 0x1f0 irq 14 on atapci0 >> ata1: at 0x170 irq 15 on atapci0 >> chip1: <PCI to Other bridge (vendor=1022 device=740b)> at device >> 7.3 on pci0 >> ohci0: <AMD-756 USB Controller> mem 0xefffe000-0xefffefff irq 9 at device >> 7.4 on pci0 >> usb0: OHCI version 1.0, legacy support >> usb0: SMM does not respond, resetting >> usb0: <AMD-756 USB Controller> on ohci0 >> usb0: USB revision 1.0 >> uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 >> uhub0: 4 ports with 4 removable, self powered >> xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xd400-0xd47f mem >> 0xefffdf80-0xefffdfff irq 5 at device 10.0 on pci0 >> xl0: Ethernet address: 00:01:02:87:04:af >> miibus0: <MII bus> on xl0 >> xlphy0: <3c905C 10/100 internal PHY> on miibus0 >> xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >> pci0: <unknown card> (vendor=0x14f1, dev=0x1036) at 11.0 irq 9 >> ahc0: <Adaptec 2910/15/20/30C SCSI adapter> port 0xdc00-0xdcff mem >> 0xeffff000-0xefffffff irq 10 at device 12.0 on pci0 >> ahc0: Host Adapter Bios disabled. Using default SCSI device parameters >> aic7850: Single Channel A, SCSI Id=7, 3/255 SCBs >> sis0: <SiS 900 10/100BaseTX> port 0xcc00-0xccff mem 0xefffc000-0xefffcfff >> irq 9 >> at device 14.0 on pci0 >> sis0: Ethernet address: 00:d0:09:53:6f:82 >> miibus1: <MII bus> on sis0 >> ukphy0: <Generic IEEE 802.3u media interface> on miibus1 >> ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >> pci0: <unknown card> (vendor=0x13f6, dev=0x0111) at 15.0 irq 10 >> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 >> fdc0: FIFO enabled, 8 bytes threshold >> fd0: <1440-KB 3.5" drive> on fdc0 drive 0 >> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 >> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 >> kbd0 at atkbd0 >> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 >> sc0: <System console> at flags 0x100 on isa0 >> sc0: VGA <16 virtual consoles, flags=0x300> >> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 >> sio0: type 16550A >> sio1 at port 0x2f8-0x2ff irq 3 on isa0 >> sio1: type 16550A >> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 >> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode >> plip0: <PLIP network interface> on ppbus0 >> lpt0: <Printer> on ppbus0 >> lpt0: Interrupt-driven port >> ppi0: <Parallel I/O> on ppbus0 >> IP Filter: v3.4.16 initialized. Default = pass all, Logging = enabled >> ad0: 29314MB <IBM-DTLA-307030> [59560/16/63] at ata0-master UDMA66 >> acd0: CDROM <TOSHIBA CD-ROM XM-6102B> at ata1-master using PIO3 >> Waiting 5 seconds for SCSI devices to settle >> Mounting root from ufs:/dev/ad0s2a >> xl0: promiscuous mode enabled >> sis0: watchdog timeout >> sis0: watchdog timeout >> >> and the result of ifconfig: >> xl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 >> inet <<ipaddress>> netmask 0xffffff00 broadcast 64.221.116.255 >> inet6 fe80::201:2ff:fe87:4af%xl0 prefixlen 64 scopeid 0x1 >> ether 00:01:02:87:04:af >> media: autoselect (10baseT/UTP) status: active >> supported media: autoselect 100baseTX <full-duplex> 100baseTX >> 10baseT/UTP <full-duplex> 10baseT/UTP 100baseTX <hw-loopback> >> sis0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 >> inet 10.0.0.1 netmask 0xffffff00 broadcast 10.0.0.255 >> inet6 fe80::2d0:9ff:fe53:6f82%sis0 prefixlen 64 scopeid 0x2 >> ether 00:d0:09:53:6f:82 >> media: autoselect (100baseTX <full-duplex>) status: active >> supported media: autoselect 100baseTX <full-duplex> 100baseTX >> 10baseT/UTP <full-duplex> 10baseT/UTP none >> lp0: flags=8810<POINTOPOINT,SIMPLEX,MULTICAST> mtu 1500 >> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 >> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 >> inet6 ::1 prefixlen 128 >> inet 127.0.0.1 netmask 0xff000000 >> ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 >> faith0: flags=8000<MULTICAST> mtu 1500 >> gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 >> gif1: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 >> gif2: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 >> gif3: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 >> >> Any other details that help in troubleshooting can be provided on request. >> Thank you, >> Forrest H. >> >> >> To Unsubscribe: send mail to majordomo@FreeBSD.org >> with "unsubscribe freebsd-questions" in the body of the message >> > > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?B6FD67B5.756E%praxis>