From owner-freebsd-mobile Mon Feb 5 9:47:12 2001 Delivered-To: freebsd-mobile@freebsd.org Received: from pine.pinetel.com (pine.pinetel.com [143.227.44.106]) by hub.freebsd.org (Postfix) with ESMTP id 0A1B537B6E4 for ; Mon, 5 Feb 2001 09:46:47 -0800 (PST) Received: from thinkpad (ip56-cu2.pinetel.com [143.227.42.56]) by pine.pinetel.com (8.9.3/8.9.3) with SMTP id JAA23906 for ; Mon, 5 Feb 2001 09:46:44 -0800 (PST) Message-ID: <005301c08f9b$ea0b8420$322ae38f@thinkpad> From: "Hal Weaver" To: Subject: PPP problem: PCMCIA modem on ThinkPad Date: Mon, 5 Feb 2001 09:48:12 -0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 5.00.2615.200 X-MimeOLE: Produced By Microsoft MimeOLE V5.00.2615.200 Sender: owner-freebsd-mobile@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org I'm using a rather new PCMCIA modem on a Thinkpad 760ED. PPP doesn't work with the /etc/pccard.conf I'm using, but tip works ok -- I can login to my IP with it.. /var/log/ppp.log says something about "/dev/cuaa4 doesn't support CD " Below are some relevant portions from /var/log/ppp.log, pccardc, and /etc/pccard.conf. TIA Hal ================ from /var/log/ppp.log ================ . . . Jan 26 15:52:08 pdx ppp[207]: Phase: Using interface: tun0 Jan 26 15:52:08 pdx ppp[207]: Phase: deflink: Created in closed state Jan 26 15:52:08 pdx ppp[207]: tun0: Command: default: set device /dev/cuaa4 Jan 26 15:52:08 pdx ppp[207]: tun0: Command: default: set speed 115200 Jan 26 15:52:08 pdx ppp[207]: tun0: Phase: PPP Started (interactive mode). Jan 26 15:52:15 pdx ppp[207]: tun0: Command: /dev/tty: t Jan 26 15:52:15 pdx ppp[207]: tun0: Phase: bundle: Establish Jan 26 15:52:15 pdx ppp[207]: tun0: Phase: deflink: closed -> opening Jan 26 15:52:17 pdx ppp[207]: tun0: Phase: deflink: Connected! Jan 26 15:52:17 pdx ppp[207]: tun0: Phase: deflink: opening -> carrier Jan 26 15:52:18 pdx ppp[207]: tun0: Phase: deflink: /dev/cuaa4 doesn't support CD Jan 26 15:52:18 pdx ppp[207]: tun0: Phase: deflink: carrier -> ready Jan 26 15:55:11 pdx ppp[207]: tun0: Command: /dev/tty: dial PAPorCHAPpmdemand Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: set phone 8936990 Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: set login Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: set authname hweaverP Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: set authkey ******** Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: set timeout 120 Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0 Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: add default HISADDR Jan 26 15:55:11 pdx ppp[207]: tun0: Command: PAPorCHAPpmdemand: enable dns Jan 26 15:55:11 pdx ppp[207]: tun0: Phase: deflink: ready -> carrier Jan 26 15:55:11 pdx ppp[207]: tun0: Phase: deflink: carrier -> lcp Jan 26 15:55:11 pdx ppp[207]: tun0: LCP: FSM: Using "deflink" as a transport Jan 26 15:55:11 pdx ppp[207]: tun0: LCP: deflink: State change Initial --> Closed Jan 26 15:55:11 pdx ppp[207]: tun0: LCP: deflink: State change Closed --> Stopped . . . ==================== pccardc dumpcis ==================== Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 2 000: 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = reserved, 32 units Tuple #2, code = 0x15 (Version 1 info), length = 40 000: 04 01 41 6d 62 69 63 6f 6d 00 41 6d 62 69 43 6f 010: 6d 20 35 36 4b 20 56 2e 39 30 20 4d 6f 64 65 6d 020: 00 30 32 31 00 41 00 ff Version = 4.1, Manuf = [Ambicom], card vers = [AmbiCom 56K V.90 Modem] Addit. info = [021],[A] Tuple #3, code = 0x20 (Manufacturer ID), length = 4 000: 13 00 00 00 PCMCIA ID = 0x13, OEM ID = 0x0 Tuple #4, code = 0x21 (Functional ID), length = 2 000: 02 00 Serial port/modem Tuple #5, code = 0x22 (Functional EXT), length = 4 000: 00 02 0f 5c Serial interface extension: 16550 UART, Parity - Space,Mark,Odd,Even Data bit - 7bit,8bit, Stop bit - 1bit,2bit Tuple #6, code = 0x22 (Functional EXT), length = 9 000: 05 1f 0f 00 02 00 00 02 00 Data modem interface capabilities: Tuple #7, code = 0x22 (Functional EXT), length = 9 000: 06 1f 0f 00 30 00 00 30 00 Fax/modem interface capabilities: Tuple #8, code = 0x22 (Functional EXT), length = 9 000: 07 1f 0f 00 30 00 00 30 00 Voice interface capabilities: Tuple #9, code = 0x22 (Functional EXT), length = 13 000: 02 0c 00 3f 1c 03 03 0f 07 00 01 b5 ff Data modem services available: Tuple #10, code = 0x22 (Functional EXT), length = 9 000: 13 01 00 1f 00 7a 00 b5 ff Fax1/modem services available: Tuple #11, code = 0x22 (Functional EXT), length = 16 000: 84 06 00 0b 02 07 14 00 08 00 04 00 02 00 00 00 Voice services available: Tuple #12, code = 0x1a (Configuration map), length = 5 000: 01 0d 20 04 77 Reg len = 2, config register addr = 0x420, last config = 0xd Registers: XXX-XXX- Tuple #13, code = 0x1b (Configuration entry), length = 15 000: c5 41 9d 78 65 26 2e 25 e7 5f 23 30 bc 86 28 Config index = 0x5(default) Interface byte = 0x41 (I/O) +RDY/-BSY active Vcc pwr: Continuous supply current: 6 x 10mA Max current average over 1 second: 2 x 100mA Max current average over 10 ms: 2.5 x 100mA Power down supply current: 2 x 10mA RDY/BSY scale Speed = 5.0 x 10 ms, scaled by 10 Card decodes 3 address lines, 8 Bit I/O only IRQ modes: Level IRQs: 2 3 4 5 7 9 10 15 Max twin cards = 0 Misc attr: (Audio-BVD2) (Power down supported) Tuple #14, code = 0x1b (Configuration entry), length = 7 000: 05 08 aa 60 f8 03 07 Config index = 0x5 Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x3f8 block length = 0x8 Tuple #15, code = 0x1b (Configuration entry), length = 7 000: 05 08 aa 60 f8 02 07 Config index = 0x5 Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x2f8 block length = 0x8 Tuple #16, code = 0x1b (Configuration entry), length = 7 000: 05 08 aa 60 e8 03 07 Config index = 0x5 Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x3e8 block length = 0x8 Tuple #17, code = 0x1b (Configuration entry), length = 7 000: 0d 08 aa 60 e8 02 07 Config index = 0xd Card decodes 10 address lines, 8 Bit I/O only I/O address # 1: block start = 0x2e8 block length = 0x8 Tuple #18, code = 0xff (Terminator), length = 0 2 slots found ================== /etc/pccard.conf ================== # This is the pccard.conf that over-rides /etc/defaults/pccard.conf # hw, 04.02.2001 io 0x240-0x360 irq 3 10 11 15 memory 0xd4000 96k # AmbiCom AMB8802 modem (hw, 02.02.2001) card "Ambicom" "AmbiCom 56K V.90 Modem" config 0x5 "sio4" ? reset 10000 logstr "Ambicom V90 Modem" # ------------------------------------------------------------------- # # "Wildcard" entries # # ------------------------------------------------------------------- # GENERIC PCMCIA modem generic serial config auto "sio" ? reset 10000 # for unstable cards logstr "GENERIC PCMCIA modem. . To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message