Date: Thu, 6 Apr 2006 00:10:25 GMT From: "Internet Partners, Inc. Tech Support" <support@ipinc.net> To: freebsd-acpi@FreeBSD.org Subject: Re: kern/88859: ACPI broken on Compaq DL360 Message-ID: <200604060010.k360APiX062329@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/88859; it has been noted by GNATS.
From: "Internet Partners, Inc. Tech Support" <support@ipinc.net>
To: <bug-followup@FreeBSD.org>, "Ted Mittelstaedt" <tedm@ipinc.net>
Cc:
Subject: Re: kern/88859: ACPI broken on Compaq DL360
Date: Wed, 5 Apr 2006 17:03:56 -0700
I can also confirm this is corrected in 6.1-BETA4 and the April 4 CVS,
here is the full verbose output on a first generation Compaq DL360:
SMAP type=01 base=0000000000000000 len=000000000009f800
SMAP type=02 base=000000000009f800 len=0000000000000800
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=01 base=0000000000100000 len=000000007fefc000
SMAP type=03 base=000000007fffc000 len=0000000000004000
SMAP type=02 base=00000000fec00000 len=0000000000010000
SMAP type=02 base=00000000fee00000 len=0000000000010000
SMAP type=02 base=00000000fff80000 len=0000000000080000
SMAP type=01 base=0000000100000000 len=0000000000000000
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #0: Wed Apr 5 01:46:21 UTC 2006
root@freebsd-cvs.ipinc.net:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ee2000.
Preloaded mfs_root "/boot/mfsroot" at 0xc0ee2198.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0ee21dc.
MP Configuration Table version 1.4 found at 0xc00fbeca
Table 'FACP' at 0x7fffc040
Table 'APIC' at 0x7fffc100
MADT: Found table at 0x7fffc100
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
MADT: Found CPU APIC ID 1 ACPI ID 1: disabled
MADT: Found CPU APIC ID 2 ACPI ID 2: disabled
MADT: Found CPU APIC ID 3 ACPI ID 3: enabled
ACPI APIC Table: <COMPAQ 00000083>
Calibrating clock(s) ... i8254 clock: 1193078 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 996850917 Hz
CPU: Intel Pentium III (996.85-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x68a Stepping = 10
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 2147467264 (2047 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000001025000 - 0x000000007dbc3fff, 2092560384 bytes (510879 pages)
avail memory = 2092412928 (1995 MB)
bios32: Found BIOS32 Service Directory header at 0xc00ffee0
bios32: Entry = 0xf0000 (c00f0000) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x94
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 3
MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 8
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
ioapic0: intpin 24 -> PCI IRQ 24 (level, low)
ioapic0: intpin 25 -> PCI IRQ 25 (level, low)
ioapic0: intpin 26 -> PCI IRQ 26 (level, low)
ioapic0: intpin 27 -> PCI IRQ 27 (level, low)
ioapic0: intpin 28 -> PCI IRQ 28 (level, low)
ioapic0: intpin 29 -> PCI IRQ 29 (level, low)
ioapic0: intpin 30 -> PCI IRQ 30 (level, low)
ioapic0: intpin 31 -> PCI IRQ 31 (level, low)
ioapic0: intpin 32 -> PCI IRQ 32 (level, low)
ioapic0: intpin 33 -> PCI IRQ 33 (level, low)
ioapic0: intpin 34 -> PCI IRQ 34 (level, low)
lapic: Routing NMI -> LINT1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0: intpin 9 polarity: low
ioapic0: intpin 9 trigger: level
ioapic0 <Version 1.1> irqs 0-34 on motherboard
cpu0 BSP:
ID: 0x03000000 VER: 0x00040011 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00000000 err: 0x000100f0 pcm: 0x00010000
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
ioapic0: routing intpin 13 (ISA IRQ 13) to vector 48
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ MICRO> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 49
acpi0: [MPSAFE]
acpi0: Power Button (fixed)
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=00091166)
pcibios: BIOS version 2.10
AcpiOsDerivePciId: bus 0 dev 0 func 0
AcpiOsDerivePciId: bus 0 dev 0 func 1
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link4: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 10 11 15
pci_link4: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 5 N 0 5 10 11 15
pci_link4: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link5: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link5: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link5: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link6: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 3 N 0 5 10 11 15
pci_link6: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link6: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link7: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 7 N 0 5 10 11 15
pci_link7: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link7: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link8: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link8: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link8: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link9: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link9: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
pci_link9: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 5 10 11 15
ACPI timer: 0/15 0/7 0/16777092 0/31 0/16776962 0/16776962 0/15 0/15 0/31
0/16776708 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x240-0x243 on acpi0
cpu0: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
found-> vendor=0x1166, dev=0x0009, revid=0x05
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1166, dev=0x0009, revid=0x05
bus=0, slot=0, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0107, statreg=0x0200, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1000, dev=0x0010, revid=0x02
bus=0, slot=1, func=0
class=01-04-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xc0 (5760 ns), mingnt=0x1e (7500 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=3
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 00002000, size 8, enabled
map[14]: type 1, range 32, base f6000000, size 24, enabled
map[18]: type 1, range 32, base f5000000, size 24, enabled
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 19
found-> vendor=0x1002, dev=0x4756, revid=0x7a
bus=0, slot=3, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
powerspec 1 supports D0 D3 current D0
map[10]: type 3, range 32, base f3000000, size 24, enabled
map[14]: type 4, range 32, base 00002400, size 8, enabled
map[18]: type 1, range 32, base f4fff000, size 12, enabled
found-> vendor=0x0e11, dev=0xa0f0, revid=0x00
bus=0, slot=4, func=0
class=08-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0143, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 00001800, size 8, enabled
map[14]: type 1, range 32, base f4ffef00, size 8, enabled
found-> vendor=0x1166, dev=0x0200, revid=0x4f
bus=0, slot=15, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[90]: type 4, range 32, base 00000000, size 4, enabled
found-> vendor=0x1166, dev=0x0211, revid=0x00
bus=0, slot=15, func=1
class=01-01-8a, hdrtype=0x00, mfdev=1
cmdreg=0x0145, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00002800, size 4, enabled
ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem
0xf6000000-0xf6ffffff,0xf5000000-0xf5ffffff irq 19 at device 1.0 on pci0
ida0: Reserved 0x1000000 bytes for rid 0x14 type 3 at 0xf6000000
ioapic0: routing intpin 19 (PCI IRQ 19) to vector 50
ida0: [GIANT-LOCKED]
ida0: drives=1 firm_rev=1.50
idad0: <Compaq Logical Drive> on ida0
idad0: 70001MB (143363040 sectors), blocksize=512
pci0: <display, VGA> at device 3.0 (no driver attached)
pci0: <base peripheral> at device 4.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2800-0x280f at device 15.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x2800
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=60 ostat1=70
ata0: stat0=0x20 err=0x20 lsb=0x20 msb=0x20
ata0: stat1=0x30 err=0x30 lsb=0x30 msb=0x30
ata0: reset tp2 stat0=20 stat1=30 devices=0x0
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 51
ata0: [MPSAFE]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=01
ata1: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: stat1=0x00 err=0x04 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x4<ATAPI_MASTER>
ioapic0: routing intpin 15 (ISA IRQ 15) to vector 52
ata1: [MPSAFE]
pcib1: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib1
pci3: physical bus=3
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=3, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f7fff000, size 12, enabled
map[14]: type 4, range 32, base 00003000, size 6, enabled
map[18]: type 1, range 32, base f7e00000, size 20, enabled
pcib1: matched entry for 3.4.INTA
pcib1: slot 4 INTA hardwired to IRQ 17
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=3, slot=5, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0157, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f7dff000, size 12, enabled
map[14]: type 4, range 32, base 00003040, size 6, enabled
map[18]: type 1, range 32, base f7c00000, size 20, enabled
pcib1: matched entry for 3.5.INTA
pcib1: slot 5 INTA hardwired to IRQ 24
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x3000-0x303f mem
0xf7fff000-0xf7ffffff,0xf7e00000-0xf7efffff irq 17 at device 4.0 on pci3
fxp0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf7fff000
fxp0: using memory space register mapping
fxp0: PCI IDs: 8086 1229 0e11 b134 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
fxp0: Ethernet address: 00:50:8b:e0:4f:03
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 53
fxp0: [MPSAFE]
fxp1: <Intel 82559 Pro/100 Ethernet> port 0x3040-0x307f mem
0xf7dff000-0xf7dfffff,0xf7c00000-0xf7cfffff irq 24 at device 5.0 on pci3
fxp1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xf7dff000
fxp1: using memory space register mapping
fxp1: PCI IDs: 8086 1229 0e11 b134 0008
fxp1: Dynamic Standby mode is disabled
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: bpf attached
fxp1: Ethernet address: 00:50:8b:e0:4e:eb
ioapic0: routing intpin 24 (PCI IRQ 24) to vector 54
fxp1: [MPSAFE]
acpi_tz0: <Thermal Zone> on acpi0
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 90 02 3c
psm: status 00 03 64
psm: status 00 03 64
psm: data 00 00 00
psm: status 10 00 64
psm: status 00 02 64
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 56
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
fdc0: <floppy drive controller> port 0x3f2-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 73
ioapic0: routing intpin 6 (ISA IRQ 6) to vector 57
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A, console
ioapic0: routing intpin 4 (ISA IRQ 4) to vector 58
ex_isa_identify()
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
pnp_identify: Trying Read_Port at 203
pnp_identify: Trying Read_Port at 243
pnp_identify: Trying Read_Port at 283
pnp_identify: Trying Read_Port at 2c3
pnp_identify: Trying Read_Port at 303
pnp_identify: Trying Read_Port at 343
pnp_identify: Trying Read_Port at 383
pnp_identify: Trying Read_Port at 3c3
PNP Identify complete
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: Failed Intstat Reg Test
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
ahc_isa_probe 0: ioport 0xc00 alloc failed
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xcbfff,0xe8000-0xedfff,0xee000-0xeffff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 134115 -> 100000
procfs registered
lapic: Divisor 2, Frequency 66456297 hz
Timecounter "TSC" frequency 996850917 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xc0a4f590
ata1-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
GEOM: new disk idad0
acd0: setting PIO4 on ROSB4 chip
acd0: <Compaq CRN-8241B/2.23> CDROM drive at ata1 as master
acd0: read 4125KB/s (4125KB/s), 128KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: CD-ROM 120mm data disc
ATA PseudoRAID loaded
Trying to mount root from ufs:/dev/md0
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /rescue/init
start_init: trying /stand/sysinstall
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200604060010.k360APiX062329>