From owner-freebsd-questions Sat Mar 10 17:55:28 2001 Delivered-To: freebsd-questions@freebsd.org Received: from edwin.mounet.com (edwin.mounet.com [216.145.76.8]) by hub.freebsd.org (Postfix) with SMTP id 8FA2337B719 for ; Sat, 10 Mar 2001 17:55:19 -0800 (PST) (envelope-from hornback@wireco.net) Received: (qmail 17538 invoked by uid 0); 11 Mar 2001 01:02:07 -0000 Received: from unknown (HELO eagle) (216.145.70.67) by mounet.com with SMTP; 11 Mar 2001 01:02:07 -0000 From: "Andrew C. Hornback" To: "Charles Burns" Cc: Subject: RE: ProLiant 1500 questions... Date: Sat, 10 Mar 2001 20:16:26 -0500 Message-ID: <01f901c0a9c8$e5d5eed0$0f00000a@eagle> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook 8.5, Build 4.71.2173.0 In-Reply-To: Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V5.50.4133.2400 Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Charles, Thanks for the reply, but I think we're in the wrong area. I'm including my dmesg output below. As you can see, the problem with ida0 shows up a good deal before the "Waiting 5 seconds for SCSI devices to settle" in the dmesg entry. I've been told that I should go through the /boot/loader.rc and tell it to unload and reload the kernel (at least once) to prevent this error, since that's what I do manually to make the machine boot... Any ideas? Also, any idea why this machine sees 8 separate PCI busses? It's only got one, as far as I know. One bus with 3 slots, all filled... 8 slots total, 3 PCI / 5 EISA, with none of the EISA slots used. --- Andy ------------------------ dmesg output --- Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.2-RELEASE #0: Fri Mar 9 02:31:20 EST 2001 root@CLASSIFIED:/usr/src/sys/compile/CLASSIFIED Timecounter "i8254" frequency 1193182 Hz CPU: Pentium/P54C (133.61-MHz 586-class CPU) Origin = "GenuineIntel" Id = 0x52c Stepping = 12 Features=0x3bf real memory = 67108864 (65536K bytes) avail memory = 62533632 (61068K bytes) Changing APIC ID for IO APIC #0 from 0 to 2 on chip Programming 16 pins in IOAPIC #0 IOAPIC #0 intpin 2 -> irq 0 FreeBSD/SMP: Multiprocessor motherboard cpu0 (BSP): apic id: 0, version: 0x00030010, at 0xfee00000 cpu1 (AP): apic id: 1, version: 0x00030010, at 0xfee00000 io0 (APIC): apic id: 2, version: 0x000f0011, at 0xfec00000 Preloaded elf kernel "kernel" at 0xc02d1000. Intel Pentium detected, installing workaround for F00F bug md0: Malloc disk npx0: on motherboard npx0: INT 16 interface pcib0: on motherboard pci0: on pcib0 ncr0: port 0x7100-0x71ff mem 0x4300000-0x43000ff irq 10 at device 10.0 on pci0 pcib8: at device 12.0 on pci0 pci1: on pcib8 ida0: port 0x8000-0x80ff mem 0x42000000-0x43ffffff,0x40000000-0x400000ff irq 11 at device 0.0 on pci1 ida0: drives=1 firm_rev=1.24 idad0: on ida0 idad0: 4012MB (8217440 sectors), blocksize=512 tx0: port 0x7200-0x72ff mem 0x4400000-0x4400fff irq 9 at device 13.0 on pci0 miibus0: on tx0 nsphy0: on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto tx0: address 00:e0:29:22:36:ee, type SMC9432TX tx1: port 0x7000-0x70ff mem 0x4200000-0x4200fff irq 5 at device 14.0 on pci0 miibus1: on tx1 nsphy1: on miibus1 nsphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto tx1: address 00:e0:29:21:e8:17, type SMC9432TX isab0: at device 15.0 on pci0 eisa0: on isab0 mainboard0: on eisa0 slot 0 isa0: on isab0 pcib1: on motherboard pci2: on pcib1 pcib2: on motherboard pci3: on pcib2 pcib3: on motherboard pci4: on pcib3 pcib4: on motherboard pci5: on pcib4 pcib5: on motherboard pci6: on pcib5 pcib6: on motherboard pci7: on pcib6 pcib7: on motherboard pci8: on pcib7 fdc0: at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: at port 0x60,0x64 on isa0 atkbd0: flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A stray irq 7 APIC_IO: Testing 8254 interrupt delivery APIC_IO: routing 8254 via IOAPIC #0 intpin 2 Waiting 5 seconds for SCSI devices to settle SMP: AP CPU #1 Launched! sa0 at ncr0 bus 0 target 6 lun 0 sa0: Removable Sequential Access SCSI-2 device sa0: 5.000MB/s transfers (5.000MHz, offset 8) no devsw (majdev=0 bootdev=0xa0300000) Mounting root from ufs:/dev/idad0s2a cd0 at ncr0 bus 0 target 5 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 3.300MB/s transfers cd0: cd present [326227 x 2048 byte records] > -----Original Message----- > From: owner-freebsd-questions@FreeBSD.ORG > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf Of > Charles Burns > Sent: Saturday, March 10, 2001 9:53 AM > To: questions@freebsd.org > Subject: RE: ProLiant 1500 questions... > > > You can increase the time that the kernel waits for SCSI > devices by changing > the line "SCSI_DELAY=" in the kernel configuration file located in > /sys/i386/conf (for x86 machines anyway) > You might try a value of 20000 to 30000 (to and 30 seconds > respectively) > > > >From: "Andrew C. Hornback" > >To: "Wai Chan" > >CC: > >Subject: RE: ProLiant 1500 questions... > >Date: Fri, 9 Mar 2001 21:42:57 -0500 > > > >Wai Chan, > > > > Thanks for the info. I've redone the entire > installation, compiled > >the kernel, got all of the memory and both processors running. I > >sincerely appreciate the help. > > > > But, I have run into another small problem. > Occasionally, on boot, > >it will give me the following: > > > >ida0: port 0x8000-0x80ff mem > >0x42000000-0x43ffffff, 0x40000000-0x400000ff irq 11 at > device 0.0 on > >pci1 > >panic: ida_wait: timeout waiting for completion > >mp_lock = 00000001; cpuid = 0; lapic.id=00000000 > >Uptime: 0s > >Automatic reboot in 15 seconds - press a key on the > console to abort > > > > When we did the previous installation, the friend of > mine that set it > >up put in a larger pause delay earlier in the booting process. He > >told me that he set it up to load and unload the kernel four times, > >which would give the drives a chance to settle so that the > controller > >could be queried properly. > > > > Any ideas on remedying this problem? > > > > Thanks, > > > >--- Andy > > > > > -----Original Message----- > > > From: Wai Chan [mailto:waichan@hpu.edu] > > > Sent: Monday, March 05, 2001 12:51 PM > > > To: Andrew C. Hornback; questions@FreeBSD.ORG > > > Subject: RE: ProLiant 1500 questions... > > > > > > > > > To get smp working: > > > " Boot the system with the Compaq System Configuration > disks. Press > > > CTRL-A at the main menu to get into the advanced mode. Select > > > "Configure hardware" from the menus. Then select "View and > > > edit details". > > > Scroll down to the "Advanced features" section and set > the processor > > > APIC mode to "Full Table". Save the new hardware > configuration to > > > CMOS. Reboot the system. " > > > > > > Make FreeBSD to see all 64MB RAM instead of 16MB RAM: > > > Add this to your kernel > > > options MAXMEM="(64*1024)" > > > > > > -- > > > Wai Chan. > > > > > > -----Original Message----- > > > From: owner-freebsd-questions@FreeBSD.ORG > > > [mailto:owner-freebsd-questions@FreeBSD.ORG]On Behalf > Of Andrew C. > > > Hornback > > > Sent: Monday, March 05, 2001 01:06 AM > > > To: questions@FreeBSD.ORG > > > Subject: ProLiant 1500 questions... > > > > > > > > > Good morning everyone, > > > > > > I'm doing some work on my Compaq ProLiant 1500 box, > > > and was wondering > > > if I could get some help. > > > > > > First of all, it's a dual P133 with 64 Megs of RAM, > > > and I'm having a > > > hellacious time getting both processors to work properly in > > > it. Right > > > now, it runs on a single processor, and flies... but I > know it would > > > be faster with the second one running. I know there is a > > > working SMP > > > kernel on it, because I had it running with both > processors at one > > > time, but I had to shelf the project for a couple of > months and now > > > that I'm back to it, I've forgotten what I did to invoke > > > that kernel. > > > > > > Secondly, I want to limit the number of services that > > > this machine > > > runs, since it is going to be the firewall for my > network, and I was > > > wondering if anyone had a list of all of the services that > > > the default > > > installation of 4.2-Release included. > > > > > > Thanks, > > > > > > --- Andy > > > > > > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > > with "unsubscribe freebsd-questions" in the body of the message > > > > > > > > >To Unsubscribe: send mail to majordomo@FreeBSD.org > >with "unsubscribe freebsd-questions" in the body of the message > > _________________________________________________________________ > Get your FREE download of MSN Explorer at http://explorer.msn.com > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-questions" in the body of the message > To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message