Date: Wed, 18 Apr 2007 11:22:52 +0000 From: "Rick Nekus" <solarux@hotmail.com> To: freebsd-multimedia@freebsd.org Subject: mutlimedia : snd_hda/driver ; No Sound, not loading properly ; Asus P5B Message-ID: <BAY134-F12EEBFD979138EF91E90D1A1500@phx.gbl>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. ------=_NextPart_000_7f1e_4439_2641 MIME-Version: 1.0 Content-Type: text/plain; format="flowed" Hi All, -I was trying to get the below mentioned hardware going and followed instructiuons as per [1]http://people.freebsd.org/~ariff/lowlatency/README If I have left anything out,? or you feel I flubbed somethin up ? or you need any other info just shout. thanks,. Rick. ------------------------- Hardware/chipset : Asus P5B Premium Motherboard/Intel P965/ICH85 Audio/chip : ADI AD1988-B 8/Ch HDA codec -I've (hopefully) attched the verbose booting dmesg. # uname -a FreeBSD 6.2-STABLE-200704 i386 -(theres no X, kde,... yet) # dmesg | grep -i ^pcm pcm0: <Intel 82801H High Definition Audio Controller> mem 0xfebfc000-0xfebfffff irq 22 at device 27.0 on pci0 pcm0: TCSEL: 0x00 -> 0x00 pcm0: DMA Coherency: Uncacheable / vendor=0x8086 pcm0: hdac_mem_alloc: Unable to allocate memory resource # kldstat Id Refs Address Size Name 1 5 0xc0400000 72df00 kernel 2 1 0xc0b2e000 fa18 snd_hda.ko 3 2 0xc0b3e000 22788 sound.ko 4 1 0xc0b61000 5ad74 acpi.ko # cat /dev/sndstat FreeBSD Audio Driver (newpcm) 64bit Installed devices: -thers no /dev/dsp,... ? ---------------------------------------------------------------------- ------------ _________________________________________________________________ Live U's list of the best places [2]to Eat, Study & Party References 1. http://people.freebsd.org/~ariff/lowlatency/README 2. http://g.msn.com/8HMAENCA/2743??PS=47575 ------=_NextPart_000_7f1e_4439_2641 Content-Type: text/plain; name="dmesg.out"; format=flowed Content-Transfer-Encoding: 8bit Content-Disposition: attachment; filename="dmesg.out" Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-STABLE-200704 #0: Sun Apr 1 11:31:16 UTC 2007 root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP Preloaded elf kernel "/boot/kernel/kernel" at 0xc0bdc000. Preloaded elf module "/boot/kernel/snd_hda.ko" at 0xc0bdc188. Preloaded elf module "/boot/kernel/sound.ko" at 0xc0bdc234. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0bdc2e0. MP Configuration Table version 1.4 found at 0xc00f11a0 Table 'FACP' at 0x7ff70200 Table 'APIC' at 0x7ff70390 MADT: Found table at 0x7ff70390 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 130 ACPI ID 3: disabled MADT: Found CPU APIC ID 131 ACPI ID 4: disabled INTR: Adding local APIC 0 as a target ACPI APIC Table: <A_M_I_ OEMAPIC > Calibrating clock(s) ... i8254 clock: 1193248 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2400015564 Hz CPU: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (2400.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0xe3bd<SSE3,RSVD2,MON,DS_CPL,VMX,EST,TM2,<b9>,CX16,<b14>,<b15>> AMD Features=0x20100000<NX,LM> AMD Features2=0x1<LAHF> Cores per package: 2 real memory = 2146893824 (2047 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages) 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages) 0x0000000000c28000 - 0x000000007db21fff, 2096078848 bytes (511738 pages) avail memory = 2095767552 (1998 MB) INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 bios32: Found BIOS32 Service Directory header at 0xc00f0000 bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0x31 pnpbios: Found PnP BIOS data at 0xc00f65a0 pnpbios: Entry = f0000:793a Rev = 1.0 Other BIOS signatures found: APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0 <Version 2.0> irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000 wlan: <802.11 Link Layer> feeder_register: snd_unit=0 snd_maxautovchans=4 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25 ath_rate: version 1.2 <SampleRate bit-rate selection algorithm> random: <entropy source, Software, Yarrow> nfslock: pseudo-device io: <I/O> kbd: new array size 4 kbd1 at kbdmux0 mem: <memory> Pentium Pro MTRR support enabled null: <null device, zero device> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) rr232x: RocketRAID 232x controller driver v1.02 (Apr 1 2007 11:30:51) npx0: INT 16 interface acpi0: <NEC > on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] pci_open(1): mode 1 addr port (0x0cf8) is 0x80030004 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=29a08086) pcibios: BIOS version 3.00 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: Power Button (fixed) acpi0: wakeup code va 0xda38a000 pa 0x9d000 ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 11 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 10 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 7 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 15 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 15 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 255 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 5 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 5 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 3 4 5 6 7 10 11 12 14 15 Validation 0 3 N 0 3 4 5 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 6 7 10 11 12 14 15 cpu0: <ACPI CPU> on acpi0 cpu0: switching to generic Cx mode cpu1: <ACPI CPU> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 found-> vendor=0x8086, dev=0x29a0, revid=0x02 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x29a1, revid=0x02 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 3 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.1.INTA pcib0: slot 1 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x284b, revid=0x02 bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base febfc000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 22 found-> vendor=0x8086, dev=0x283f, revid=0x02 bus=0, slot=28, func=0 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0106, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2847, revid=0x02 bus=0, slot=28, func=4 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTA pcib0: slot 28 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2849, revid=0x02 bus=0, slot=28, func=5 class=06-04-00, hdrtype=0x01, mfdev=1 cmdreg=0x0107, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message pcib0: matched entry for 0.28.INTB pcib0: slot 28 INTB hardwired to IRQ 17 found-> vendor=0x8086, dev=0x2830, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 map[20]: type 4, range 32, base 0000d800, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x2831, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=15 map[20]: type 4, range 32, base 0000d880, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2832, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=7 map[20]: type 4, range 32, base 0000dc00, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x2833, revid=0x02 bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[20]: type 4, range 32, base 0000e000, size 5, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 16 found-> vendor=0x8086, dev=0x2836, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base febfbc00, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x244e, revid=0xf2 bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2810, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2820, revid=0x02 bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=15 powerspec 3 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000ec00, size 3, enabled map[14]: type 4, range 32, base 0000e880, size 2, enabled map[18]: type 4, range 32, base 0000e800, size 3, enabled map[1c]: type 4, range 32, base 0000e480, size 2, enabled map[20]: type 4, range 32, base 0000e400, size 4, enabled map[24]: type 4, range 32, base 0000e080, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x283e, revid=0x02 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=15 map[10]: type 1, range 32, base 00000000, size 8, memory disabled map[20]: type 4, range 32, base 00000400, size 5, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x2825, revid=0x02 bus=0, slot=31, func=5 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=15 powerspec 3 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000d480, size 3, enabled map[14]: type 4, range 32, base 0000d400, size 2, enabled map[18]: type 4, range 32, base 0000d080, size 3, enabled map[1c]: type 4, range 32, base 0000d000, size 2, enabled map[20]: type 4, range 32, base 0000cc00, size 4, enabled map[24]: type 4, range 32, base 0000c880, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x8000-0x8fff pcib1: memory decode 0xfa700000-0xfe7fffff pcib1: prefetched decode 0xbfe00000-0xdfdfffff pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 found-> vendor=0x10de, dev=0x0391, revid=0xa1 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 32, base fd000000, size 24, enabled pcib1: requested memory range 0xfd000000-0xfdffffff: good map[14]: type 3, range 64, base c0000000, size 28, enabled pcib1: requested memory range 0xc0000000-0xcfffffff: good map[1c]: type 1, range 64, base fc000000, size 24, enabled pcib1: requested memory range 0xfc000000-0xfcffffff: good map[24]: type 4, range 32, base 00008c00, size 7, enabled pcib1: requested I/O range 0x8c00-0x8c7f: in range pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 pci1: <display, VGA> at device 0.0 (no driver attached) pcm0: <Intel 82801H High Definition Audio Controller> mem 0xfebfc000-0xfebfffff irq 22 at device 27.0 on pci0 pcm0: TCSEL: 0x00 -> 0x00 pcm0: DMA Coherency: Uncacheable / vendor=0x8086 pcm0: hdac_mem_alloc: Unable to allocate memory resource device_attach: pcm0 attach returned 6 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib2: secondary bus 4 pcib2: subordinate bus 4 pcib2: I/O decode 0x0-0x0 pcib2: memory decode 0xfff00000-0xfffff pcib2: prefetched decode 0xdfe00000-0xdfefffff pci4: <ACPI PCI bus> on pcib2 pci4: physical bus=4 pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pcib3: secondary bus 3 pcib3: subordinate bus 3 pcib3: I/O decode 0xa000-0xafff pcib3: memory decode 0xfe900000-0xfe9fffff pcib3: prefetched decode 0xfff00000-0xfffff pci3: <ACPI PCI bus> on pcib3 pci3: physical bus=3 found-> vendor=0x197b, dev=0x2363, revid=0x02 bus=3, slot=0, func=0 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 0000ac00, size 3, enabled pcib3: requested I/O range 0xac00-0xac07: in range map[14]: type 4, range 32, base 0000a880, size 2, enabled pcib3: requested I/O range 0xa880-0xa883: in range map[18]: type 4, range 32, base 0000a800, size 3, enabled pcib3: requested I/O range 0xa800-0xa807: in range map[1c]: type 4, range 32, base 0000a480, size 2, enabled pcib3: requested I/O range 0xa480-0xa483: in range map[20]: type 4, range 32, base 0000a400, size 4, enabled pcib3: requested I/O range 0xa400-0xa40f: in range map[24]: type 1, range 32, base fe9fe000, size 13, enabled pcib3: requested memory range 0xfe9fe000-0xfe9fffff: good pcib3: matched entry for 3.0.INTA pcib3: slot 0 INTA hardwired to IRQ 16 atapci0: <JMicron JMB363 SATA300 controller> port 0xac00-0xac07,0xa880-0xa883,0xa800-0xa807,0xa480-0xa483,0xa400-0xa40f mem 0xfe9fe000-0xfe9fffff irq 16 at device 0.0 on pci3 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xa400 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 49 atapci0: [MPSAFE] atapci0: Reserved 0x2000 bytes for rid 0x24 type 3 at 0xfe9fe000 atapci0: AHCI Version 01.00 controller with 2 ports detected ata2: <ATA channel 0> on atapci0 ata2: SATA connect status=00000000 ata2: [MPSAFE] ata3: <ATA channel 1> on atapci0 ata3: SATA connect status=00000000 ata3: [MPSAFE] ata4: <ATA channel 2> on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xac00 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xa880 ata4: reset tp1 mask=03 ostat0=10 ostat1=50 ata4: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb ata4: stat1=0x50 err=0x01 lsb=0x00 msb=0x00 ata4: reset tp2 stat0=10 stat1=50 devices=0x6<ATAPI_MASTER,ATA_SLAVE> ata4: [MPSAFE] pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0 pcib4: secondary bus 2 pcib4: subordinate bus 2 pcib4: I/O decode 0x9000-0x9fff pcib4: memory decode 0xfe800000-0xfe8fffff pcib4: prefetched decode 0xfff00000-0xfffff pci2: <ACPI PCI bus> on pcib4 pci2: physical bus=2 found-> vendor=0x11ab, dev=0x4364, revid=0x12 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 3 supports D0 D1 D2 D3 current D0 MSI supports 1 message, 64 bit map[10]: type 1, range 64, base fe8fc000, size 14, enabled pcib4: requested memory range 0xfe8fc000-0xfe8fffff: good map[18]: type 4, range 32, base 00009800, size 8, enabled pcib4: requested I/O range 0x9800-0x98ff: in range pcib4: matched entry for 2.0.INTA pcib4: slot 0 INTA hardwired to IRQ 17 mskc0: <Marvell Yukon 88E8056 Gigabit Ethernet> port 0x9800-0x98ff mem 0xfe8fc000-0xfe8fffff irq 17 at device 0.0 on pci2 mskc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfe8fc000 mskc0: RAM buffer size : 128KB mskc0: Port 0 : Rx Queue 96KB(0x00000000:0x00017fff) mskc0: Port 0 : Tx Queue 32KB(0x00018000:0x0001ffff) msk0: <Marvell Technology Group Ltd. Yukon EC Ultra Id 0xb4 Rev 0x02> on mskc0 msk0: bpf attached msk0: Ethernet address: 00:1a:92:7e:09:63 miibus0: <MII bus> on msk0 e1000phy0: <Marvell 88E1149 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto ioapic0: routing intpin 17 (PCI IRQ 17) to vector 50 mskc0: [MPSAFE] mskc0: [FAST] uhci0: <UHCI (generic) USB controller> port 0xd800-0xd81f irq 23 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 51 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0xd880-0xd89f irq 19 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd880 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 52 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0xdc00-0xdc1f irq 18 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xdc00 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 53 uhci2: [GIANT-LOCKED] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0xe000-0xe01f irq 16 at device 29.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xe000 uhci3: [GIANT-LOCKED] usb3: <UHCI (generic) USB controller> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfebfbc00-0xfebfbfff irq 23 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfebfbc00 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <EHCI (generic) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib5: secondary bus 5 pcib5: subordinate bus 5 pcib5: I/O decode 0xb000-0xbfff pcib5: memory decode 0xfea00000-0xfeafffff pcib5: prefetched decode 0xfff00000-0xfffff pcib5: Subtractively decoded bridge. pci5: <ACPI PCI bus> on pcib5 pci5: physical bus=5 found-> vendor=0x11ab, dev=0x4320, revid=0x14 bus=5, slot=4, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0017, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x17 (5750 ns), maxlat=0x1f (7750 ns) intpin=a, irq=15 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base feafc000, size 14, enabled pcib5: requested memory range 0xfeafc000-0xfeafffff: good map[14]: type 4, range 32, base 0000b800, size 8, enabled pcib5: requested I/O range 0xb800-0xb8ff: in range pcib5: matched entry for 5.4.INTA pcib5: slot 4 INTA hardwired to IRQ 19 skc0: <Marvell Gigabit Ethernet> port 0xb800-0xb8ff mem 0xfeafc000-0xfeafffff irq 19 at device 4.0 on pci5 skc0: Reserved 0x4000 bytes for rid 0x10 type 3 at 0xfeafc000 skc0: interrupt moderation is 100 us skc0: Marvell Yukon Lite Gigabit Ethernet rev. (0x9) skc0: PN: Yukon 88E8001 skc0: EC: Rev. 1.4 skc0: MN: Marvell skc0: SN: AbCdEfG7E0549 skc0: chip ver = 0xb1 skc0: chip rev = 0x09 skc0: SK_EPROM0 = 0x10 skc0: SRAM size = 0x010000 sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: bpf attached sk0: Ethernet address: 00:1a:92:7e:05:49 miibus1: <MII bus> on sk0 e1000phy1: <Marvell 88E1011 Gigabit PHY> on miibus1 e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto skc0: [MPSAFE] isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH8 SATA300 controller> port 0xec00-0xec07,0xe880-0xe883,0xe800-0xe807,0xe480-0xe483,0xe400-0xe40f,0xe080-0xe08f irq 19 at device 31.2 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xe400 atapci1: [MPSAFE] ata5: <ATA channel 0> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xec00 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xe880 ata5: reset tp1 mask=03 ostat0=50 ostat1=00 ata5: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata5: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata5: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER> ata5: [MPSAFE] ata6: <ATA channel 1> on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xe800 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xe480 ata6: reset tp1 mask=03 ostat0=7f ostat1=7f ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat0=0x7f err=0xff lsb=0xff msb=0xff ata6: stat1=0x7f err=0xff lsb=0xff msb=0xff ata6: reset tp2 stat0=ff stat1=ff devices=0x0 ata6: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) atapci2: <Intel ICH8 SATA300 controller> port 0xd480-0xd487,0xd400-0xd403,0xd080-0xd087,0xd000-0xd003,0xcc00-0xcc0f,0xc880-0xc88f irq 19 at device 31.5 on pci0 atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xcc00 atapci2: [MPSAFE] ata7: <ATA channel 0> on atapci2 atapci2: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd480 atapci2: Reserved 0x4 bytes for rid 0x14 type 4 at 0xd400 ata7: reset tp1 mask=03 ostat0=7f ostat1=7f ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat0=0x7f err=0xff lsb=0xff msb=0xff ata7: stat1=0x7f err=0xff lsb=0xff msb=0xff ata7: reset tp2 stat0=ff stat1=ff devices=0x0 ata7: [MPSAFE] ata8: <ATA channel 1> on atapci2 atapci2: Reserved 0x8 bytes for rid 0x18 type 4 at 0xd080 atapci2: Reserved 0x4 bytes for rid 0x1c type 4 at 0xd000 ata8: reset tp1 mask=03 ostat0=7f ostat1=7f ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat0=0x7f err=0xff lsb=0xff msb=0xff ata8: stat1=0x7f err=0xff lsb=0xff msb=0xff ata8: reset tp2 stat0=ff stat1=ff devices=0x0 ata8: [MPSAFE] acpi_button0: <Power Button> on acpi0 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 1 hz: 14318180 opts: leg_route count_size Timecounter "HPET" frequency 14318180 Hz quality 2000 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ioapic0: routing intpin 4 (ISA IRQ 4) to vector 54 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0065 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55 atkbd0: [GIANT-LOCKED] psm0: unable to allocate IRQ unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff ex_isa_identify() atkbdc: atkbdc0 already exists; skipping it sio: sio0 already exists; skipping it pnp_identify: Trying Read_Port at 203 pnp_identify: Trying Read_Port at 243 pnp_identify: Trying Read_Port at 283 pnp_identify: Trying Read_Port at 2c3 pnp_identify: Trying Read_Port at 303 pnp_identify: Trying Read_Port at 343 pnp_identify: Trying Read_Port at 383 pnp_identify: Trying Read_Port at 3c3 PNP Identify complete ahc_isa_probe 8: ioport 0x8c00 alloc failed ahc_isa_probe 10: ioport 0xac00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices pmtimer0 on isa0 orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata0: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 14 (ISA IRQ 14) to vector 56 ata0: [MPSAFE] ata1 at port 0x170-0x177,0x376 irq 15 on isa0 ata1: reset tp1 mask=00 ostat0=ff ostat1=ff ioapic0: routing intpin 15 (ISA IRQ 15) to vector 57 ata1: [MPSAFE] bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fe0: not probed (disabled) ie0: not probed (disabled) lnc0: not probed (disabled) ppc0: parallel port not found. ppc0: <Parallel port> failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 vt0: not probed (disabled) isa_probe_children: probing PnP devices ums0: vendor 0x1267 PS/2+USB Mouse, rev 1.10/23.23, addr 2, iclass 3/1 ums0: 5 buttons and Z dir. Device configuration finished. Reducing kern.maxvnodes 134330 -> 100000 procfs registered lapic: Divisor 2, Frequency 133333733 hz Timecounter "TSC" frequency 2400015564 Hz quality -100 Timecounters tick every 1.000 msec lo0: bpf attached rr232x: no controller detected. ata4-slave: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: <TSSTcorpCD/DVDW SH-S182D/SB04> DVDR drive at ata4 as master acd0: read 8269KB/s (8269KB/s) write 8269KB/s (8269KB/s), 2048KB buffer, UDMA33 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ad9: 152627MB <WDC WD1600JB-00REA0 20.00K20> at ata4-slave UDMA100 ad9: 312581808 sectors [4961616C/1H/63S] 16 sectors/interrupt 1 depth queue ad9: JMicron check1 failed ad9: Adaptec check1 failed ad9: LSI (v3) check1 failed ad9: LSI (v2) check1 failed ad9: FreeBSD check1 failed ata5-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad10: 152627MB <WDC WD1600AAJS-00PSA0 05.06H05> at ata5-master SATA150 ad10: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad9 GEOM: new disk ad10 ad10: Intel check1 failed ad10: Adaptec check1 failed ad10: LSI (v3) check1 failed ad10: LSI (v2) check1 failed ad10: FreeBSD check1 failed ATA PseudoRAID loaded SMP: AP CPU #1 Launched! cpu1 AP: ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010000 ioapic0: Assigning ISA IRQ 1 to local APIC 0 ioapic0: Assigning ISA IRQ 4 to local APIC 1 ioapic0: Assigning ISA IRQ 9 to local APIC 0 ioapic0: Assigning ISA IRQ 14 to local APIC 1 ioapic0: Assigning ISA IRQ 15 to local APIC 0 ioapic0: Assigning PCI IRQ 16 to local APIC 1 ioapic0: Assigning PCI IRQ 17 to local APIC 0 ioapic0: Assigning PCI IRQ 18 to local APIC 1 ioapic0: Assigning PCI IRQ 19 to local APIC 0 ioapic0: Assigning PCI IRQ 23 to local APIC 1 Trying to mount root from ufs:/dev/ad9s1a start_init: trying /sbin/init ------=_NextPart_000_7f1e_4439_2641--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY134-F12EEBFD979138EF91E90D1A1500>