Date: Wed, 06 Jul 2016 19:17:14 +0000 From: bugzilla-noreply@freebsd.org To: freebsd-bugs@FreeBSD.org Subject: [Bug 200993] camcontrol commands results in Periph destroyed on mrsas Message-ID: <bug-200993-8-mTgYYcERw3@https.bugs.freebsd.org/bugzilla/> In-Reply-To: <bug-200993-8@https.bugs.freebsd.org/bugzilla/> References: <bug-200993-8@https.bugs.freebsd.org/bugzilla/>
next in thread | previous in thread | raw e-mail | index | archive | help
https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=3D200993 emz@norma.perm.ru changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |emz@norma.perm.ru --- Comment #12 from emz@norma.perm.ru --- Same stuff here. camcontrol identify doesn't lead to topology change, but smartctl -a definitely does. This is reproducible on a fresh 11.[ and 10.3. Controller: LSI MegaRAID SAS 9341-4i Firmware: Product Name : LSI MegaRAID SAS 9341-4i Serial No : SV62122829 FW Package Build: 24.2.1-0021 Console log: [root@san1:/etc]# zpool status pool: esx state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not supp= ort the features. See zpool-features(7) for details. scan: scrub repaired 0 in 5h40m with 0 errors on Tue Jun 28 03:27:20 2016 config: NAME STATE READ WRITE CKSUM esx ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 da3 ONLINE 0 0 0 da4 ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 da6 ONLINE 0 0 0 da7 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 da9 ONLINE 0 0 0 da10 ONLINE 0 0 0 mirror-3 ONLINE 0 0 0 da12 ONLINE 0 0 0 da13 ONLINE 0 0 0 mirror-4 ONLINE 0 0 0 da5 ONLINE 0 0 0 da8 ONLINE 0 0 0 mirror-5 ONLINE 0 0 0 da11 ONLINE 0 0 0 da14 ONLINE 0 0 0 mirror-6 ONLINE 0 0 0 da15 ONLINE 0 0 0 da16 ONLINE 0 0 0 errors: No known data errors pool: gamestop state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not supp= ort the features. See zpool-features(7) for details. scan: resilvered 729M in 0h0m with 0 errors on Thu Jul 7 04:02:53 2016 config: NAME STATE READ WRITE CKSUM gamestop ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 da0 ONLINE 0 0 0 da17 ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 da18 ONLINE 0 0 0 da19 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 da20 ONLINE 0 0 0 da21 ONLINE 0 0 0 mirror-3 ONLINE 0 0 0 da22 ONLINE 0 0 0 da23 ONLINE 0 0 0 errors: No known data errors pool: zroot state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not supp= ort the features. See zpool-features(7) for details. scan: scrub repaired 0 in 0h1m with 0 errors on Mon Jun 27 21:21:40 2016 config: NAME STATE READ WRITE CKSUM zroot ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 da1p3 ONLINE 0 0 0 da2p3 ONLINE 0 0 0 errors: No known data errors [root@san1:/etc]# smartctl -a /dev/da2 smartctl 6.5 2016-05-07 r4318 [FreeBSD 11.0-ALPHA5 amd64] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Device Model: ST2000NX0253 Serial Number: S460ED5C LU WWN Device Id: 5 000c50 08ca8b9aa Firmware Version: SN02 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 7200 rpm Form Factor: 2.5 inches Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ACS-3 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Thu Jul 7 03:04:27 2016 MSK SMART support is: Available - device has SMART capability. SMART support is: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART Status command failed: Input/output error SMART overall-health self-assessment test result: PASSED Warning: This result is based on an Attribute check. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabl= ed. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has e= ver been run. Total time to complete Offline data collection: ( 609) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 330) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x50bd) SCT Status supported. SCT Error Recovery Control supporte= d. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED=20 WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 081 063 044 Pre-fail Always=20= =20=20=20=20=20 - 134895728 3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Always=20= =20=20=20=20=20 - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always=20= =20=20=20=20=20 - 22 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always=20= =20=20=20=20=20 - 8 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always=20= =20=20=20=20=20 - 19270762 9 Power_On_Hours 0x0032 100 100 000 Old_age Always=20= =20=20=20=20=20 - 624 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always=20= =20=20=20=20=20 - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always=20= =20=20=20=20=20 - 22 184 End-to-End_Error 0x0032 100 100 099 Old_age Always=20= =20=20=20=20=20 - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always=20= =20=20=20=20=20 - 0 188 Command_Timeout 0x0032 100 100 000 Old_age Always=20= =20=20=20=20=20 - 0 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always=20= =20=20=20=20=20 - 0 190 Airflow_Temperature_Cel 0x0022 068 067 040 Old_age Always=20= =20=20=20=20=20 - 32 (Min/Max 20/33) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always=20= =20=20=20=20=20 - 7 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always=20= =20=20=20=20=20 - 0 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always=20= =20=20=20=20=20 - 1280 194 Temperature_Celsius 0x0022 032 040 000 Old_age Always=20= =20=20=20=20=20 - 32 (0 12 0 0 0) 195 Hardware_ECC_Recovered 0x001a 005 004 000 Old_age Always=20= =20=20=20=20=20 - 134895728 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always=20= =20=20=20=20=20 - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline= =20=20=20=20=20 - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always=20= =20=20=20=20=20 - 0 Read SMART Log Directory failed: Input/output error Read SMART Error Log failed: Input/output error Read SMART Self-test Log failed: Input/output error Read SMART Selective Self-test Log failed: Input/output error [root@san1:/etc]# dmesg Copyright (c) 1992-2016 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.0-ALPHA5 #1: Thu Jun 30 22:56:33 MSK 2016 emz@san1:/usr/obj/usr/src/sys/SAN amd64 [...] da2 at mrsas0 bus 1 scbus1 target 7 lun 0 da2: <ATA ST2000NX0253 SN02> s/n S460ED5C detached GEOM_MIRROR: Device swap: provider da2p2 disconnected. [root@san1:/etc]# camcontrol rescan 1:7:0 Re-scan of 1:7:0 was successful [root@san1:/etc]# zpool status pool: esx state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not supp= ort the features. See zpool-features(7) for details. scan: scrub repaired 0 in 5h40m with 0 errors on Tue Jun 28 03:27:20 2016 config: NAME STATE READ WRITE CKSUM esx ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 da3 ONLINE 0 0 0 da4 ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 da6 ONLINE 0 0 0 da7 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 da9 ONLINE 0 0 0 da10 ONLINE 0 0 0 mirror-3 ONLINE 0 0 0 da12 ONLINE 0 0 0 da13 ONLINE 0 0 0 mirror-4 ONLINE 0 0 0 da5 ONLINE 0 0 0 da8 ONLINE 0 0 0 mirror-5 ONLINE 0 0 0 da11 ONLINE 0 0 0 da14 ONLINE 0 0 0 mirror-6 ONLINE 0 0 0 da15 ONLINE 0 0 0 da16 ONLINE 0 0 0 errors: No known data errors pool: gamestop state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not supp= ort the features. See zpool-features(7) for details. scan: resilvered 729M in 0h0m with 0 errors on Thu Jul 7 04:02:53 2016 config: NAME STATE READ WRITE CKSUM gamestop ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 da0 ONLINE 0 0 0 da17 ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 da18 ONLINE 0 0 0 da19 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 da20 ONLINE 0 0 0 da21 ONLINE 0 0 0 mirror-3 ONLINE 0 0 0 da22 ONLINE 0 0 0 da23 ONLINE 0 0 0 errors: No known data errors pool: zroot state: DEGRADED status: One or more devices has been removed by the administrator. Sufficient replicas exist for the pool to continue functioning in a degraded state. action: Online the device using 'zpool online' or replace the device with 'zpool replace'. scan: scrub repaired 0 in 0h1m with 0 errors on Mon Jun 27 21:21:40 2016 config: NAME STATE READ WRITE CKSUM zroot DEGRADED 0 0 0 mirror-0 DEGRADED 0 0 0 da1p3 ONLINE 0 0 0 17040910893353730136 REMOVED 0 0 0 was /dev/da2p3 errors: No known data errors [root@san1:/etc]# zpool online zroot da2p3 [root@san1:/etc]# zpool status pool: esx state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not supp= ort the features. See zpool-features(7) for details. scan: scrub repaired 0 in 5h40m with 0 errors on Tue Jun 28 03:27:20 2016 config: NAME STATE READ WRITE CKSUM esx ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 da3 ONLINE 0 0 0 da4 ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 da6 ONLINE 0 0 0 da7 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 da9 ONLINE 0 0 0 da10 ONLINE 0 0 0 mirror-3 ONLINE 0 0 0 da12 ONLINE 0 0 0 da13 ONLINE 0 0 0 mirror-4 ONLINE 0 0 0 da5 ONLINE 0 0 0 da8 ONLINE 0 0 0 mirror-5 ONLINE 0 0 0 da11 ONLINE 0 0 0 da14 ONLINE 0 0 0 mirror-6 ONLINE 0 0 0 da15 ONLINE 0 0 0 da16 ONLINE 0 0 0 errors: No known data errors pool: gamestop state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not supp= ort the features. See zpool-features(7) for details. scan: resilvered 729M in 0h0m with 0 errors on Thu Jul 7 04:02:53 2016 config: NAME STATE READ WRITE CKSUM gamestop ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 da0 ONLINE 0 0 0 da17 ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 da18 ONLINE 0 0 0 da19 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 da20 ONLINE 0 0 0 da21 ONLINE 0 0 0 mirror-3 ONLINE 0 0 0 da22 ONLINE 0 0 0 da23 ONLINE 0 0 0 errors: No known data errors pool: zroot state: ONLINE status: Some supported features are not enabled on the pool. The pool can still be used, but some features are unavailable. action: Enable all features using 'zpool upgrade'. Once this is done, the pool may no longer be accessible by software that does not supp= ort the features. See zpool-features(7) for details. scan: resilvered 16K in 0h0m with 0 errors on Thu Jul 7 03:05:18 2016 config: NAME STATE READ WRITE CKSUM zroot ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 da1p3 ONLINE 0 0 0 da2p3 ONLINE 0 0 0 errors: No known data errors [root@san1:/etc]# --=20 You are receiving this mail because: You are the assignee for the bug.=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?bug-200993-8-mTgYYcERw3>