Date: Fri, 1 Mar 2002 12:52:49 -0800 (PST) From: Brian Howell <bsdmobile@yahoo.com> To: freebsd-mobile@freebsd.org Subject: booting problems and watchdog timeout Message-ID: <20020301205249.37351.qmail@web21301.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
Hi there.I just joined this list as i was having problems setting up my orinoco on a desktop(v 4.4 stable) with a pci adapter. I cant get my box to boot without freezing using pci interrupt routing.The only way it boots is if i add: hw.pcic.ignore_function_1="1" and hw.pcic.intr_path='1' This takes it into polling mode.But i cant see any other way i can get this thing to boot. On top of this problem i get watchdog timeouts when i try to use ifconfig with it.I have tried changing the port address too,but no luck.still watchdog timeouts.but i get these timeouts only when i use ifconfig. Am attaching my dmesg below.if anybody needs anything more i would be more than happy to provide it. Cheers, Brian CPU: Pentium II/Pentium II Xeon/Celeron (266.62-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x633 Stepping = 3 Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX> real memory = 67108864 (65536K bytes) avail memory = 60432384 (59016K bytes) Preloaded elf kernel "kernel" at 0xc04cd000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 7 entries at 0xc00fdf50 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443LX (440 LX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82443LX (440 LX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfcd0-0xfcdf at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfce0-0xfcff irq 9 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: <Intel 82371AB Power management controller> port 0x7000-0x700f at device 7.3 on pci0 pci0: <ATI Mach64-GU graphics accelerator> at 13.0 tx0: <SMC EtherPower II 10/100> port 0xf400-0xf4ff mem 0xfedfe000-0xfedfefff irq 11 at device 14.0 on pci0 miibus0: <MII bus> on tx0 qsphy0: <QS6612 10/100 media interface> on miibus0 qsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto tx0: address 00:e0:29:11:6d:85, type SMC9432TX pcm0: <AudioPCI ES1371-A> port 0xfc40-0xfc7f irq 10 at device 15.0 on pci0 pcic0: <TI PCI-1410 PCI-CardBus Bridge> at device 16.0 on pci0 pcic0: PCI Memory allocated: 0x44000000 pcic0: Polling mode pcic0: TI12XX PCI Config Reg: [pwr save][CSC parallel isa irq] pccard0: <PC Card bus (classic)> on pcic0 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe8000-0xeffff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 4112MB <WDC AC24300L> [8912/15/63] at ata0-master UDMA33 acd0: CDROM <TOSHIBA CD-ROM XM-6102B> at ata1-master using PIO3 Mounting root from ufs:/dev/ad0s2a pccard: card inserted, slot 0 wi0: <WaveLAN/IEEE 802.11> at port 0x100-0x13f irq 5 slot 0 on pccard0 wi0: Ethernet address: 00:02:2d:3c:66:c2 wi0: watchdog timeout <--- i get on using ifconfig __________________________________________________ Do You Yahoo!? Yahoo! Greetings - Send FREE e-cards for every occasion! http://greetings.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020301205249.37351.qmail>