From owner-freebsd-isp Fri Jun 13 17:24:48 1997 Return-Path: Received: (from root@localhost) by hub.freebsd.org (8.8.5/8.8.5) id RAA29204 for isp-outgoing; Fri, 13 Jun 1997 17:24:48 -0700 (PDT) Received: from super-g.inch.com (super-g.com [204.178.32.161]) by hub.freebsd.org (8.8.5/8.8.5) with ESMTP id RAA29199 for ; Fri, 13 Jun 1997 17:24:41 -0700 (PDT) Received: from localhost (spork@localhost) by super-g.inch.com (8.8.5/8.6.9) with SMTP id UAA13574; Fri, 13 Jun 1997 20:32:04 GMT Date: Fri, 13 Jun 1997 20:32:04 +0000 (GMT) From: spork X-Sender: spork@super-g.inch.com To: Steven Ames cc: freebsd-isp@freebsd.org Subject: Re: USR-TC/Radius question In-Reply-To: <199706132011.PAA05513@news.cioe.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-isp@freebsd.org X-Loop: FreeBSD.org Precedence: bulk whoops, looking at the manual the PPP message is just an ascii string showing both IP addresses... Sorry about that... Looking through the NetServer manual however, I see a radius attribute called "Reply-Message". They don't elaborate on it, but you could try setting up your default entry in the Radius "users" file with this line added: Reply-Message = cisco> That may be it... They don't elaborate on what exactly the Reply-Message is used for, but I would guess it might do what you want... C On Fri, 13 Jun 1997, Steven Ames wrote: > > Can't seem to find that anywhere. *sigh* And the USR people insist its > a radius issue still. > > -Steve > > > There is a setting on the netserver that lets you set a "ppp connect > > message" or some similar terminoligy... If you were to put "cisco>" > > there, that may solve the problem. I assume the USR would ignore the > > response and start spewing forth PPP bits... > > > > Charles > > > > On Thu, 12 Jun 1997, Steve Ames wrote: > > > > > > > > This is, quite obviously, not the most correct place to post this question, > > > but I didn't know really where to start. > > > > > > I've got a lot of Cisco equipment that I've been using as access servers > > > (Cisco 2511 and 5200 series). > > > > > > I recently purchases a USR Total Control with Netserver Card and am trying > > > to get it working. Actually it does work I just need to tweak it a bit and > > > that's what I'm having a problem with. This might actually be more of a > > > radius question than a USR question. > > > > > > Here's the situation: > > > > > > Under Cisco, the dialin script looked something akin to: > > > > > > Username: bob > > > Password: > > > cisco> ppp default > > > [DROP TO PPP MODE] > > > > > > Under USR it looks like this: > > > > > > Username: bob > > > Password: > > > [DROP to PPP MODE] > > > > > > I need the USR box to kick out that extra prompt, the 'cisco>' prompt. All > > > of my scripts (as well as a lof of people who will dial into this box) > > > depend on it being there. It can trash my response, in fact I expect/want > > > it to. > > > > > > The USR support people are all saying its just a radius modification. I've > > > read over all the radius stuff I can find (fun stuff by the way) and the > > > nearest I can find is a Reply-Message atribute. Unfortunately that can only > > > be used when sending a reject or a challenge... or so i'm led to believe. > > > > > > So, I am well and truly stuck. Please help me! > > > > > > -Steve > > > > > > > >