Date: Fri, 16 Mar 2007 18:52:39 +0000 From: Charlie & Root <rostyslav@optonline.net> To: questions@freebsd.org Subject: HPLIP and FreeBsd Message-ID: <200703161852.39195.rostyslav@optonline.net>
next in thread | raw e-mail | index | archive | help
--Boundary_(ID_W+U6qfRGa1rnO+01LHRetA) Content-type: text/plain; charset=iso-8859-1 Content-transfer-encoding: quoted-printable Content-disposition: inline I have HP Office Jet 4315 All -in- one(USB). everething installed. Just one problem - Print Manager(HPlip) does not see= =20 this usb-printer. I'll appreciate a little help. Thankyou. here is some logs: 1) ool-18bb9d56# /usr/local/share/hplip/check HP Linux Imaging and Printing System (ver. 1.7.1) Dependency/Version Check Utility ver. 5.2 Copyright (c) 2003-6 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. =2D-------------- | SYSTEM INFO | =2D-------------- Basic system information: =46reeBSD ool-18bb9d56.dyn.optonline.net 6.2-RELEASE FreeBSD 6.2-RELEASE #0= : Fri=20 Jan 12 11:05:30 UTC 2007 =A0 =A0=20 root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP =A0i386 Detected distro (/etc/issue): unknown 0.0 Detected distro (lsb_release): error: lsb_release not found. Currently installed HPLIP version... HPLIP 1.7.1 currently installed in '/usr/local/share/hplip'. Current contents of '/etc/hp/hplip.conf' file: # hplip.conf [hpiod] # port=3D0 (dynamic IP port) port=3D2208 [hpssd] # port=3D0 (dynamic IP port) port=3D2207 [dirs] run=3D/var/run [hplip] version=3D1.7.1 jdprobe=3D0 [dirs] home=3D/usr/local/share/hplip run=3D/var/run ppd=3D/usr/local/share/ppd/HP doc=3D/usr/local/share/doc/hplip-1.7.1 # Following values are determined at configure time and cannot be changed. [configure] network-build=3D1 pp-build=3D0 gui-build=3D1 scanner-build=3D1 fax-build=3D1 installinitd=3D chkconfig=3D internal-tag=3D1.7.1.5 home=3D/usr/local/share/hplip ppd=3D/usr/local/share/ppd HPLIP running? Yes, HPLIP is running (OK). HPOJ running? error: Yes, HPOJ is running. HPLIP is not compatible with HPOJ. To run HPLI= P,=20 please remove HPOJ. Checking Python version... OK, version 2.4.3 installed Checking PyQt version... OK, version 3.17 installed. Checking SIP version... OK, Version 4.5.2 installed =2D--------------- | DEPENDENCIES | =2D--------------- Checking for dependency libcrypto - OpenSSL cryptographic library... error: Not found! error: This is a REQUIRED dependency. Please make sure that this dependency= is=20 installed before installing or running HPLIP. Checking for dependency gcc - GNU Project C and C++ Compiler... OK, found. Checking for dependency SANE - Scanning library... error: Not found! error: This is a REQUIRED dependency. Please make sure that this dependency= is=20 installed before installing or running HPLIP. Checking for dependency GhostScript - PostScript and PDF language interpret= er=20 and previewer... OK, found. Checking for dependency libjpeg - JPEG library... error: Not found! error: This is a REQUIRED dependency. Please make sure that this dependency= is=20 installed before installing or running HPLIP. Checking for dependency libpthread - POSIX threads library... error: Not found! error: This is a REQUIRED dependency. Please make sure that this dependency= is=20 installed before installing or running HPLIP. Checking for dependency make - GNU make utility to maintain groups of=20 programs... error: Not found! error: This is a REQUIRED dependency. Please make sure that this dependency= is=20 installed before installing or running HPLIP. Checking for dependency python-devel - Python development files... error: Not found! error: This is a REQUIRED dependency. Please make sure that this dependency= is=20 installed before installing or running HPLIP. Checking for dependency Reportlab - PDF library for Python... error: Not found! This is an OPTIONAL dependency. Some HPLIP functionality may not function=20 properly. Checking for dependency PyQt - Qt interface for Python... OK, found. Checking for dependency cups-devel- Common Unix Printing System development= =20 files... error: Not found! error: This is a REQUIRED dependency. Please make sure that this dependency= is=20 installed before installing or running HPLIP. Checking for dependency ppdev - Parallel port support kernel module.... error: Not found! This is an OPTIONAL dependency. Some HPLIP functionality may not function=20 properly. Checking for dependency libusb - USB library... error: Not found! error: This is a REQUIRED dependency. Please make sure that this dependency= is=20 installed before installing or running HPLIP. Checking for dependency scanimage - Shell scanning program... OK, found. Checking for dependency libnetsnmp-devel - SNMP networking library developm= ent=20 files... error: Not found! error: This is a REQUIRED dependency. Please make sure that this dependency= is=20 installed before installing or running HPLIP. Checking for dependency Python 2.2 or greater - Python programming language= =2E.. OK, found. Checking for dependency LSB - Linux Standard Base support... error: Not found! error: This is a REQUIRED dependency. Please make sure that this dependency= is=20 installed before installing or running HPLIP. Checking for dependency xsane - Graphical scanner frontend for SANE... OK, found. Checking for dependency cups - Common Unix Printing System... OK, found. Checking for dependency Python 2.3 or greater - Required for fax=20 functionality... OK, found. =2D--------------------- | INSTALLED PRINTERS | =2D--------------------- hp =2D- Device URI: usb:/dev/unlpt0 Installed in HPLIP? No =2D--------------------- | SANE CONFIGURATION | =2D--------------------- 'hpaio' in /etc/sane.d/dll.conf'... Traceback (most recent call last): =A0 File "/usr/local/share/hplip/check", line 369, in ? =A0 =A0 f =3D file('/etc/sane.d/dll.conf', 'r') IOError: [Errno 2] No such file or directory: '/etc/sane.d/dll.conf' =A0 2) ool-18bb9d56# /usr/local/share/hplip/info HP Linux Imaging and Printing System (ver. 1.7.1) Device Information Utility ver. 3.4 Copyright (c) 2003-6 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. warning: Inrecognized URI: usb:/dev/unlpt0 error: No devices found. error: Error occured during interactive mode. Exiting. 3) ool-18bb9d56# /usr/local/share/hplip/probe HP Linux Imaging and Printing System (ver. 1.7.1) Printer Discovery Utility ver. 3.1 Copyright (c) 2003-6 Hewlett-Packard Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. warning: No devices found on the 'usb' bus. If this isn't the result you ar= e=20 expecting, warning: check to make sure your devices are properly connected. 4) ool-18bb9d56# tail -f /var/log/messages Mar 16 18:39:21 ool-18bb9d56 python: hp-info[2638]: warning: Inrecognized U= RI:=20 usb:/dev/unlpt0 Mar 16 18:39:21 ool-18bb9d56 python: hp-info[2638] error: No devices found. Mar 16 18:39:21 ool-18bb9d56 python: hp-info[2638] error: Error occured dur= ing=20 interactive mode. Exiting. Mar 16 18:40:23 ool-18bb9d56 python: hp-probe[2705]: warning: No devices fo= und=20 on the 'usb' bus. If this isn't the result you are expecting, Mar 16 18:40:23 ool-18bb9d56 python: hp-probe[2705]: warning: check to make= =20 sure your devices are properly connected. Mar 16 18:40:36 ool-18bb9d56 kernel: ulpt0: HP Officejet 4300 series, rev=20 2.00/1.00, addr 2, iclass 255/204 Mar 16 18:40:36 ool-18bb9d56 kernel: ulpt0: using bi-directional mode Mar 16 18:40:51 ool-18bb9d56 python: hp-probe[2734]: warning: No devices fo= und=20 on the 'usb' bus. If this isn't the result you are expecting, Mar 16 18:40:51 ool-18bb9d56 python: hp-probe[2734]: warning: check to make= =20 sure your devices are properly connected. Mar 16 18:42:45 ool-18bb9d56 python: hp-setup[2872] error: No devices=20 found.Please make sure your printer is properly connected and powered-on. 5) ool-18bb9d56# dmesg Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 =A0 =A0 =A0 =A0 The Regents of the University of California. All rights res= erved. =46reeBSD is a registered trademark of The FreeBSD Foundation. =46reeBSD 6.2-RELEASE #0: Fri Jan 12 11:05:30 UTC 2007 =A0 =A0 root@dessler.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3200.14-MHz 686-class CPU) =A0 Origin =3D "GenuineIntel" =A0Id =3D 0xf49 =A0Stepping =3D 9 =A0=20 =46eatures=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> =A0 Features2=3D0x641d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,CX16,<b14>> =A0 AMD Features=3D0x20100000<NX,LM> =A0 AMD Features2=3D0x1<LAHF> =A0 Logical CPUs per core: 2 real memory =A0=3D 535121920 (510 MB) avail memory =3D 505544704 (482 MB) ACPI APIC Table: <INTEL =A0D11020M > =46reeBSD/SMP: Multiprocessor System Detected: 2 CPUs =A0cpu0 (BSP): APIC ID: =A00 =A0cpu1 (AP): APIC ID: =A01 ioapic0: Changing APIC ID to 4 ioapic0 <Version 2.1> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <INTEL D11020M> on motherboard acpi0: Overriding SCI Interrupt from IRQ 9 to IRQ 21 acpi0: Power Button (fixed) acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR unknown: I/O range not supported Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_throttle0: <ACPI CPU Throttling> on cpu0 cpu1: <ACPI CPU> on acpi0 acpi_throttle1: <ACPI CPU Throttling> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff iomem 0xfff00000-0xffffffff = on=20 acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0 pci1: <ACPI PCI bus> on pcib1 nvidia0: <GeForce 7600 GS> port 0x2000-0x207f mem=20 0x31000000-0x31ffffff,0x20000000-0x2fffffff,0x30000000-0x30ffffff irq 18 at= =20 device 0.0 on pci1 nvidia0: [GIANT-LOCKED] atapci0: <ATI IXP400 SATA150 controller> port=20 0x3068-0x306f,0x3084-0x3087,0x3060-0x3067,0x3080-0x3083,0x3030-0x303f mem=20 0x32107600-0x321077ff irq 23 at device 17.0 on pci0 ata2: <ATA channel 0> on atapci0 ata3: <ATA channel 1> on atapci0 atapci1: <ATI IXP400 SATA150 controller> port=20 0x3058-0x305f,0x307c-0x307f,0x3050-0x3057,0x3078-0x307b,0x3020-0x302f mem=20 0x32107400-0x321075ff irq 22 at device 18.0 on pci0 ata4: <ATA channel 0> on atapci1 ata5: <ATA channel 1> on atapci1 ohci0: <ATI SB400 USB Controller> irq 19 at device 19.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <ATI SB400 USB Controller> on ohci0 usb0: USB revision 1.0 uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered ohci1: <ATI SB400 USB Controller> irq 19 at device 19.1 on pci0 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: <ATI SB400 USB Controller> on ohci1 usb1: USB revision 1.0 uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 4 ports with 4 removable, self powered ehci0: <ATI SB400 USB 2.0 controller> irq 19 at device 19.2 on pci0 ehci0: [GIANT-LOCKED] usb2: waiting for BIOS to give up control usb2: timed out waiting for BIOS usb2: EHCI version 1.0 usb2: companion controllers, 4 ports each: usb0 usb1 usb2: <ATI SB400 USB 2.0 controller> on ehci0 usb2: USB revision 2.0 uhub2: ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 8 ports with 8 removable, self powered pci0: <serial bus, SMBus> at device 20.0 (no driver attached) atapci2: <ATI IXP400 UDMA133 controller> port=20 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x3000-0x300f at device 20.1 on pci0 ata0: <ATA channel 0> on atapci2 ata1: <ATA channel 1> on atapci2 pcm0: <ATI SB450 High Definition Audio Controller> mem 0x32100000-0x32103ff= f=20 irq 16 at device 20.2 on pci0 isab0: <PCI-ISA bridge> at device 20.3 on pci0 isa0: <ISA bus> on isab0 pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0 pci2: <ACPI PCI bus> on pcib2 rl0: <RealTek 8139 10/100BaseTX> port 0x1000-0x10ff mem 0x32000000-0x320000= ff=20 irq 21 at device 2.0 on pci2 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: =A010baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:16:76:6d:0a:5e atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 4 = on=20 acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acp= i0 sio0: type 16550A pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=3D0x300> sio1: configured irq 3 not in bitmap of probed irqs 0x1 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: vendor 0x15ca USB Optical Mouse, rev 2.00/5.12, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. Timecounters tick every 1.000 msec acd0: CDRW <52X24X52 CD-RW 1.06 20030129/1.06> at ata1-master UDMA33 ad3: 286168MB <Seagate ST3300620A 3.AAC> at ata1-slave UDMA100 ad8: 305245MB <Seagate ST3320620AS 3.AAE> at ata4-master SATA150 pcm0: <HDA Codec: Realtek ALC883> pcm0: <HDA Driver Revision: 20070105_0038> SMP: AP CPU #1 Launched! Trying to mount root from ufs:/dev/ad8s1a cd0 at ata1 bus 0 target 0 lun 0 cd0: < 52X24X52 CD-RW 1.06> Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: cd present [90367 x 2048 byte records] ulpt0: HP Officejet 4300 series, rev 2.00/1.00, addr 2, iclass 255/204 ulpt0: using bi-directional mode One more thing, printer by itself works in KDE, but not with HPLIP --Boundary_(ID_W+U6qfRGa1rnO+01LHRetA)--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200703161852.39195.rostyslav>