Date: Sun, 1 Oct 2017 22:12:07 +0000 From: Rick Macklem <rmacklem@uoguelph.ca> To: "freebsd-current@freebsd.org" <freebsd-current@freebsd.org> Subject: panic in AcpiOsGetTimer during boot. Message-ID: <YQXPR0101MB09978854DC5374CE92B9315BDD7C0@YQXPR0101MB0997.CANPRD01.PROD.OUTLOOK.COM>
next in thread | raw e-mail | index | archive | help
Hi, I get the KASSERT panic in AcpiOsGetTimer() while booting a recent (2 day o= ld) kernel. When I delete the KASSERT(), the kernel boots and seems to work ok. (This is the AcpiOsGetTimer() in sys/dev/acpica/Osd/OsdSchedule.c. There al= so seems to be one of these functions under contrib.) Here is my dmesg after boot, if it helps indicate why this is called when "= cold" is still set. (I've marked where the dmesg ends when it Panics if the KASSE= RT() is enabled.) dmesg after booting: Copyright (c) 1992-2017 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-CURRENT #1: Sun Oct 1 09:48:42 EDT 2017 root@nfsv4-newerlap.rick.home:/sub1/sys.headsep30/amd64/compile/GENERIC= amd64 FreeBSD clang version 3.7.0 (tags/RELEASE_370/final 246257) 20150906 WARNING: WITNESS option enabled, expect reduced performance. VT(vga): resolution 640x480 CPU: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz (2294.84-MHz K8-class CPU) Origin=3D"GenuineIntel" Id=3D0x306a9 Family=3D0x6 Model=3D0x3a Steppi= ng=3D9 Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG= E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=3D0x7fbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3= ,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE= ,AVX,F16C,RDRAND> AMD Features=3D0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=3D0x1<LAHF> Structured Extended Features=3D0x281<FSGSBASE,SMEP,ERMS> XSAVE Features=3D0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory =3D 17179869184 (16384 MB) avail memory =3D 16518905856 (15753 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <_ASUS_ Notebook> FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads random: unblocking device. arc4random: no preloaded entropy cache ioapic0 <Version 2.0> irqs 0-23 on motherboard SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #7 Launched! SMP: AP CPU #6 Launched! SMP: AP CPU #4 Launched! **** dmesg ends here when in KASSERT() panics. SMP: AP CPU #5 Launched! SMP: AP CPU #2 Launched! Timecounter "TSC-low" frequency 1147419696 Hz quality 1000 random: entropy device external interface netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff80f779d0, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" kbd1 at kbdmux0 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard acpi0: <_ASUS_ Notebook> on motherboard acpi_ec0: <Embedded Controller: GPE 0x19, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 cpu4: <ACPI CPU> on acpi0 cpu5: <ACPI CPU> on acpi0 cpu6: <ACPI CPU> on acpi0 cpu7: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xf6000000-0xf6fff= fff,0xf0000000-0xf3ffffff,0xf4000000-0xf5ffffff irq 16 at device 0.0 on pci= 1 vgapci0: Boot video device hdac0: <NVIDIA GF110 HDA Controller> mem 0xf7080000-0xf7083fff irq 17 at de= vice 0.1 on pci1 xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7300000-0xf730ffff i= rq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA usbus0: waiting for BIOS to give up control xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7318000-0xf73183ff i= rq 16 at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 hdac1: <Intel Panther Point HDA Controller> mem 0xf7310000-0xf7313fff irq 2= 2 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib3 iwn0: <Intel Centrino Advanced-N 6200> mem 0xf7200000-0xf7201fff irq 17 at = device 0.0 on pci3 arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache arc4random: no preloaded entropy cache pcib4: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci4: <ACPI PCI bus> on pcib4 alc0: <Atheros AR8151 v2.0 PCIe Gigabit Ethernet> port 0xd000-0xd07f mem 0x= f7100000-0xf713ffff irq 19 at device 0.0 on pci4 alc0: 11776 Tx FIFO, 12032 Rx FIFO alc0: Using 1 MSI message(s). miibus0: <MII bus> on alc0 atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0 atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FD= X, 1000baseT-FDX-master, auto, auto-flow alc0: Using defaults for TSO: 65518/35/2048 alc0: Ethernet address: 10:bf:48:23:08:56 ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7317000-0xf73173ff i= rq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 usbus2: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Panther Point AHCI SATA controller> port 0xf070-0xf077,0xf060= -0xf063,0xf050-0xf057,0xf040-0xf043,0xf020-0xf03f mem 0xf7316000-0xf73167ff= irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich2: <AHCI channel> at channel 2 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_acad0: <AC Adapter> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 est0: <Enhanced SpeedStep Frequency Control> on cpu0=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?YQXPR0101MB09978854DC5374CE92B9315BDD7C0>