From owner-freebsd-scsi Sat Apr 27 16:17:51 1996 Return-Path: owner-freebsd-scsi Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id QAA14862 for freebsd-scsi-outgoing; Sat, 27 Apr 1996 16:17:51 -0700 (PDT) Received: from uuneo.neosoft.com (root@uuneo.neosoft.com [206.109.1.3]) by freefall.freebsd.org (8.7.3/8.7.3) with ESMTP id QAA14856 for ; Sat, 27 Apr 1996 16:17:48 -0700 (PDT) Received: (from taronga@localhost) by uuneo.neosoft.com (8.7.5/8.7.4) with UUCP id SAA23375 for scsi@freebsd.org; Sat, 27 Apr 1996 18:02:54 -0500 (CDT) Received: (from peter@localhost) by bonkers.taronga.com (8.6.11/8.6.9) id RAA01804 for scsi@freebsd.org; Sat, 27 Apr 1996 17:49:59 -0500 From: peter@taronga.com (Peter da Silva) Message-Id: <199604272249.RAA01804@bonkers.taronga.com> Subject: Adaptec 1542, Adaptec 1742, Bustek 747, Archive Viper, Help? To: scsi@freebsd.org Date: Sat, 27 Apr 1996 17:49:58 -0500 (CDT) X-Mailer: ELM [version 2.4 PL24] Content-Type: text Sender: owner-freebsd-scsi@freebsd.org X-Loop: FreeBSD.org Precedence: bulk OK, I've got on hand: 1 (one) Bustek 747. 1 (one) Adaptec 1540B. 1 (one) Adaptec 1742A. 1 (one) Archive Viper. I don't have a SCSI cable with enough connectors to put the Viper on the 747. When I have it on the 1540B, I get fatal write errors halfway through the tape. About halfway. It's not predictable. (already posted about this) I've tried multiple tapes. Same results, but in different places. The tapes can't *all* be bad. I got the drive and tapes from CSC. When I try to install the 1742 as a second controller, it interferes with the 747. No matter what EISA config I set, if the 1742 is enabled the Bustek BIOS tried to drive it as a Bustek. I don't understand EISA config that well, so I could simply be thick. Help? I'll be happy to supply any and all details. FreeBSD 2.0.5-RELEASE #0: Sat Apr 27 10:26:49 CDT 1996 peter@bonkers.taronga.com:/usr/src/sys/compile/BONK CPU: i486 DX2 (486-class CPU) Origin = "GenuineIntel" Id = 0x435 Stepping=5 Features=0x3 real memory = 16384000 (4000 pages) avail memory = 14917632 (3642 pages) Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16450 sio2 at 0x3e8-0x3ef irq 5 on isa sio2: type 16550A sio3 at 0x2e8-0x2ef irq 9 on isa sio3: type 16550A sio4 at 0x2a0-0x2a7 flags 0x705 on isa sio4: type 16550A (multiport) sio5 at 0x2a8-0x2af flags 0x705 on isa sio5: type 16550A (multiport) sio6 at 0x2b0-0x2b7 flags 0x705 on isa sio6: type 16550A (multiport) sio7 at 0x2b8-0x2bf irq 10 flags 0x705 on isa sio7: type 16550A (multiport master) lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in fd1: 1.2MB 5.25in bt0: Bt747 / 0-PCI/EISA/VLB(32bit) bus bt0: reading board settings, busmastering, int=12 bt0: version 3.37, fast sync, parity, 32 mbxs, 32 ccbs bt0: targ 0 sync rate= 5.00MB/s(200ns), offset=15 bt0: targ 1 sync rate= 5.00MB/s(200ns), offset=15 bt0: targ 6 sync rate= 4.54MB/s(220ns), offset=15 bt0: Enabling Round robin scheme bt0 at 0x330 irq 12 on isa bt0 waiting for scsi devices to settle (bt0:0:0): "FUJITSU M2684S-512 2039" type 0 fixed SCSI 2 sd0(bt0:0:0): Direct-Access 507MB (1039329 512 byte sectors) (bt0:1:0): "QUANTUM PD1800S 3162" type 0 fixed SCSI 2 sd1(bt0:1:0): Direct-Access 1717MB (3517856 512 byte sectors) (bt0:6:0): "TOSHIBA CD-ROM XM-3401TA 2873" type 5 removable SCSI 2 cd0(bt0:6:0): CD-ROM cd present.[41150 x 2048 byte records] ahb0 not found aha0 at 0x334-0x337 irq 15 drq 7 on isa aha0 waiting for scsi devices to settle (aha0:5:0): "ARCHIVE ANCDA 2750 28077 -003" type 1 removable SCSI 2 st0(aha0:5:0): Sequential-Access density code 0x0, drive empty npx0 on motherboard npx0: INT 16 interface sb0 at 0x220 irq 3 drq 1 on isa sb0: opl0 at 0x388 on isa opl0: