Date: 29 Apr 2002 15:00:26 -0400 From: Joe Marcus Clarke <marcus@marcuscom.com> To: Larry Rosenman <ler@lerctr.org> Cc: John Utz <john@utzweb.net>, freebsd-stable@FreeBSD.ORG, freebsd-mobile@FreeBSD.ORG Subject: Re: New Laptop: i810: HELP Message-ID: <1020106827.22787.16.camel@gyros.marcuscom.com> In-Reply-To: <20020429170538.GA196@lerlaptop.iadfw.net> References: <20020429164649.GA176@lerlaptop.iadfw.net> <Pine.LNX.4.44.0204291158040.6387-100000@jupiter.linuxengine.net> <20020429170538.GA196@lerlaptop.iadfw.net>
next in thread | previous in thread | raw e-mail | index | archive | help
On Mon, 2002-04-29 at 14:05, Larry Rosenman wrote: > * John Utz <john@utzweb.net> [020429 12:02]: > > well xf86 reports an illegal opcode. that's bad. > > > > start turning things off. gamma correction wold be a good place to > > start....make sure it's not loading drm/dri....too. > How would I do that? I think if you have the i830 chipset, you're currently out of luck. I'm not speaking definitively here, but I have seen some discussion about this on current@. The resident DRM expert, Eric Anholt has a patch at http://gladstone.uoregon.edu/~eanholt/dri/i810diff that may work for you. Again, I may be talking out my ass here, but I didn't want you needlessly searching for an answer that wasn't there. Joe > > Here is the XF86Config file: > > # File generated by xf86config. > > # > # Copyright (c) 1999 by The XFree86 Project, Inc. > # > # Permission is hereby granted, free of charge, to any person obtaining a > # copy of this software and associated documentation files (the "Software"), > # to deal in the Software without restriction, including without limitation > # the rights to use, copy, modify, merge, publish, distribute, sublicense, > # and/or sell copies of the Software, and to permit persons to whom the > # Software is furnished to do so, subject to the following conditions: > # > # The above copyright notice and this permission notice shall be included in > # all copies or substantial portions of the Software. > # > # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR > # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, > # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL > # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF > # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE > # SOFTWARE. > # > # Except as contained in this notice, the name of the XFree86 Project shall > # not be used in advertising or otherwise to promote the sale, use or other > # dealings in this Software without prior written authorization from the > # XFree86 Project. > # > > # ********************************************************************** > # Refer to the XF86Config(4/5) man page for details about the format of > # this file. > # ********************************************************************** > > # ********************************************************************** > # Module section -- this section is used to specify > # which dynamically loadable modules to load. > # ********************************************************************** > # > Section "Module" > > # This loads the DBE extension module. > > Load "dbe" # Double buffer extension > > # This loads the miscellaneous extensions module, and disables > # initialisation of the XFree86-DGA extension within that module. > SubSection "extmod" > # Option "omit xfree86-dga" # don't initialise the DGA extension > EndSubSection > > # This loads the Type1 and FreeType font modules > Load "type1" > Load "freetype" > > # This loads the GLX module > # Load "glx" > > EndSection > > # ********************************************************************** > # Files section. This allows default font and rgb paths to be set > # ********************************************************************** > > Section "Files" > > # The location of the RGB database. Note, this is the name of the > # file minus the extension (like ".txt" or ".db"). There is normally > # no need to change the default. > > RgbPath "/usr/X11R6/lib/X11/rgb" > > # Multiple FontPath entries are allowed (which are concatenated together), > # as well as specifying multiple comma-separated entries in one FontPath > # command (or a combination of both methods) > # > # If you don't have a floating point coprocessor and emacs, Mosaic or other > # programs take long to start up, try moving the Type1 and Speedo directory > # to the end of this list (or comment them out). > # > > FontPath "/usr/X11R6/lib/X11/fonts/local/" > FontPath "/usr/X11R6/lib/X11/fonts/misc/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" > FontPath "/usr/X11R6/lib/X11/fonts/Type1/" > FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" > > # The module search path. The default path is shown here. > > # ModulePath "/usr/X11R6/lib/modules" > > EndSection > > # ********************************************************************** > # Server flags section. > # ********************************************************************** > > Section "ServerFlags" > > # Uncomment this to cause a core dump at the spot where a signal is > # received. This may leave the console in an unusable state, but may > # provide a better stack trace in the core dump to aid in debugging > > # Option "NoTrapSignals" > > # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence > # This allows clients to receive this key event. > > # Option "DontZap" > > # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching > # sequences. This allows clients to receive these key events. > > # Option "Dont Zoom" > > # Uncomment this to disable tuning with the xvidtune client. With > # it the client can still run and fetch card and monitor attributes, > # but it will not be allowed to change them. If it tries it will > # receive a protocol error. > > # Option "DisableVidModeExtension" > > # Uncomment this to enable the use of a non-local xvidtune client. > > # Option "AllowNonLocalXvidtune" > > # Uncomment this to disable dynamically modifying the input device > # (mouse and keyboard) settings. > > # Option "DisableModInDev" > > # Uncomment this to enable the use of a non-local client to > # change the keyboard or mouse settings (currently only xset). > > # Option "AllowNonLocalModInDev" > > EndSection > > # ********************************************************************** > # Input devices > # ********************************************************************** > > # ********************************************************************** > # Core keyboard's InputDevice section > # ********************************************************************** > > Section "InputDevice" > > Identifier "Keyboard1" > Driver "Keyboard" > # For most OSs the protocol can be omitted (it defaults to "Standard"). > # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), > # uncomment the following line. > > # Option "Protocol" "Xqueue" > > Option "AutoRepeat" "500 30" > > # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) > # Option "Xleds" "1 2 3" > > # Option "LeftAlt" "Meta" > # Option "RightAlt" "ModeShift" > > # To customise the XKB settings to suit your keyboard, modify the > # lines below (which are the defaults). For example, for a non-U.S. > # keyboard, you will probably want to use: > # Option "XkbModel" "pc102" > # If you have a US Microsoft Natural keyboard, you can use: > # Option "XkbModel" "microsoft" > # > # Then to change the language, change the Layout setting. > # For example, a german layout can be obtained with: > # Option "XkbLayout" "de" > # or: > # Option "XkbLayout" "de" > # Option "XkbVariant" "nodeadkeys" > # > # If you'd like to switch the positions of your capslock and > # control keys, use: > # Option "XkbOptions" "ctrl:swapcaps" > > # These are the default XKB settings for XFree86 > # Option "XkbRules" "xfree86" > # Option "XkbModel" "pc101" > # Option "XkbLayout" "us" > # Option "XkbVariant" "" > # Option "XkbOptions" "" > > # Option "XkbDisable" > > Option "XkbRules" "xfree86" > Option "XkbModel" "pc104" > Option "XkbLayout" "us" > > EndSection > > > # ********************************************************************** > # Core Pointer's InputDevice section > # ********************************************************************** > > Section "InputDevice" > > # Identifier and driver > > Identifier "Mouse1" > Driver "mouse" > Option "Protocol" "Busmouse" > Option "Device" "/dev/sysmouse" > > # When using XQUEUE, comment out the above two lines, and uncomment > # the following line. > > # Option "Protocol" "Xqueue" > > # Baudrate and SampleRate are only for some Logitech mice. In > # almost every case these lines should be omitted. > > # Option "BaudRate" "9600" > # Option "SampleRate" "150" > > # Emulate3Buttons is an option for 2-button Microsoft mice > # Emulate3Timeout is the timeout in milliseconds (default is 50ms) > > # Option "Emulate3Buttons" > # Option "Emulate3Timeout" "50" > > # ChordMiddle is an option for some 3-button Logitech mice > > # Option "ChordMiddle" > > EndSection > > > # ********************************************************************** > # Other input device sections > # this is optional and is required only if you > # are using extended input devices. This is for example only. Refer > # to the XF86Config man page for a description of the options. > # ********************************************************************** > # > # Section "InputDevice" > # Identifier "Mouse2" > # Driver "mouse" > # Option "Protocol" "MouseMan" > # Option "Device" "/dev/mouse2" > # EndSection > # > # Section "InputDevice" > # Identifier "spaceball" > # Driver "magellan" > # Option "Device" "/dev/cua0" > # EndSection > # > # Section "InputDevice" > # Identifier "spaceball2" > # Driver "spaceorb" > # Option "Device" "/dev/cua0" > # EndSection > # > # Section "InputDevice" > # Identifier "touchscreen0" > # Driver "microtouch" > # Option "Device" "/dev/ttyS0" > # Option "MinX" "1412" > # Option "MaxX" "15184" > # Option "MinY" "15372" > # Option "MaxY" "1230" > # Option "ScreenNumber" "0" > # Option "ReportingMode" "Scaled" > # Option "ButtonNumber" "1" > # Option "SendCoreEvents" > # EndSection > # > # Section "InputDevice" > # Identifier "touchscreen1" > # Driver "elo2300" > # Option "Device" "/dev/ttyS0" > # Option "MinX" "231" > # Option "MaxX" "3868" > # Option "MinY" "3858" > # Option "MaxY" "272" > # Option "ScreenNumber" "0" > # Option "ReportingMode" "Scaled" > # Option "ButtonThreshold" "17" > # Option "ButtonNumber" "1" > # Option "SendCoreEvents" > # EndSection > > # ********************************************************************** > # Monitor section > # ********************************************************************** > > # Any number of monitor sections may be present > > Section "Monitor" > > Identifier "My Monitor" > > # HorizSync is in kHz unless units are specified. > # HorizSync may be a comma separated list of discrete values, or a > # comma separated list of ranges of values. > # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S > # USER MANUAL FOR THE CORRECT NUMBERS. > > # HorizSync 31.5 - 57.0 > > HorizSync 30-64 # multisync > # HorizSync 31.5, 35.2 # multiple fixed sync frequencies > # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies > > # VertRefresh is in Hz unless units are specified. > # VertRefresh may be a comma separated list of discrete values, or a > # comma separated list of ranges of values. > # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S > # USER MANUAL FOR THE CORRECT NUMBERS. > > VertRefresh 50-100 > > EndSection > > > # ********************************************************************** > # Graphics device section > # ********************************************************************** > > # Any number of graphics device sections may be present > > # Standard VGA Device: > > #Section "Device" > # Identifier "Standard VGA" > # VendorName "Unknown" > # BoardName "Unknown" > > # The chipset line is optional in most cases. It can be used to override > # the driver's chipset detection, and should not normally be specified. > > # Chipset "generic" > > # The Driver line must be present. When using run-time loadable driver > # modules, this line instructs the server to load the specified driver > # module. Even when not using loadable driver modules, this line > # indicates which driver should interpret the information in this section. > > # Driver "vga" > # The BusID line is used to specify which of possibly multiple devices > # this section is intended for. When this line isn't present, a device > # section can only match up with the primary video device. For PCI > # devices a line like the following could be used. This line should not > # normally be included unless there is more than one video device > # intalled. > > # BusID "PCI:0:2:0" > > # VideoRam 256 > > # Clocks 25.2 28.3 > > #EndSection > > # Device configured by xf86config: > > Section "Device" > Identifier "Intel 810-1" > Driver "i810" > # Option "NoDDC" > VideoRam 8192 > # Insert Clocks lines here if appropriate > EndSection > > Section "Device" > Identifier "Intel 810-2" > Driver "i810" > # Option "NoDDC" > VideoRam 8192 > # Insert Clocks lines here if appropriate > EndSection > > # ********************************************************************** > # Screen sections > # ********************************************************************** > > # Any number of screen sections may be present. Each describes > # the configuration of a single screen. A single specific screen section > # may be specified from the X server command line with the "-screen" > # option. > Section "Screen" > Identifier "Screen 1" > Device "Intel 810-1" > Monitor "My Monitor" > DefaultDepth 24 > > Subsection "Display" > Depth 8 > Modes "1024x768" > ViewPort 0 0 > EndSubsection > Subsection "Display" > Depth 16 > Modes "1024x768" > ViewPort 0 0 > EndSubsection > Subsection "Display" > Depth 24 > Modes "1024x768" > ViewPort 0 0 > EndSubsection > EndSection > Section "Screen" > Identifier "Screen 2" > Device "Intel 810-2" > Monitor "My Monitor" > DefaultDepth 24 > > Subsection "Display" > Depth 8 > Modes "1024x768" > ViewPort 0 0 > EndSubsection > Subsection "Display" > Depth 16 > Modes "1024x768" > ViewPort 0 0 > EndSubsection > Subsection "Display" > Depth 24 > Modes "1024x768" > ViewPort 0 0 > EndSubsection > EndSection > > > # ********************************************************************** > # ServerLayout sections. > # ********************************************************************** > > # Any number of ServerLayout sections may be present. Each describes > # the way multiple screens are organised. A specific ServerLayout > # section may be specified from the X server command line with the > # "-layout" option. In the absence of this, the first section is used. > # When now ServerLayout section is present, the first Screen section > # is used alone. > > Section "ServerLayout" > > # The Identifier line must be present > Identifier "Simple Layout" > > # Each Screen line specifies a Screen section name, and optionally > # the relative position of other screens. The four names after > # primary screen name are the screens to the top, bottom, left and right > # of the primary screen. In this example, screen 2 is located to the > # right of screen 1. > > Screen "Screen 1" > > # Each InputDevice line specifies an InputDevice section name and > # optionally some options to specify the way the device is to be > # used. Those options include "CorePointer", "CoreKeyboard" and > # "SendCoreEvents". > > InputDevice "Mouse1" "CorePointer" > InputDevice "Keyboard1" "CoreKeyboard" > > EndSection > > > Here is the latest log for reference: > > > XFree86 Version 4.2.0 / X Window System > (protocol Version 11, revision 0, vendor release 6600) > Release Date: 18 January 2002 > If the server is older than 6-12 months, or if your card is > newer than the above date, look for a newer version before > reporting problems. (See http://www.XFree86.Org/) > Build Operating System: FreeBSD 4.5 i386 [ELF] > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Mon Apr 29 12:01:41 2002 > (==) Using config file: "/etc/X11/XF86Config" > (==) ServerLayout "Simple Layout" > (**) |-->Screen "Screen 1" (0) > (**) | |-->Monitor "My Monitor" > (**) | |-->Device "Intel 810-1" > (**) |-->Input Device "Mouse1" > (**) |-->Input Device "Keyboard1" > (**) Option "AutoRepeat" "500 30" > (**) Option "XkbRules" "xfree86" > (**) XKB: rules: "xfree86" > (**) Option "XkbModel" "pc104" > (**) XKB: model: "pc104" > (**) Option "XkbLayout" "us" > (**) XKB: layout: "us" > (==) Keyboard: CustomKeycode disabled > (WW) `fonts.dir' not found (or not valid) in "/usr/X11R6/lib/X11/fonts/local/". > Entry deleted from font path. > (Run 'mkfontdir' on "/usr/X11R6/lib/X11/fonts/local/"). > (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" > (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (--) Using syscons driver with X support (version 2.0) > (--) using VT number 9 > > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.1 > XFree86 Video Driver: 0.5 > XFree86 XInput driver : 0.3 > XFree86 Server Extension : 0.1 > XFree86 Font Renderer : 0.3 > (II) Loader running on freebsd > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 8086,3575 card 10cf,113b rev 04 class 06,00,00 hdr 00 > (II) PCI: 00:02:0: chip 8086,3577 card 10cf,113c rev 04 class 03,00,00 hdr 80 > (II) PCI: 00:02:1: chip 8086,3577 card 10cf,113c rev 00 class 03,80,00 hdr 80 > (II) PCI: 00:1d:0: chip 8086,2482 card 10cf,113d rev 02 class 0c,03,00 hdr 80 > (II) PCI: 00:1d:1: chip 8086,2484 card 10cf,113d rev 02 class 0c,03,00 hdr 00 > (II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 42 class 06,04,00 hdr 01 > (II) PCI: 00:1f:0: chip 8086,248c card 0000,0000 rev 02 class 06,01,00 hdr 80 > (II) PCI: 00:1f:1: chip 8086,248a card 10cf,113d rev 02 class 01,01,8a hdr 00 > (II) PCI: 00:1f:3: chip 8086,2483 card 10cf,113d rev 02 class 0c,05,00 hdr 00 > (II) PCI: 00:1f:5: chip 8086,2485 card 10cf,112f rev 02 class 04,01,00 hdr 00 > (II) PCI: 00:1f:6: chip 8086,2486 card 10cf,10d1 rev 02 class 07,03,00 hdr 00 > (II) PCI: 01:0a:0: chip 104c,ac55 card 0000,0000 rev 01 class 06,07,00 hdr 82 > (II) PCI: 01:0a:1: chip 104c,ac55 card 0000,0000 rev 01 class 06,07,00 hdr 82 > (II) PCI: 01:0d:0: chip 10ec,8139 card 10cf,111c rev 10 class 02,00,00 hdr 00 > (II) PCI: 01:0e:0: chip 10cf,2010 card 10cf,112b rev 01 class 0c,00,10 hdr 00 > (II) PCI: End of PCI scan > (II) LoadModule: "scanpci" > (II) Loading /usr/X11R6/lib/modules/libscanpci.a > (II) Module scanpci: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) UnloadModule: "scanpci" > (II) Unloading /usr/X11R6/lib/modules/libscanpci.a > (II) Host-to-PCI bridge: > (II) PCI-to-ISA bridge: > (II) PCI-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 1: bridge is at (0:30:0), (0,1,3), BCTRL: 0x04 (VGA_EN is cleared) > (II) Bus 1 I/O range: > [0] -1 0x00002000 - 0x000020ff (0x100) IX[B] > [1] -1 0x00002400 - 0x000024ff (0x100) IX[B] > [2] -1 0x00002800 - 0x000028ff (0x100) IX[B] > [3] -1 0x00002c00 - 0x00002cff (0x100) IX[B] > (II) Bus 1 non-prefetchable memory range: > [0] -1 0xe0200000 - 0xe02fffff (0x100000) MX[B] > (II) Bus 1 prefetchable memory range: > (II) Bus -1: bridge is at (0:31:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) > (II) Bus -1 I/O range: > (II) Bus -1 non-prefetchable memory range: > (II) Bus -1 prefetchable memory range: > (--) PCI:*(0:2:0) Intel i830M rev 4, Mem @ 0xe8000000/27, 0xe0000000/19 > (--) PCI: (0:2:1) Intel i830M rev 0, Mem @ 0xf0000000/27, 0xe0080000/19 > (II) Addressable bus resource ranges are > [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] > (II) Active PCI resource ranges: > [0] -1 0xe0200000 - 0xe03fffff (0x200000) MX[B]E > [1] -1 0xe0200800 - 0xe0200fff (0x800) MX[B]E > [2] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E > [3] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B) > [4] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) > [5] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B) > [6] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) > [7] -1 0x00002000 - 0x000020ff (0x100) IX[B]E > [8] -1 0x00001800 - 0x000018ff (0x100) IX[B]E > [9] -1 0x00001400 - 0x000014ff (0x100) IX[B]E > [10] -1 0x00001880 - 0x000018ff (0x80) IX[B]E > [11] -1 0x00001000 - 0x000010ff (0x100) IX[B]E > [12] -1 0x00001c00 - 0x00001cff (0x100) IX[B]E > [13] -1 0x00001c20 - 0x00001c3f (0x20) IX[B]E > [14] -1 0x00000374 - 0x00000377 (0x4) IX[B]E > [15] -1 0x00000170 - 0x0000017f (0x10) IX[B]E > [16] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E > [17] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E > [18] -1 0x000018e0 - 0x000018ff (0x20) IX[B]E > [19] -1 0x000018c0 - 0x000018ff (0x40) IX[B]E > (II) PCI Memory resource overlap reduced 0xe0200000 from 0xe03fffff to 0xe02007ff > (II) PCI I/O resource overlap reduced 0x00001800 from 0x000018ff to 0x0000187f > (II) PCI I/O resource overlap reduced 0x00001880 from 0x000018ff to 0x000018bf > (II) PCI I/O resource overlap reduced 0x00001c00 from 0x00001cff to 0x00001c1f > (II) PCI I/O resource overlap reduced 0x000018c0 from 0x000018ff to 0x000018df > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0xe0200000 - 0xe02007ff (0x800) MX[B]E > [1] -1 0xe0200800 - 0xe0200fff (0x800) MX[B]E > [2] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E > [3] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B) > [4] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) > [5] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B) > [6] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) > [7] -1 0x00002000 - 0x000020ff (0x100) IX[B]E > [8] -1 0x00001800 - 0x0000187f (0x80) IX[B]E > [9] -1 0x00001400 - 0x000014ff (0x100) IX[B]E > [10] -1 0x00001880 - 0x000018bf (0x40) IX[B]E > [11] -1 0x00001000 - 0x000010ff (0x100) IX[B]E > [12] -1 0x00001c00 - 0x00001c1f (0x20) IX[B]E > [13] -1 0x00001c20 - 0x00001c3f (0x20) IX[B]E > [14] -1 0x00000374 - 0x00000377 (0x4) IX[B]E > [15] -1 0x00000170 - 0x0000017f (0x10) IX[B]E > [16] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E > [17] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E > [18] -1 0x000018e0 - 0x000018ff (0x20) IX[B]E > [19] -1 0x000018c0 - 0x000018df (0x20) IX[B]E > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0xe0200000 - 0xe02007ff (0x800) MX[B]E > [6] -1 0xe0200800 - 0xe0200fff (0x800) MX[B]E > [7] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E > [8] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B) > [9] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) > [10] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B) > [11] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) > [12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [13] -1 0x00000000 - 0x000000ff (0x100) IX[B] > [14] -1 0x00002000 - 0x000020ff (0x100) IX[B]E > [15] -1 0x00001800 - 0x0000187f (0x80) IX[B]E > [16] -1 0x00001400 - 0x000014ff (0x100) IX[B]E > [17] -1 0x00001880 - 0x000018bf (0x40) IX[B]E > [18] -1 0x00001000 - 0x000010ff (0x100) IX[B]E > [19] -1 0x00001c00 - 0x00001c1f (0x20) IX[B]E > [20] -1 0x00001c20 - 0x00001c3f (0x20) IX[B]E > [21] -1 0x00000374 - 0x00000377 (0x4) IX[B]E > [22] -1 0x00000170 - 0x0000017f (0x10) IX[B]E > [23] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E > [24] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E > [25] -1 0x000018e0 - 0x000018ff (0x20) IX[B]E > [26] -1 0x000018c0 - 0x000018df (0x20) IX[B]E > (II) LoadModule: "dbe" > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "extmod" > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.1 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension FontCache > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) LoadModule: "type1" > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 1.0.1 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font Type1 > (II) Loading font CID > (II) LoadModule: "freetype" > (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a > (II) Module freetype: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 1.1.10 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.3 > (II) Loading font FreeType > (II) LoadModule: "i810" > (II) Loading /usr/X11R6/lib/modules/drivers/i810_drv.o > (II) Module i810: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 1.1.0 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.5 > (II) LoadModule: "mouse" > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 1.0.0 > Module class: XFree86 XInput Driver > ABI class: XFree86 XInput driver, version 0.3 > (II) I810: Driver for Intel i810 chipset: i810, i810-dc100, i810e, i815, > i830M > (II) Primary Device is: PCI 00:02:0 > (--) Assigning device section with no busID to primary device > (WW) I810: No matching Device section for instance (BusID PCI:0:2:1) found > (--) Chipset i830M found > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0xe0200000 - 0xe02007ff (0x800) MX[B]E > [6] -1 0xe0200800 - 0xe0200fff (0x800) MX[B]E > [7] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E > [8] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B) > [9] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) > [10] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B) > [11] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) > [12] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [13] -1 0x00000000 - 0x000000ff (0x100) IX[B] > [14] -1 0x00002000 - 0x000020ff (0x100) IX[B]E > [15] -1 0x00001800 - 0x0000187f (0x80) IX[B]E > [16] -1 0x00001400 - 0x000014ff (0x100) IX[B]E > [17] -1 0x00001880 - 0x000018bf (0x40) IX[B]E > [18] -1 0x00001000 - 0x000010ff (0x100) IX[B]E > [19] -1 0x00001c00 - 0x00001c1f (0x20) IX[B]E > [20] -1 0x00001c20 - 0x00001c3f (0x20) IX[B]E > [21] -1 0x00000374 - 0x00000377 (0x4) IX[B]E > [22] -1 0x00000170 - 0x0000017f (0x10) IX[B]E > [23] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E > [24] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E > [25] -1 0x000018e0 - 0x000018ff (0x20) IX[B]E > [26] -1 0x000018c0 - 0x000018df (0x20) IX[B]E > (II) resource ranges after probing: > [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0xe0200000 - 0xe02007ff (0x800) MX[B]E > [6] -1 0xe0200800 - 0xe0200fff (0x800) MX[B]E > [7] -1 0xe0100000 - 0xe01fffff (0x100000) MX[B]E > [8] -1 0xe0080000 - 0xe00fffff (0x80000) MX[B](B) > [9] -1 0xf0000000 - 0xf7ffffff (0x8000000) MX[B](B) > [10] -1 0xe0000000 - 0xe007ffff (0x80000) MX[B](B) > [11] -1 0xe8000000 - 0xefffffff (0x8000000) MX[B](B) > [12] 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [13] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [14] 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] > [16] -1 0x00000000 - 0x000000ff (0x100) IX[B] > [17] -1 0x00002000 - 0x000020ff (0x100) IX[B]E > [18] -1 0x00001800 - 0x0000187f (0x80) IX[B]E > [19] -1 0x00001400 - 0x000014ff (0x100) IX[B]E > [20] -1 0x00001880 - 0x000018bf (0x40) IX[B]E > [21] -1 0x00001000 - 0x000010ff (0x100) IX[B]E > [22] -1 0x00001c00 - 0x00001c1f (0x20) IX[B]E > [23] -1 0x00001c20 - 0x00001c3f (0x20) IX[B]E > [24] -1 0x00000374 - 0x00000377 (0x4) IX[B]E > [25] -1 0x00000170 - 0x0000017f (0x10) IX[B]E > [26] -1 0x000003f4 - 0x000003f7 (0x4) IX[B]E > [27] -1 0x000001f0 - 0x000001ff (0x10) IX[B]E > [28] -1 0x000018e0 - 0x000018ff (0x20) IX[B]E > [29] -1 0x000018c0 - 0x000018df (0x20) IX[B]E > [30] 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [31] 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Setting vga for screen 0. > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/X11R6/lib/modules/libvgahw.a > (II) Module vgahw: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.5 > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Loading /usr/X11R6/lib/modules/libint10.a > (II) Module int10: vendor="The XFree86 Project" > compiled for 4.2.0, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.5 > (**) I810(0): Depth 24, (--) framebuffer bpp 32 > (==) I810(0): RGB weight 888 > (==) I810(0): Default visual is TrueColor > (==) I810(0): Write-combining range (0xa0000,0x20000) was already clear > (==) I810(0): Write-combining range (0xf0000,0x10000) > (WW) I810(0): Bad V_BIOS checksum > (II) I810(0): Primary V_BIOS segment is: 0xc000 > (--) I810(0): Chipset: "i830" > (--) I810(0): Linear framebuffer at 0xE8000000 > (--) I810(0): IO registers at addr 0xE0000000 > (II) I810(0): detected 8192K stolen memory. > (II) I810(0): I810CheckAvailableMemory: 208896k available > (==) I810(0): Will alloc AGP framebuffer: 8192 kByte > (==) I810(0): Using gamma correction (1.0, 1.0, 1.0) > c000:01a2: 62 ILLEGAL X86 OPCODE! > (II) I810(0): Failed to detect active display devices > (EE) I810(0): Couldn't detect display devices. > (II) UnloadModule: "i810" > (II) UnloadModule: "int10" > (II) Unloading /usr/X11R6/lib/modules/libint10.a > (II) UnloadModule: "vgahw" > (II) Unloading /usr/X11R6/lib/modules/libvgahw.a > (EE) Screen(s) found, but none have a usable configuration. > > Fatal server error: > no screens found > > When reporting a problem related to a server crash, please send > the full server output, not just the last messages. > This can be found in the log file "/var/log/XFree86.0.log". > Please report problems to xfree86@xfree86.org. > > -- > Larry Rosenman, Sr. Network Engineer, Internet America, Inc. > E-Mail: ler@airmail.net > Phone: +1 214-861-2571, Fax: 214-861-2663 > US Mail: 350 N. St. Paul, Suite 3000, Dallas, TX 75201 > > To Unsubscribe: send mail to majordomo@FreeBSD.org > with "unsubscribe freebsd-mobile" in the body of the message > -- PGP Key: http://www.marcuscom.com/pgp.asc To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1020106827.22787.16.camel>