Date: Fri, 1 Mar 2002 18:10:12 -0800 (PST) From: Brian Howell <bsdmobile@yahoo.com> To: freebsd-mobile@freebsd.org Subject: 3com pci card not being recognized Message-ID: <20020302021012.19636.qmail@web21305.mail.yahoo.com>
next in thread | raw e-mail | index | archive | help
I had some problems configuring my orinoco card with a pci adapter on my freebsd 4.4 box.So was trying to set up my 3com pci card now to check if its a problem with pci adapters on my system.can anyone tell me where i shd do the modifications required for it to be recognized.its being put on the pci irq right now. am attaching my dmesg below. Features=0x80f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,MMX> real memory = 67108864 (65536K bytes) avail memory = 60432384 (59016K bytes) Preloaded elf kernel "kernel" at 0xc04cd000. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 7 entries at 0xc00fdf50 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443LX (440 LX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82443LX (440 LX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfcd0-0xfcdf at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfce0-0xfcff irq 9 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered chip1: <Intel 82371AB Power management controller> port 0x7000-0x700f at device 7.3 on pci0 pci0: <ATI Mach64-GU graphics accelerator> at 13.0 tx0: <SMC EtherPower II 10/100> port 0xf400-0xf4ff mem 0xfedfe000-0xfedfefff irq 11 at device 14.0 on pci0 miibus0: <MII bus> on tx0 qsphy0: <QS6612 10/100 media interface> on miibus0 qsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto tx0: address 00:e0:29:11:6d:85, type SMC9432TX pcm0: <AudioPCI ES1371-A> port 0xfc40-0xfc7f irq 10 at device 15.0 on pci0 pci0: <unknown card> (vendor=0x10b7, dev=0x7770) at 16.0 irq 9 orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xe8000-0xeffff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model IntelliMouse, device ID 3 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 ad0: 4112MB <WDC AC24300L> [8912/15/63] at ata0-master UDMA33 acd0: CDROM <TOSHIBA CD-ROM XM-6102B> at ata1-master using PIO3 Mounting root from ufs:/dev/ad0s2a __________________________________________________ Do You Yahoo!? Yahoo! Sports - sign up for Fantasy Baseball http://sports.yahoo.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20020302021012.19636.qmail>