Date: Mon, 4 Dec 2006 10:47:44 -0800 From: "Derrick Ryalls" <ryallsd@gmail.com> To: FreeBSD-questions <questions@freebsd.org> Subject: Fwd: DGE-530T nic not found on 5.5 Message-ID: <d5eb95fc0612041047o7361f30co86dc97c06a8daf7e@mail.gmail.com> In-Reply-To: <d5eb95fc0611272145q66168e37r949f71c161bc35a9@mail.gmail.com> References: <d5eb95fc0611272145q66168e37r949f71c161bc35a9@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
[Resending with more info] Greetings, I have a fileserver I installed this nic on but the device fails to show in ifconfig uname: 5.5-STABLE FreeBSD 5.5-STABLE #2: Sun Oct 29 14:12:46 PST 2006 user@somewhere.com:/usr/obj/usr/src/sys/FRODO Except from FRODO kernel file (generic plus some): # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device bfe # Broadcom BCM440x 10/100 Ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device lge # Level 1 LXT1001 gigabit ethernet device nge # NatSemi DP83820 gigabit ethernet device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc') device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet device ste # Sundance ST201 (D-Link DFE-550TX) device ti # Alteon Networks Tigon I/II gigabit Ethernet device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vge # VIA VT612x gigabit ethernet device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') dmesg except: pci0: <network, ethernet> at device 6.0 (no driver attached) vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xdc00-0xdcff mem 0xdfffbe00-0xdfffbeff irq 23 at device 18.0 on pci0 miibus0: <MII bus> on vr0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto vr0: Ethernet address: xx:xx:xx:xx:xx:xx The reference to vr0 are for the onboard nic that it is currently running off of. ifconfig lists vr0, plip0, lo0 ===[frodo][root] ~ # pciconf -l agp0@pci0:0:0: class=0x060000 card=0x00001106 chip=0x30991106 rev=0x00 hdr=0x00 pcib1@pci0:1:0: class=0x060400 card=0x00000080 chip=0xb0991106 rev=0x00 hdr=0x01 none0@pci0:6:0: class=0x020000 card=0x4b011186 chip=0x4b011186 rev=0x11 hdr=0x00 uhci0@pci0:16:0: class=0x0c0300 card=0x76401462 chip=0x30381106 rev=0x80 hdr=0x00 uhci1@pci0:16:1: class=0x0c0300 card=0x76401462 chip=0x30381106 rev=0x80 hdr=0x00 uhci2@pci0:16:2: class=0x0c0300 card=0x76401462 chip=0x30381106 rev=0x80 hdr=0x00 ehci0@pci0:16:3: class=0x0c0320 card=0x76401462 chip=0x31041106 rev=0x82 hdr=0x00 isab0@pci0:17:0: class=0x060100 card=0x00001106 chip=0x31771106 rev=0x00 hdr=0x00 atapci0@pci0:17:1: class=0x01018a card=0x76401462 chip=0x05711106 rev=0x06 hdr=0x00 vr0@pci0:18:0: class=0x020000 card=0x01021106 chip=0x30651106 rev=0x74 hdr=0x00 none1@pci1:0:0: class=0x030000 card=0x000da0a0 chip=0x002d10de rev=0x15 hdr=0x00 Doing some searching, someone posted this part of dmesg on a 5.4 PRERELEASE system: skc0: <D-Link DGE-530T Gigabit Ethernet> port 0x7400-0x74ff mem 0xfb800000-0xfb803fff irq 18 at device 10.0 on pci2 skc0: (null) rev. (0x1) sk0: <Marvell Semiconductor, Inc. Yukon> on skc0 sk0: Ethernet address: 00:0f:3d:f2:45:0c miibus0: <MII bus> on sk0 e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0 e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto I did check the hardware notes before buying this nic, and according to http://www.freebsd.org/releases/5.5R/hardware-i386.html it is supported. Have I missed a switch somewhere? Thanks in advance. -Derrick
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?d5eb95fc0612041047o7361f30co86dc97c06a8daf7e>