Date: Thu, 07 Feb 2002 17:49:39 -0800 From: Maksim Yevmenkin <myevmenk@digisle.net> To: freebsd-mobile@freebsd.org Subject: Need help with pccard Message-ID: <3C632EB3.978DDFA@digisle.net> References: <Lvnl8A7dZ000051dc@OWA-UK-1.digisle.com>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------65BE0391DB117D63BB6EB3E9 Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Hackers, i was trying to bring this beast to life the whole day, but had no luck :( Hardware: 1) Laptop: Toshiba Tecra 8100 2) PC Card: 3COM Wireless Bluetooth PC card 3CRWB6096-HP M/N: SL-1022 Problem: The card looks like serial port/modem card, but it does not work like one. i added some debug printf's into sio.c and it looks like sio fails to identify the chip. (see output in attached file) However, if i adjust my device.hints file then sio will recognize the chip as 8250 UART. the same effect can be achieved by killing and then starting pccardd again. (see output in attached file) but that is not all, even if i can force sio to recognize the card when i try to access it (write to /dev/cuaa?, /dev/tty?) my laptop hangs completely. i even can not break into debugger. i'm attaching some useful (i hope) information. any suggestion how to resolve/debug the problem would be greatly appreciated. thanks, max p.s. linux also was not able to recognize the card :( --------------65BE0391DB117D63BB6EB3E9 Content-Type: text/plain; charset=us-ascii; name="info.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="info.txt" # uname -a FreeBSD beetle 5.0-CURRENT FreeBSD 5.0-CURRENT #12: Thu Feb 7 12:23:45 PST 2002 root@beetle:/usr/src/sys/i386/compile/BEETLE i386 ============================8<======================================== boot -v output # dmesg Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #12: Thu Feb 7 12:23:45 PST 2002 root@beetle:/usr/src/sys/i386/compile/BEETLE Preloaded elf kernel "/boot/kernel/kernel" at 0xc0391000. Preloaded elf module "/boot/kernel/nmdm.ko" at 0xc03910b4. Calibrating clock(s) ... TSC clock: 597790040 Hz, i8254 clock: 1193193 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz CLK_USE_TSC_CALIBRATION not specified - using old calibration method Timecounter "TSC" frequency 597787007 Hz CPU: Pentium III/Pentium III Xeon/Celeron (597.79-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x681 Stepping = 1 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 134086656 (130944K bytes) Physical memory chunk(s): 0x00001000 - 0x0009efff, 647168 bytes (158 pages) 0x003b8000 - 0x07fd7fff, 130154496 bytes (31776 pages) avail memory = 126844928 (123872K bytes) bios32: Found BIOS32 Service Directory header at 0xc00f0220 bios32: Entry = 0xfc36c (c00fc36c) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf0000+0xee03 pnpbios: Found PnP BIOS data at 0xc00f07a0 pnpbios: Entry = f0000:927f Rev = 1.0 pnpbios: Event flag at 510 pnpbios: OEM ID 6934f351 Other BIOS signatures found: random: <entropy source> null: <null device, zero device> mem: <memory & I/O> Pentium Pro MTRR support enabled pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086) Using $PIR table, 10 entries at 0xc00f0130 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard pci0: physical bus=0 map[10]: type 3, range 32, base e0000000, size 27, enabled found-> vendor=0x8086, dev=0x7190, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 found-> vendor=0x8086, dev=0x7191, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 found-> vendor=0x1179, dev=0x0611, revid=0x51 bus=0, slot=3, func=0 class=06-01-00, hdrtype=0x00, mfdev=0 found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=5, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 map[20]: type 4, range 32, base 0000fff0, size 4, enabled found-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=5, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 map[20]: type 4, range 32, base 0000ff80, size 5, enabled found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=5, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 intpin=d, irq=11 map[90]: type 4, range 32, base 0000fe70, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x03 bus=0, slot=5, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 map[10]: type 4, range 32, base 0000ff60, size 5, enabled found-> vendor=0x1179, dev=0x0d01, revid=0x00 bus=0, slot=9, func=0 class=0d-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=11 powerspec 2 supports D0 D1 D3 current D0 map[10]: type 1, range 32, base efff8000, size 15, enabled map[14]: type 4, range 32, base 0000ff00, size 6, enabled map[18]: type 4, range 32, base 0000fefc, size 2, enabled found-> vendor=0x1073, dev=0x0010, revid=0x02 bus=0, slot=12, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 intpin=a, irq=11 powerspec 1 supports D0 D2 D3 current D0 map[10]: type 4, range 32, base 0000fd80, size 7, enabled map[14]: type 1, range 32, base efff7f80, size 7, enabled found-> vendor=0x10b7, dev=0x9200, revid=0x6c bus=0, slot=15, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 pci0: <PCI bus> on pcib0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xf000-0xfff pcib1: memory decode 0xf0000000-0xf7ffffff pcib1: prefetched decode 0xfff00000-0xfffff pci1: physical bus=1 map[10]: type 1, range 32, base f0000000, size 27, enabled found-> vendor=0x5333, dev=0x8c10, revid=0x11 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 3.0 on pci0 isa0: <ISA bus> on isab0 PCI-ISA bridge with incorrect subclass 0x80 PCI-ISA bridge with incorrect subclass 0x80 isab1: <PCI-ISA bridge> at device 5.0 on pci0 isa-: isa0 already exists, skipping it atapci0: <Intel PIIX4 ATA33 controller> port 0xfff0-0xffff at device 5.1 on pci0 ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xfff0 ata0: mask=03 ostat0=50 ostat2=00 ata0-slave: ATAPI probe 00 00 ata0-master: ATAPI probe 00 00 ata0: mask=03 stat0=50 stat1=00 ata0-master: ATA probe 01 a5 ata0: devices=01 ata0: at 0x1f0 irq 14 on atapci0 ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xfff8 ata1: mask=03 ostat0=50 ostat2=00 ata1-master: ATAPI probe 14 eb ata1-slave: ATAPI probe 14 eb ata1: mask=03 stat0=00 stat1=00 ata1: devices=0c ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xff80-0xff9f irq 11 at device 5.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1: Texas Instruments UT-USB41 hub, class 9/0, rev 1.00/1.00, addr 2 uhub1: 4 ports with 4 removable, self powered pci0: <bridge, PCI-unknown> at device 5.3 (no driver attached) pci0: <unknown> at device 9.0 (no driver attached) pcm0: <Yamaha DS-1E (YMF744)> port 0xfefc-0xfeff,0xff00-0xff3f mem 0xefff8000-0xefffffff irq 11 at device 12.0 on pci0 ds1: setmap (3e7000, 3de4), nseg=1, error=0 pcm0: ac97 codec id 0x414b4d05 pcm0: ac97 codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, AKM 3D Audio pcm0: ac97 primary codec extended features variable rate PCM, AMAP pcm: setmap 404000, 1000; 0xc0f50000 -> 404000 pcm: setmap 406000, 1000; 0xc0f52000 -> 406000 pcm: setmap 408000, 1000; 0xc0f54000 -> 408000 pcm: setmap 3eb000, 1000; 0xc0f57000 -> 3eb000 pcm: setmap 3ee000, 1000; 0xc0f5a000 -> 3ee000 pcm: setmap 410000, 1000; 0xc0f5c000 -> 410000 xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xfd80-0xfdff mem 0xefff7f80-0xefff7fff irq 11 at device 15.0 on pci0 xl0: Ethernet address: 00:00:39:8c:1e:26 xl0: media options word: a xl0: found MII/AUTO miibus0: <MII bus> on xl0 xlphy0: <3c905C 10/100 internal PHY> on miibus0 xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bpf: xl0 attached ata-: ata0 already exists, skipping it ata-: ata1 already exists, skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 pnpbios: 16 devices, largest 262 bytes PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000 PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000 PNP0c01: adding fixed memory32 range 0x100000-0x7fdffff, size=0x7ee0000 PNP0c01: adding fixed memory32 range 0x7fe0000-0x7feffff, size=0x10000 PNP0c01: adding fixed memory32 range 0x7ff0000-0x7ffffff, size=0x10000 PNP0c01: adding fixed memory32 range 0x100a0000-0x100fffff, size=0x60000 PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000 pnpbios: handle 1 device ID PNP0c01 (010cd041) PNP0200: adding io range 0-0xf, size=0x10, align=0x1 PNP0200: adding io range 0x81-0x83, size=0x3, align=0x1 PNP0200: adding io range 0x87-0x87, size=0x1, align=0x1 PNP0200: adding io range 0x89-0x8b, size=0x3, align=0x1 PNP0200: adding io range 0x8f-0x8f, size=0x1, align=0x1 PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1 PNP0200: adding dma mask 0x10 pnpbios: handle 2 device ID PNP0200 (0002d041) PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1 PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1 PNP0000: adding irq mask 0x4 pnpbios: handle 3 device ID PNP0000 (0000d041) PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1 PNP0100: adding irq mask 0x1 pnpbios: handle 4 device ID PNP0100 (0001d041) PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1 pnpbios: handle 5 device ID PNP0800 (0008d041) PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1 PNP0c04: adding irq mask 0x2000 pnpbios: handle 6 device ID PNP0c04 (040cd041) PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1 PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1 PNP0303: adding irq mask 0x2 pnpbios: handle 7 device ID PNP0303 (0303d041) PNP0f13: adding irq mask 0x1000 pnpbios: handle 8 device ID PNP0f13 (130fd041) PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1 PNP0b00: adding irq mask 0x100 pnpbios: handle 9 device ID PNP0b00 (000bd041) PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1 PNP0c02: adding io range 0x84-0x86, size=0x3, align=0x1 PNP0c02: adding io range 0x88-0x88, size=0x1, align=0x1 PNP0c02: adding io range 0x8c-0x8e, size=0x3, align=0x1 PNP0c02: adding io range 0xe0-0xef, size=0x10, align=0x1 PNP0c02: adding io range 0xb0-0xb2, size=0x3, align=0x1 PNP0c02: adding io range 0x62-0x62, size=0x1, align=0x1 PNP0c02: adding io range 0x66-0x66, size=0x1, align=0x1 PNP0c02: adding io range 0x6d-0x6d, size=0x1, align=0x1 PNP0c02: adding io range 0x6f-0x6f, size=0x1, align=0x1 PNP0c02: adding io range 0x480-0x48f, size=0x10, align=0x1 PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1 PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1 PNP0c02: adding io range 0x22-0x22, size=0x1, align=0x1 PNP0c02: adding io range 0x92-0x92, size=0x1, align=0x1 PNP0c02: adding io range 0xe000-0xe07f, size=0x80, align=0x1 PNP0c02: adding io range 0xe080-0xe0ff, size=0x80, align=0x1 PNP0c02: adding io range 0xe400-0xe47f, size=0x80, align=0x1 PNP0c02: adding io range 0xe480-0xe4ff, size=0x80, align=0x1 PNP0c02: adding io range 0xe800-0xe87f, size=0x80, align=0x1 PNP0c02: adding io range 0xe880-0xe8ff, size=0x80, align=0x1 PNP0c02: adding io range 0xec00-0xec7f, size=0x80, align=0x1 PNP0c02: adding io range 0xec80-0xecff, size=0x80, align=0x1 PNP0c02: adding io range 0xfd00-0xfd3f, size=0x40, align=0x1 PNP0c02: adding io range 0xfeac-0xfeac, size=0x1, align=0x1 PNP0c02: adding io range 0xfe00-0xfe41, size=0x42, align=0x1 PNP0c02: adding io range 0xfe50-0xfe57, size=0x8, align=0x1 PNP0c02: adding io range 0xfe70-0xfe7f, size=0x10, align=0x1 PNP0c02: adding io range 0xfe90-0xfe97, size=0x8, align=0x1 PNP0c02: adding io range 0xfe9e-0xfe9e, size=0x1, align=0x1 PNP0c02: adding irq mask 0x200 pnpbios: handle 10 device ID PNP0c02 (020cd041) PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0x1 PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1 PNP0700: adding irq mask 0x40 PNP0700: adding dma mask 0x4 pnpbios: handle 11 device ID PNP0700 (0007d041) PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1 PNP0501: adding irq mask 0x10 pnpbios: handle 14 device ID PNP0501 (0105d041) pnpbios: handle 17 device ID PNP0a03 (030ad041) pnpbios: handle 18 device ID PNP0400 (0004d041) PNP0e00: adding io range 0x3e0-0x3e1, size=0x2, align=0x1 pnpbios: handle 19 device ID PNP0e00 (000ed041) pnpbios: handle 38 device ID YMH0110 (1001a865) sc-: sc0 already exists, skipping it vga-: vga0 already exists, skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0 adv0 failed to probe on isa0 aha0 failed to probe on isa0 aic0 failed to probe on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: current command byte:0047 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0-51, 3 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:08, syncbits:08 bt0 failed to probe on isa0 cs0 failed to probe at port 0x300 on isa0 ed0 failed to probe at port 0x280 iomem 0xd8000 irq 10 on isa0 fdc0: <enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fe0 failed to probe at port 0x300 on isa0 ie0 failed to probe at port 0x300 iomem 0xd0000 irq 10 on isa0 le0 failed to probe at port 0x300 iomem 0xd0000 irq 5 on isa0 lnc0 failed to probe at port 0x280 irq 10 drq 0 on isa0 pcic0: <Intel i82365SL-A/B> at port 0x3e0 iomem 0xd0000 on isa0 pcic0: Polling mode pccard0: <PC Card bus (classic)> on pcic0 pccard1: <PC Card bus (classic)> on pcic0 pmtimer0 on isa0 ppc0 failed to probe at irq 7 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x41 0x51 0x51 0x51 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sn0 failed to probe at port 0x300 irq 10 on isa0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0 failed to probe on isa0 isa_probe_children: probing PnP devices unknown: <PNP0800> failed to probe at port 0x61 on isa0 unknown: <PNP0303> can't assign resources unknown: <PNP0303> at port 0x60 on isa0 unknown: <PNP0f13> can't assign resources unknown: <PNP0f13> at irq 12 on isa0 unknown: <PNP0700> can't assign resources unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0 unknown: <PNP0501> can't assign resources unknown: <PNP0501> at port 0x3f8-0x3ff on isa0 unknown: <PNP0400> failed to probe on isa0 unknown: <PNP0e00> failed to probe at port 0x3e1-0x3e2 on isa0 unknown: <YMH0110> failed to probe on isa0 BIOS Geometries: 0:03fffe3f 0..1023=1024 cylinders, 0..254=255 heads, 1..63=63 sectors 0 accounted for Device configuration finished. procfs registered bpf: lo0 attached IP packet filtering initialized, divert enabled, rule-based forwarding disabled, default to deny, logging limited to 100 packets/entry by default ata1-slave: ata_command: timeout waiting for intr ata1-slave: ATAPI identify failed ad0: success setting UDMA2 on Intel chip Creating DISK ad0 ad0: <IBM-DARA-212000/AR4OA53A> ATA-4 disk at ata0-master ad0: 11513MB (23579136 sectors), 23392 C, 16 H, 63 S, 512 B ad0: 16 secs/int, 1 depth queue, UDMA33 ad0: piomode=4 dmamode=2 udmamode=4 cblid=1 ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1 ata1-master: success setting PIO4 on generic chip acd0: <TOSHIBA DVD-ROM SD-C2302/1315> DVD-ROM drive at ata1 as master acd0: read 4134KB/s (34515KB/s), 128KB buffer, PIO4 acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R acd0: Writes: acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc Mounting root from ufs:/dev/ad0s2a ad0s1: type 0xb, start 63, end = 8385929, size 8385867 : OK ad0s2: type 0xa5, start 8385930, end = 12418244, size 4032315 : OK ad0s3: type 0xa5, start 12418245, end = 23567354, size 11149110 : OK start_init: trying /sbin/init Linux ELF exec handler installed linprocfs registered splash: image decoder found: logo_saver /dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 $ /dev/vmmon: Module vmmon: initialized bpf: vmnet1 attached ============================8<======================================== Insert card and # tail -15 /var/log/messages Feb 7 17:02:55 beetle login: ROOT LOGIN (root) ON ttyv3 Feb 7 17:03:16 beetle kernel: pccard: card inserted, slot 0 Feb 7 17:03:16 beetle kernel: pcic0: reset 1 int is 0 stat is ff Feb 7 17:03:17 beetle kernel: pcic0: reset 2 int is 60 stat is ef Feb 7 17:03:17 beetle kernel: pcic0: reset 3 int is 60 stat is ef Feb 7 17:03:22 beetle pccardd[127]: Card "3COM"("3CRWB60-A") [Bluetooth PC Card] [(null)] matched "3COM" ("3CRWB60-A") [Bluetooth PC Card] [(null)] Feb 7 17:03:22 beetle pccardd[127]: Using I/O addr 0x240, size 8 Feb 7 17:03:22 beetle pccardd[127]: Setting config reg at offs 0x320 to 0x70, Reset time = 50 ms Feb 7 17:03:27 beetle kernel: pccard0: Assigning sio1: io 0x240-0x247 irq 3 mem 0x0-0xffffffff Feb 7 17:03:27 beetle kernel: pcic: I/O win 0 flags 11 240-247 Feb 7 17:03:27 beetle kernel: ----- probe:Unknown, Just omit this chip.. XXX ---- Feb 7 17:03:27 beetle kernel: pcic: I/O win 0 flags 1 240-247 Feb 7 17:03:27 beetle pccardd[127]: Assigning I/O window 0, start 0x240, size 0x8 flags 0x1 Feb 7 17:03:27 beetle pccardd[127]: Assign sio-1, io 0x240-0x247, mem 0x0, 0 bytes, irq 3, flags 0 Feb 7 17:03:27 beetle pccardd[127]: driver allocation failed for 3COM(3CRWB60-A): Device not configured ============================8<======================================== Kill and start pccardd again and # tail -f /var/log/messages Feb 7 12:43:41 beetle pccardd[290]: Card "3COM"("3CRWB60-A") [Bluetooth PC Card] [(null)] matched "3COM" ("3CRWB60-A") [Bluetooth PC Card] [(null)] Feb 7 12:43:41 beetle pccardd[290]: Using I/O addr 0x240, size 8 Feb 7 12:43:41 beetle pccardd[290]: Setting config reg at offs 0x320 to 0x70, Reset time = 50 ms Feb 7 12:43:46 beetle kernel: pccard0: Assigning sio4: io 0x240-0x247 irq 3 mem 0x0-0xffffffff Feb 7 12:43:46 beetle kernel: pcic: I/O win 0 flags 11 240-247 Feb 7 12:43:46 beetle kernel: ----- probe:Unknown, Just omit this chip.. XXX ---- Feb 7 12:43:46 beetle kernel: pcic: I/O win 0 flags 1 240-247 Feb 7 12:43:46 beetle pccardd[290]: Assigning I/O window 0, start 0x240, size 0x8 flags 0x1 Feb 7 12:43:46 beetle pccardd[290]: Assign sio-1, io 0x240-0x247, mem 0x0, 0 bytes, irq 3, flags 0 Feb 7 12:43:46 beetle pccardd[290]: driver allocation failed for 3COM(3CRWB60-A): Device not configured Feb 7 12:43:46 beetle pccardd[290]: pccardd started Feb 7 12:44:55 beetle pccardd[290]: pccardd terminated: signal 2 received Feb 7 12:46:27 beetle su: max to root on /dev/ttyv2 Feb 7 12:46:34 beetle pccardd[317]: Card "3COM"("3CRWB60-A") [Bluetooth PC Card] [(null)] matched "3COM" ("3CRWB60-A") [Bluetooth PC Card] [(null)] Feb 7 12:46:34 beetle pccardd[317]: Using I/O addr 0x240, size 8 Feb 7 12:46:34 beetle pccardd[317]: Setting config reg at offs 0x320 to 0x70, Reset time = 50 ms Feb 7 12:46:39 beetle kernel: pccard0: Assigning sio4: io 0x240-0x247 irq 3 mem 0x0-0xffffffff Feb 7 12:46:39 beetle kernel: pcic: I/O win 0 flags 11 240-247 Feb 7 12:46:39 beetle kernel: pcic: I/O win 0 flags 1 240-247 Feb 7 12:46:39 beetle kernel: sio4 at port 0x240-0x247 irq 3 slot 0 on pccard0 Feb 7 12:46:40 beetle kernel: pcic: I/O win 0 flags 11 240-247 Feb 7 12:46:40 beetle kernel: sio4: type 8250 Feb 7 12:46:39 beetle pccardd[317]: Assigning I/O window 0, start 0x240, size 0x8 flags 0x1 Feb 7 12:46:39 beetle pccardd[317]: Assign sio-1, io 0x240-0x247, mem 0x0, 0 bytes, irq 3, flags 0 Feb 7 12:46:39 beetle pccardd[317]: sio4: 3COM (3CRWB60-A) inserted. Feb 7 12:46:39 beetle pccardd[317]: pccardd started ============================8<======================================== # pccardc dumpcis Code 128 not found Code 128 not found code Unknown ignored Configuration data for card in slot 0 Tuple #1, code = 0x1 (Common memory descriptor), length = 3 000: 00 00 ff Common memory device information: Device number 1, type No device, WPS = OFF Speed = No speed, Memory block size = 512b, 1 units Tuple #2, code = 0x15 (Version 1 info), length = 36 000: 05 00 33 43 4f 4d 00 33 43 52 57 42 36 30 2d 41 010: 00 42 6c 75 65 74 6f 6f 74 68 20 50 43 20 43 61 020: 72 64 00 ff Version = 5.0, Manuf = [3COM], card vers = [3CRWB60-A] Addit. info = [Bluetooth PC Card] Tuple #3, code = 0x20 (Manufacturer ID), length = 4 000: 01 01 40 00 PCMCIA ID = 0x101, OEM ID = 0x40 Tuple #4, code = 0x21 (Functional ID), length = 2 000: 02 01 Serial port/modem - POST initialize Tuple #5, code = 0x1a (Configuration map), length = 6 000: 05 30 20 03 17 00 Reg len = 2, config register addr = 0x320, last config = 0x30 Registers: XXX-X--- -------- Tuple #6, code = 0x1b (Configuration entry), length = 9 000: f0 41 18 a0 40 07 30 ff ff Config index = 0x30(default) Interface byte = 0x41 (I/O) +RDY/-BSY active Card provides address decode, 8 Bit I/O only I/O address # 1: block length = 0x8 IRQ modes: Level IRQs: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Tuple #7, code = 0x0 (Null tuple), length = 10 000: 02 01 40 00 2d 00 00 00 00 ff Tuple #8, code = 0x14 (No link), length = 0 Tuple #9, code = 0xff (Terminator), length = 0 2 slots found ============================8<======================================== # cat /etc/pccard.conf # 3Com 3CRWB60-A Bluetooth PC Card debuglevel 9 card "3COM" "3CRWB60-A" "Bluetooth PC Card" config auto "sio" ? --------------65BE0391DB117D63BB6EB3E9-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3C632EB3.978DDFA>