From owner-freebsd-current Thu May 9 04:56:21 1996 Return-Path: owner-current Received: (from root@localhost) by freefall.freebsd.org (8.7.3/8.7.3) id EAA27813 for current-outgoing; Thu, 9 May 1996 04:56:21 -0700 (PDT) Received: from mail.rwth-aachen.de (mail.RWTH-Aachen.DE [137.226.144.9]) by freefall.freebsd.org (8.7.3/8.7.3) with ESMTP id EAA27808 for ; Thu, 9 May 1996 04:56:15 -0700 (PDT) Received: from gilberto.physik.rwth-aachen.de (gilberto.physik.rwth-aachen.de) by mail.rwth-aachen.de (PMDF V5.0-4 #13110) id <01I4I2GVROU80006UP@mail.rwth-aachen.de> for freebsd-current@freefall.FreeBSD.org; Thu, 09 May 1996 12:17:06 +0100 Received: (from kuku@localhost) by gilberto.physik.rwth-aachen.de (8.6.11/8.6.9) id MAA19779 for freebsd-current@freefall.cdrom.com; Thu, 09 May 1996 12:24:07 +0200 Date: Thu, 09 May 1996 12:24:07 +0200 From: "Christoph P. Kukulies" Subject: -current kernel panics To: freebsd-current@freefall.FreeBSD.org Message-id: <199605091024.MAA19779@gilberto.physik.rwth-aachen.de> Content-transfer-encoding: 7BIT Sender: owner-current@FreeBSD.ORG X-Loop: FreeBSD.org Precedence: bulk root device to sd0a Assigned: TEI = 0xe7 = 115 syncing disks... done Rebooting... FreeBSD 2.2-CURRENT #0: Thu May 9 12:04:21 MET DST 1996 root@isdn-kukulies.dialup.rwth-aachen.de:/usr/src/sys/compile/MONK Calibrating clock(s) relative to mc146818A clock ... i8254 clock: 1193782 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency CPU: i486DX (486-class CPU) Origin = "AuthenticAMD" Id = 0x4e4 real memory = 33554432 (32768K bytes) avail memory = 30494720 (29780K bytes) Probing for devices on PCI bus 0: chip0 rev 4 on pci0:0 ncr0 rev 1 int a irq 9 on pci0:1 ncr0 waiting for scsi devices to settle (ncr0:0:0): "QUANTUM FIREBALL1080S 1Q09" type 0 fixed SCSI 2 sd0(ncr0:0:0): Direct-Access sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. 1042MB (2134305 512 byte sectors) (ncr0:1:0): "QUANTUM MAVERICK 540S 0901" type 0 fixed SCSI 2 sd1(ncr0:1:0): Direct-Access sd1(ncr0:1:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. 516MB (1057758 512 byte sectors) chip1 rev 3 on pci0:2 vga0 rev 0 on pci0:4 Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0 at 0x280-0x29f irq 5 maddr 0xd0000 msize 8192 on isa ed0: address 00:00:e8:80:79:9c, type WD8003E (8 bit) sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A qcam0 not found at 0x378 lpt1 at 0x378-0x37f irq 7 on isa lpt1: Interrupt-driven port lp1: TCP/IP capable interface fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa tel0 at 0xe80 irq 15 maddr 0xd8000 msize 4096 on isa npx0 on motherboard npx0: INT 16 interface gus0 at 0x220 irq 12 drq 1 flags 0x3 on isa gus0: changing root device to sd0a stray irq 2 ed0: NIC memory corrupt - invalid packet length 0 stray irq 10 Fatal double fault: eip = 0xf01c2707 esp = 0xefbfd000 ebp = 0xefbfd010 panic: double fault Automatic reboot in 15 seconds - press a key on the console to abort --> Press a key on the console to reboot <-- Rebooting... FreeBSD 2.2-CURRENT #0: Wed May 8 14:38:40 MET DST 1996 root@isdn-kukulies.dialup.rwth-aachen.de:/usr/src/sys/compile/MONK Calibrating clock(s) relative to mc146818A clock ... failed, using default i8254 clock of 1193182 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency CPU: i486DX (486-class CPU) Origin = "AuthenticAMD" Id = 0x4e4 real memory = 33554432 (32768K bytes) avail memory = 30498816 (29784K bytes) Probing for devices on PCI bus 0: chip0 rev 4 on pci0:0 ncr0 rev 1 int a irq 9 on pci0:1 ncr0 waiting for scsi devices to settle (ncr0:0:0): "QUANTUM FIREBALL1080S 1Q09" type 0 fixed SCSI 2 sd0(ncr0:0:0): Direct-Access sd0(ncr0:0:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. 1042MB (2134305 512 byte sectors) (ncr0:1:0): "QUANTUM MAVERICK 540S 0901" type 0 fixed SCSI 2 sd1(ncr0:1:0): Direct-Access sd1(ncr0:1:0): FAST SCSI-2 100ns (10 Mb/sec) offset 8. 516MB (1057758 512 byte sectors) chip1 rev 3 on pci0:2 vga0 rev 0 on pci0:4 Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> ed0 at 0x280-0x29f irq 5 maddr 0xd0000 msize 8192 on isa ed0: address 00:00:e8:80:79:9c, type WD8003E (8 bit) sio0 at 0x3f8-0x3ff irq 4 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A qcam0 not found at 0x378 lpt1 at 0x378-0x37f irq 7 on isa lpt1: Interrupt-driven port lp1: TCP/IP capable interface fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: NEC 72065B fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa tel0 at 0xe80 irq 15 maddr 0xd8000 msize 4096 on isa npx0 on motherboard npx0: INT 16 interface gus0 at 0x220 irq 12 drq 1 flags 0x3 on isa gus0: changing root device to sd0a Assigned: TEI = 0xeb = 117 The second dmesg log is the normal startup with the old kernel which is functioning. This is with a fresh sup. --Chris Christoph P. U. Kukulies kuku@gil.physik.rwth-aachen.de