Date: 08 Jan 2001 19:36:53 +0100 From: Dag-Erling Smorgrav <des@ofug.org> To: mobile@freebsd.org Subject: Laptop doesn't suspend properly Message-ID: <xzpy9wlhovu.fsf@flood.ping.uio.no>
next in thread | raw e-mail | index | archive | help
--=-=-=
After I upgraded my ThinkPad 600E from -STABLE to -CURRENT last month,
it no longer suspends properly. Closing the lid seemingly causes it to
suspend (the LEDs do their usual dance), but it only stays suspended
for one, maybe two seconds before resuming for no apparent reason.
I have the newest BIOS (INET31W); my dmesg is attached.
Does anyone have any idea what causes this behavior?
DES
--
Dag-Erling Smorgrav - des@ofug.org
--=-=-=
Content-Disposition: attachment; filename=aes.dmesg
Content-Description: dmesg
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Thu Dec 14 22:47:22 GMT 2000
root@aes.thinksec.com:/usr/src/sys/compile/AES
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (397.05-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x66a Stepping = 10
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134021120 (130880K bytes)
avail memory = 127676416 (124684K bytes)
Preloaded elf kernel "kernel" at 0xc02c0000.
Pentium Pro MTRR support enabled
Using $PIR table, 5 entries at 0xc00f9e20
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
vga_pci0: <VGA-compatible display device> mem 0x70400000-0x704fffff,0x70000000-0x703fffff,0xe0000000-0xe0ffffff irq 11 at device 0.0 on pci1
pcic-pci0: <TI PCI-1251 PCI-CardBus Bridge> mem 0x50102000-0x50102fff irq 11 at device 2.0 on pci0
pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC parallel isa irq]
pcic-pci1: <TI PCI-1251 PCI-CardBus Bridge> mem 0x50101000-0x50101fff irq 11 at device 2.1 on pci0
pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][CSC parallel isa irq]
pci0: <multimedia, audio> at 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfcf0-0xfcff at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, USB> at 7.2 (no driver attached)
pci0: <bridge, PCI-unknown> at 7.3 (no driver attached)
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
pcic0: <Intel i82365> at port 0x3e0-0x3e1 irq 10 on isa0
pcic0: management irq 10
pccard0: <PC Card bus -- kludge version> on pcic0
pccard1: <PC Card bus -- kludge version> on pcic0
pmtimer0 on isa0
ppc0: cannot reserve I/O port range
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
unknown: <PNP0303> can't assign resources
unknown: <IBM3780> can't assign resources
unknown: <PNP0700> can't assign resources
ppc1: <Standard parallel printer port> at port 0x3bc-0x3bf irq 7 on isa0
ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
unknown: <IBM3765> can't assign resources
unknown: <IBM0071> can't assign resources
unknown: <PNP0e03> can't assign resources
unknown: <PNP0680> can't assign resources
unknown: <PNP0680> can't assign resources
pccard: card inserted, slot 1
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master UDMA33
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2102> at ata1-master using WDMA2
Mounting root from ufs:/dev/ad0a
--=-=-=--
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?xzpy9wlhovu.fsf>