Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 01 Feb 2004 17:16:15 -1000
From:      al plant <webmaster@hawaiidakine.com>
To:        freebsd-questions@freebsd.org, ahwalker@rawbw.com, david.fleck@mchsi.com
Subject:   Solution to "Zip drive failed to install".
Message-ID:  <401DC0FF.6C908E7C@hawaiidakine.com>

next in thread | raw e-mail | index | archive | help
Solution to failed ZIP drive install

The BIOs setting was the fault.

I cleared it by disabling the BIOs internal motherboard settings and
installing a printer card that I set to run at IRQ 7  - 0278 .
This brought up the zip drive with no problem.

Then I removed the card and reset the internal motherboard back to IRQ 7
and 0378. 
This brought up the zip drive with no problem. I did set also the BIOs
to EPP.

 
My original problem.


> 
> I have a FreeBSD 4.4 box that works fine with Zip drives. I have
> another
> 4.4 that I can't get to configure the /zip drive.
> 
> I am now building another box using 4.9 and can't get the zip drive
> to
> work on it either.
> snd module installs and works fine BTW on all three boxes.
> 
> The error messages I get are /dev/da0s4  Device not configured.
> and trying to unload the kernel module to reload it gives the same
> message.
> 
> I am doing this vpo install  from old notes and I can't figure out
> what's causing the configuration failure. 
> I also tried entering  /etc/fstab parameters same as the other box
> that
> works.
> /dev/da0s4   /zip  msdos rw,noauto  0   0
>  
> Suggestions appreciated or point me clearer to a How To. I looked on
> the
> FreeBSD.org and that section is what I follow. 
> 
> Thanks.

-- 
Aloha! Al Plant - Webmaster http://hawaiidakine.com
Providing FAST DSL Service for $28.00 /mo. Member Small Business Hawaii.
Running FreeBSD 4.5 UNIX & Caldera Linux 2.4 & RedHat 7.2
Support OPEN SOURCE in Business Computing. Phone 808-622-0043



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?401DC0FF.6C908E7C>