From owner-freebsd-alpha Mon Mar 6 12: 4:46 2000 Delivered-To: freebsd-alpha@freebsd.org Received: from sable.cc.vt.edu (sable.cc.vt.edu [128.173.16.30]) by hub.freebsd.org (Postfix) with ESMTP id 8BEB837BBE8 for ; Mon, 6 Mar 2000 12:04:18 -0800 (PST) (envelope-from nmanisca@vt.edu) Received: from mail.vt.edu (gkar.cc.vt.edu [128.173.16.40]) by sable.cc.vt.edu (8.9.3/8.9.3) with ESMTP id PAA25365; Mon, 6 Mar 2000 15:04:10 -0500 (EST) Received: from dog ([198.82.106.223]) by gkar.cc.vt.edu (Sun Internet Mail Server sims.3.5.1999.05.24.18.28.p7) with SMTP id <0FR000I09NQX2Y@gkar.cc.vt.edu>; Mon, 6 Mar 2000 15:04:10 -0500 (EST) Date: Mon, 06 Mar 2000 15:03:24 -0500 From: nm Subject: LONG, WAS: No cigar with 3.9.18 :( X-Sender: nmanisca@mail.vt.edu (Unverified) To: Doug Rabson Cc: freebsd-alpha@freebsd.org Message-id: <3.0.32.20000306150323.036bc3e0@mail.vt.edu> MIME-version: 1.0 X-Mailer: Windows Eudora Pro Version 3.0 (32) Content-type: text/plain; charset=us-ascii Sender: owner-freebsd-alpha@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.org At 09:45 AM 3/6/00 +0000, Doug Rabson wrote: >Can I see the whole error log please. Ok, last nite I recompiled everything from scratch with -O0 just in case. No luck so far :( I have a PCI S3 Virge (86C325) with 4MB ram. At the end, is the log what I get when I run X (as a user, using startx). After the log of X messages, I appended the XFree86Config file. I noticed that I had moused running so I killed it before starting X. X eventually comes up to a graphical screen, but there is some distortion and it is definately not right. Also the mouse sticks to the left and top edges of the screen. I killed the server via ctrl+alt+del and the screen returned to text mode. However Only every other character is viewable and there are short horizontal flickering lines across the screen. I configured X via xf86config. Is there any other information that would be helpful? Nick Maniscalco XFree86 Version 3.9.18 / X Window System (protocol Version 11, revision 0, vendor release 6400) Release Date: 21 February 2000 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: FreeBSD 4.0-20000214-CURRENT alpha [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Mon Mar 6 14:54:24 2000 (==) Using config file: "/etc/X11/XF86Config" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (??) unknown. (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "My Monitor" (**) | |-->Device "S3 86C325 (generic)" Layout "Simple Layout" Screen: "Screen 1" (0): 0 0 (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (**) XKB: rules: "xfree86" (**) XKB: model: "pc101" (**) XKB: layout: "us" (**) FontPath set to "/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/l ib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/ X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X 11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) Using syscons driver with X support (version 16777218.0) (--) using VT number 9 (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 3.9.18, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 3.9.18, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 3.9.18, module version = 0.1.0 (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (--) PCI:*(0:13:0) S3 ViRGE rev 6, Mem @ 0x84000000/26 (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 3.9.18, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 3.9.18, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 3.9.18, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 3.9.18, module version = 1.1.7 (II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o (II) Module s3virge: vendor="The XFree86 Project" compiled for 3.9.18, module version = 0.11.0 (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 3.9.18, module version = 1.0.0 (II) S3VIRGE: driver (version 0.11.0) for S3 ViRGE chipsets: virge, 86C325, virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2, 86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365, trio 3d/2x, 86C362, 86C368 setting up ISA: -1 setting up HOST: 0 pciIo_MemAccessDisable: 0x06800 S3VIRGE instances found: 1 (--) Assigning device section with no busID to primary device S3VIRGE instances found: 1 (--) Chipset virge found S3VIRGE: card at 0:13:0 is claimed by a Device section xf86AllocateScreen - xf86Screens[0]->pScreen = 0x0 Enable access 0 pciSetBusAccess: route VGA to bus 0 pciIo_MemAccessEnable: 0x06800 (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 3.9.18, module version = 0.1.0 (**) S3VIRGE(0): Depth 8, (--) framebuffer bpp 8 (==) S3VIRGE(0): Default visual is PseudoColor (==) S3VIRGE(0): Using HW Cursor (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 3.9.18, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 3.9.18, module version = 1.0.0 (II) S3VIRGE(0): initializing int10 (II) Machine needs sparse mapping pciIo_MemAccessDisable: 0x06800 pciIo_MemAccessDisable: 0x06800 pciIo_MemAccessEnable: 0x06800 pciIo_MemAccessEnable: 0x06800 pciIo_MemAccessDisable: 0x06800 pciIo_MemAccessDisable: 0x06800 pciIo_MemAccessEnable: 0x06800 pciIo_MemAccessEnable: 0x06800 (II) S3VIRGE(0): VESA Bios detected (--) S3VIRGE(0): Chipset: "virge" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 3.9.18, module version = 1.0.0 (--) S3VIRGE(0): No DDC signal xf86SetXDDCprop(0x12060a810, 0x0) (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="The XFree86 Project" compiled for 3.9.18, module version = 1.2.0 (II) S3VIRGE(0): I2C bus "I2C bus" initialized. (II) S3VIRGE(0): I2C device "I2C bus:ddc2" registered. (II) S3VIRGE(0): I2C device "I2C bus:ddc2" removed. xf86SetXDDCprop(0x12060a810, 0x0) (==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0) (--) S3VIRGE(0): videoram: 2048k (--) S3VIRGE(0): Detected current MCLK value of 50.114 MHz (II) S3VIRGE(0): clock range: 20.00 to 270.00 MHz (WW) S3VIRGE(0): Mode "800x600" deleted (hsync out of range) (WW) S3VIRGE(0): Mode "1024x768" deleted (hsync out of range) (WW) S3VIRGE(0): Mode "1024x768" deleted (hsync out of range) (WW) S3VIRGE(0): Mode "1024x768" deleted (hsync out of range) (WW) S3VIRGE(0): Mode "1152x864" deleted (hsync out of range) (WW) S3VIRGE(0): Mode "1280x960" deleted (hsync out of range) (WW) S3VIRGE(0): Mode "1280x960" deleted (hsync out of range) (WW) S3VIRGE(0): Mode "1280x1024" deleted (hsync out of range) (WW) S3VIRGE(0): Mode "1280x1024" deleted (hsync out of range) (WW) S3VIRGE(0): Mode "1280x1024" deleted (hsync out of range) (WW) S3VIRGE(0): Mode "1600x1200" deleted (horizontal timing out of range) (WW) S3VIRGE(0): Mode "1600x1200" deleted (horizontal timing out of range) (WW) S3VIRGE(0): Mode "1600x1200" deleted (horizontal timing out of range) (WW) S3VIRGE(0): Mode "1600x1200" deleted (horizontal timing out of range) (WW) S3VIRGE(0): Mode "1600x1200" deleted (horizontal timing out of range) (WW) S3VIRGE(0): Mode "1792x1344" deleted (insufficient memory for mode) (WW) S3VIRGE(0): Mode "1792x1344" deleted (insufficient memory for mode) (WW) S3VIRGE(0): Mode "1856x1392" deleted (insufficient memory for mode) (WW) S3VIRGE(0): Mode "1856x1392" deleted (insufficient memory for mode) (WW) S3VIRGE(0): Mode "1920x1440" deleted (insufficient memory for mode) (WW) S3VIRGE(0): Mode "1920x1440" deleted (insufficient memory for mode) (WW) S3VIRGE(0): Mode "1280x1024" deleted (no mode of this name) (--) S3VIRGE(0): Virtual size is 1024x768 (pitch 1024) (**) S3VIRGE(0): Default mode "640x480": 36.0 MHz, 43.3 kHz, 85.0 Hz (**) S3VIRGE(0): Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz (**) S3VIRGE(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz (==) S3VIRGE(0): DPI set to (75, 75) (II) Loading /usr/X11R6/lib/modules/libcfb.a (II) Module cfb: vendor="The XFree86 Project" compiled for 3.9.18, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libmfb.a (II) Module mfb: vendor="The XFree86 Project" compiled for 3.9.18, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 3.9.18, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 3.9.18, module version = 0.1.0 Symbol VErrorF from module /usr/X11R6/lib/modules/libint10.a is unresolved! Symbol VErrorF from module /usr/X11R6/lib/modules/libint10.a is unresolved! Symbol strlen from module /usr/X11R6/lib/modules/libddc.a is unresolved! Symbol strlen from module /usr/X11R6/lib/modules/libddc.a is unresolved! Symbol strlen from module /usr/X11R6/lib/modules/libddc.a is unresolved! Symbol strlen from module /usr/X11R6/lib/modules/libddc.a is unresolved! do I need RAC? No, I don't. Enable access 0 (II) S3VIRGE(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Solid Horizontal and Vertical Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 10 256x256 slots InitOutput - xf86Screens[0]->pScreen = 0x120984010 xf86Screens[0]->pScreen->CreateWindow = 0x12075f000 PostScreenInit generation: 1 Entering OPERATING state Enable access 0 (**) Mouse1: Protocol: "MouseMan" (**) Mouse1: Core Pointer (==) Mouse1: Buttons: 3 (II) Keyboard "Keyboard1" handled by legacy driver (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE) (WW) fcntl(8, F_SETOWN): Inappropriate ioctl for device Removing /usr/X11R6/lib/X11/fonts/Speedo/ from the valid list of fontpaths xf86CreateRootWindow(0x120342128) xf86CreateRootWindow() returns 1 [FVWM][Read]: <> file '.fvwm2rc' not found in $HOME or /usr/X11R6/etc [FVWM][Read]: trying to read system rc file [FVWM][Read]: <> file 'system.fvwm2rc' not found in $HOME or /usr/X11R6/etc Entering SETUP state Enable access 0 Entering OPERATING state Enable access 0 Entering SETUP state Enable access 0 Entering OPERATING state Enable access 0 xinit: connection to X server lost. waiting for X server to shut down ---------------------------------------------------------------------------- ---- ---------------------------------------------------------------------------- ---- XF86Config # File generated by xf86config. # # Copyright (c) 1999 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # # ********************************************************************** # Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** # ********************************************************************** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ********************************************************************** # Section "Module" # This loads the DBE extension module. Load "dbe" # Double buffer extension # This loads the miscellaneous extensions module, and disables # initialisation of the XFree86-DGA extension within that module. SubSection "extmod" Option "omit xfree86-dga" # don't initialise the DGA extension EndSubSection # This loads the Type1 and FreeType font modules Load "type1" Load "freetype" # This loads the GLX module # Load "glx" EndSection # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files" # The location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. RgbPath "/usr/X11R6/lib/X11/rgb" # Multiple FontPath entries are allowed (which are concatenated together), # as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath "/usr/X11R6/lib/X11/fonts/local/" FontPath "/usr/X11R6/lib/X11/fonts/misc/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" # The module search path. The default path is shown here. # ModulePath "/usr/X11R6/lib/modules" EndSection # ********************************************************************** # Server flags section. # ********************************************************************** Section "ServerFlags" # Uncomment this to cause a core dump at the spot where a signal is # received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # Option "NoTrapSignals" # Uncomment this to disable the server abort sequence # This allows clients to receive this key event. # Option "DontZap" # Uncomment this to disable the / mode switching # sequences. This allows clients to receive these key events. # Option "Dont Zoom" # Uncomment this to disable tuning with the xvidtune client. With # it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error. # Option "DisableVidModeExtension" # Uncomment this to enable the use of a non-local xvidtune client. # Option "AllowNonLocalXvidtune" # Uncomment this to disable dynamically modifying the input device # (mouse and keyboard) settings. # Option "DisableModInDev" # Uncomment this to enable the use of a non-local client to # change the keyboard or mouse settings (currently only xset). # Option "AllowNonLocalModInDev" EndSection # ********************************************************************** # Input devices # ********************************************************************** # ********************************************************************** # Core keyboard's InputDevice section # ********************************************************************** Section "InputDevice" Identifier "Keyboard1" Driver "Keyboard" # For most OSs the protocol can be omitted (it defaults to "Standard"). # When using XQUEUE (only for SVR3 and SVR4, but not Solaris), # uncomment the following line. # Option "Protocol" "Xqueue" Option "AutoRepeat" "500 30" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # Option "LeftAlt" "Meta" # Option "RightAlt" "ModeShift" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # These are the default XKB settings for XFree86 # Option "XkbRules" "xfree86" # Option "XkbModel" "pc101" # Option "XkbLayout" "us" # Option "XkbVariant" "" # Option "XkbOptions" "" # Option "XkbDisable" Option "XkbRules" "xfree86" Option "XkbModel" "pc101" Option "XkbLayout" "us" EndSection # ********************************************************************** # Core Pointer's InputDevice section # ********************************************************************** Section "InputDevice" # Identifier and driver Identifier "Mouse1" Driver "mouse" Option "Protocol" "MouseMan" Option "Device" "/dev/psm0" # When using XQUEUE, comment out the above two lines, and uncomment # the following line. # Option "Protocol" "Xqueue" # Baudrate and SampleRate are only for some Logitech mice. In # almost every case these lines should be omitted. # Option "BaudRate" "9600" # Option "SampleRate" "150" # Emulate3Buttons is an option for 2-button Microsoft mice # Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Option "Emulate3Buttons" # Option "Emulate3Timeout" "50" # ChordMiddle is an option for some 3-button Logitech mice # Option "ChordMiddle" EndSection # ********************************************************************** # Other input device sections # this is optional and is required only if you # are using extended input devices. This is for example only. Refer # to the XF86Config man page for a description of the options. # ********************************************************************** # # Section "InputDevice" # Identifier "Mouse2" # Driver "mouse" # Option "Protocol" "MouseMan" # Option "Device" "/dev/mouse2" # EndSection # # Section "InputDevice" # Identifier "spaceball" # Driver "magellan" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "spaceball2" # Driver "spaceorb" # Option "Device" "/dev/cua0" # EndSection # # Section "InputDevice" # Identifier "touchscreen0" # Driver "microtouch" # Option "Device" "/dev/ttyS0" # Option "MinX" "1412" # Option "MaxX" "15184" # Option "MinY" "15372" # Option "MaxY" "1230" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # # Section "InputDevice" # Identifier "touchscreen1" # Driver "elo2300" # Option "Device" "/dev/ttyS0" # Option "MinX" "231" # Option "MaxX" "3868" # Option "MinY" "3858" # Option "MaxY" "272" # Option "ScreenNumber" "0" # Option "ReportingMode" "Scaled" # Option "ButtonThreshold" "17" # Option "ButtonNumber" "1" # Option "SendCoreEvents" # EndSection # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present Section "Monitor" Identifier "My Monitor" # HorizSync is in kHz unless units are specified. # HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 31.5 - 48.5 # HorizSync 30-64 # multisync # HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified. # VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 50-90 EndSection # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # Standard VGA Device: Section "Device" Identifier "Standard VGA" VendorName "Unknown" BoardName "Unknown" # The chipset line is optional in most cases. It can be used to override # the driver's chipset detection, and should not normally be specified. # Chipset "generic" # The Driver line must be present. When using run-time loadable driver # modules, this line instructs the server to load the specified driver # module. Even when not using loadable driver modules, this line # indicates which driver should interpret the information in this section. Driver "vga" # The BusID line is used to specify which of possibly multiple devices # this section is intended for. When this line isn't present, a device # section can only match up with the primary video device. For PCI # devices a line like the following could be used. This line should not # normally be included unless there is more than one video device # intalled. # BusID "PCI:0:10:0" # VideoRam 256 # Clocks 25.2 28.3 EndSection # Device configured by xf86config: Section "Device" Identifier "S3 86C325 (generic)" Driver "s3virge" #VideoRam 4096 #Option "xaa_benchmark" #Option "fifo_moderate" #Option "pci_burst_on" #Option "pci_retry" # Insert Clocks lines here if appropriate EndSection # ********************************************************************** # Screen sections # ********************************************************************** # Any number of screen sections may be present. Each describes # the configuration of a single screen. A single specific screen section # may be specified from the X server command line with the "-screen" # option. Section "Screen" Identifier "Screen 1" Device "S3 86C325 (generic)" Monitor "My Monitor" DefaultDepth 8 Subsection "Display" Depth 8 Modes "640x480" "800x600" "1024x768" "1280x1024" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "640x480" "800x600" "1024x768" "1280x1024" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "640x480" "800x600" "1024x768" "1280x1024" ViewPort 0 0 EndSubsection EndSection # ********************************************************************** # ServerLayout sections. # ********************************************************************** # Any number of ServerLayout sections may be present. Each describes # the way multiple screens are organised. A specific ServerLayout # section may be specified from the X server command line with the # "-layout" option. In the absence of this, the first section is used. # When now ServerLayout section is present, the first Screen section # is used alone. Section "ServerLayout" # The Identifier line must be present Identifier "Simple Layout" # Each Screen line specifies a Screen section name, and optionally # the relative position of other screens. The four names after # primary screen name are the screens to the top, bottom, left and right # of the primary screen. In this example, screen 2 is located to the # right of screen 1. Screen "Screen 1" # Each InputDevice line specifies an InputDevice section name and # optionally some options to specify the way the device is to be # used. Those options include "CorePointer", "CoreKeyboard" and # "SendCoreEvents". InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-alpha" in the body of the message