From owner-freebsd-questions Thu Apr 8 8:34:33 1999 Delivered-To: freebsd-questions@freebsd.org Received: from mb06.swip.net (mb06.swip.net [193.12.122.210]) by hub.freebsd.org (Postfix) with ESMTP id 9CE3715A37 for ; Thu, 8 Apr 1999 08:34:21 -0700 (PDT) (envelope-from balrog@swipnet.se) Received: from swipnet.se (dialup150-3-32.swipnet.se [130.244.150.160]) by mb06.swip.net (8.8.8/8.8.8) with ESMTP id RAA16548 for ; Thu, 8 Apr 1999 17:32:17 +0200 (MET DST) Message-ID: <370CCABE.2D702862@swipnet.se> Date: Thu, 08 Apr 1999 17:26:55 +0200 From: Johan =?iso-8859-1?Q?M=E5rtensson?= X-Mailer: Mozilla 4.5 [en] (X11; I; FreeBSD 2.2.8-RELEASE i386) X-Accept-Language: en MIME-Version: 1.0 To: freebsd-questions@FreeBSD.ORG Subject: Re: SB16 problems References: <370CC090.75A4F1CC@swipnet.se> Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Johan Mårtensson wrote: > I've tried too configure my kernel to make use of my sb16 (not pnp), but > I can't seem to get it to work. > > I'll send along my /usr/src/sys/i386/conf/ANGRENOST file... > > ps. I've done /dev/MAKEDEV snd0 , so that's not the problem > > ------------------------------------------------------------------------ > # > # ANGRENOST -- My SuperDuperNinja configuration file! > # > # For more information read the handbook part System Administration -> > # Configuring the FreeBSD Kernel -> The Configuration File. > # The handbook is available in /usr/share/doc/handbook or online as > # latest version from the FreeBSD World Wide Web server > # > # > # An exhaustive list of options and more detailed explanations of the > # device lines is present in the ./LINT configuration file. If you are > # in doubt as to the purpose or necessity of a line, check first in LINT. > # > # $Id: GENERIC,v 1.77.2.28 1998/09/26 17:36:14 wpaul Exp $ > > machine "i386" > cpu "I586_CPU" > ident ANGRENOST > maxusers 8 > > #options MATH_EMULATE #Support for x87 emulation > options INET #InterNETworking > options FFS #Berkeley Fast Filesystem > #options NFS #Network Filesystem > #options MSDOSFS #MSDOS Filesystem > options "CD9660" #ISO 9660 Filesystem > options PROCFS #Process filesystem > options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] > options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device > options BOUNCE_BUFFERS #include support for DMA bounce buffers > options UCONSOLE #Allow users to grab the console > options FAILSAFE #Be conservative > options USERCONFIG #boot -c editor > options VISUAL_USERCONFIG #visual boot -c editor > > config kernel root on sd0 > > controller isa0 > controller eisa0 > controller pci0 > > controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr > disk fd0 at fdc0 drive 0 > #disk fd1 at fdc0 drive 1 > # Unless you know very well what you're doing, leave ft0 at drive 2, or > # remove the line entirely if you don't need it. Trying to configure > # it on another unit might cause surprises, see PR kern/7176. > #tape ft0 at fdc0 drive 2 > > #options "CMD640" # work around CMD640 chip deficiency > #controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr > #disk wd0 at wdc0 drive 0 > #disk wd1 at wdc0 drive 1 > > #controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr > #disk wd2 at wdc1 drive 0 > #disk wd3 at wdc1 drive 1 > > #options ATAPI #Enable ATAPI support for IDE bus > #options ATAPI_STATIC #Don't do it as an LKM > #device wcd0 #IDE CD-ROM > #device wfd0 #IDE floppy (LS-120) > > # A single entry for any of these controllers (ncr, ahb, ahc, amd) is > # sufficient for any number of installed devices. > > #controller ncr0 > controller amd0 > #controller ahb0 > #controller ahc0 > #controller dpt0 > #controller bt0 at isa? port "IO_BT0" bio irq ? vector bt_isa_intr > #controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr > #controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr > #controller aic0 at isa? port 0x340 bio irq 11 vector aicintr > #controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr > #controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr > #controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr > > options DPT_MEASURE_PERFORMANCE # Required by DPT driver?? > #options DPT_VERIFY_HINTR # Some hardware must have it! > #options DPT_TRACK_CCB_STATES # Some hardware must have it! > #options DPT_HANDLE_TIMEOUTS # Some hardware must have it! > #options DPT_TIMEOUT_FACTOR=4 # Some hardware needs more > > controller scbus0 > > device worm0 at scbus? #scsi worm > > device sd0 > > device od0 #See LINT for possible `od' options. > > device st0 > > device cd0 #Only need one of these, the code dynamically grows > > #device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr > #device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr > > #controller matcd0 at isa? port 0x230 bio > > device scd0 at isa? port 0x230 bio > > # syscons is the default console driver, resembling an SCO console > device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr > # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver > #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint > options XSERVER # support for X server > #options FAT_CURSOR # start with block cursor > # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines > #options PCVT_SCANSET=2 # IBM keyboards are non-std > > # Mandatory, don't remove > device npx0 at isa? port "IO_NPX" flags 0x1 irq 13 vector npxintr > > # > # Laptop support (see LINT for more options) > # > device apm0 at isa? disable # Advanced Power Management > options APM_BROKEN_STATCLOCK # Workaround some buggy APM BIOS > # PCCARD (PCMCIA) support > #controller card0 > #device pcic0 at card? > #device pcic1 at card? > > device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr > device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr > device sio2 at isa? disable port "IO_COM3" tty irq 5 vector siointr > device sio3 at isa? disable port "IO_COM4" tty irq 9 vector siointr > > device lpt0 at isa? port? tty irq 7 vector lptintr > #device lpt1 at isa? port? tty > #device mse0 at isa? port 0x23c tty irq 5 vector mseintr > > device psm0 at isa? port "IO_KBD" conflicts tty irq 12 vector psmintr > > # Order is important here due to intrusive probes, do *not* alphabetize > # this list of network interfaces until the probes have been fixed. > # Right now it appears that the ie0 must be probed before ep0. See > # revision 1.20 of this file. > #device de0 > #device fxp0 > #device tl0 > #device tx0 > #device vx0 > #device xl0 > > device ed0 at isa? port 0x280 net irq 10 iomem 0xd8000 vector edintr > #device ie0 at isa? port 0x300 net irq 10 iomem 0xd0000 vector ieintr > #device ep0 at isa? port 0x300 net irq 10 vector epintr > #device ex0 at isa? port? net irq? vector exintr > #device fe0 at isa? port 0x300 net irq ? vector feintr > #device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr > #device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr > #device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr > #device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr > #device cs0 at isa? disable port 0x300 net irq ? vector csintr > > pseudo-device loop > pseudo-device ether > pseudo-device log > pseudo-device sl 1 > pseudo-device ppp 1 > pseudo-device vn 1 > pseudo-device tun 1 > pseudo-device pty 16 > pseudo-device gzip # Exec gzipped a.out's > > # KTRACE enables the system-call tracing facility ktrace(2). > # This adds 4 KB bloat to your kernel, and slightly increases > # the costs of each syscall. > options KTRACE #kernel tracing > > # This provides support for System V shared memory. > # > options SYSVSHM > > controller snd0 > device sb0 at isa? port 0x220 irq 7 conflicts drq 1 vector sbintr > device sbxvi0 at isa? drq 5 > device sbmidi0 at isa? port 0x330 To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message