Date: Tue, 9 Mar 2004 17:21:37 +0100 From: "Manuel Trujillo" <toomany@toomany.net> To: "FreeBSD gnats submit" <FreeBSD-gnats-submit@FreeBSD.org> Subject: i386/63992: XFree86 4.3 don't start Message-ID: <1078849297.0@bu.datagrama.net> Resent-Message-ID: <200403091630.i29GUKKs028602@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
>Number: 63992 >Category: i386 >Synopsis: XFree86 4.3 don't start >Confidential: no >Severity: serious >Priority: high >Responsible: freebsd-i386 >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Tue Mar 09 08:30:19 PST 2004 >Closed-Date: >Last-Modified: >Originator: Manuel Trujillo >Release: FreeBSD 5.2.1-RELEASE-p1 i386 >Organization: TooManySecrets HeadQuarters >Environment: System: FreeBSD 5.2.1-RELEASE-p1 #2: Tue Mar 9 13:41:23 CET 2004 root@bu.datagrama.net:/usr/obj/usr/src/sys/BU DMESG Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE-p1 #2: Tue Mar 9 13:41:23 CET 2004 root@bu.datagrama.net:/usr/obj/usr/src/sys/BU Preloaded elf kernel "/boot/kernel/kernel" at 0xc0ade000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0ade1f4. Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel Pentium III (896.68-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x68a Stepping = 10 Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE> real memory = 268369920 (255 MB) avail memory = 251047936 (239 MB) Pentium Pro MTRR support enabled VESA: v2.0, 8192k memory, flags:0x1, mode table:0xc09b0d02 (1000022) VESA: ATI MOBILE M3 npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <PTLTD RSDT > on motherboard pcibios: BIOS version 2.10 Using $PIR table, 11 entries at 0xc00fdee0 acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 pcib0: slot 2 INTA is routed to irq 11 pcib0: slot 2 INTB is routed to irq 11 pcib0: slot 3 INTA is routed to irq 11 pcib0: slot 3 INTA is routed to irq 11 pcib0: slot 5 INTA is routed to irq 11 pcib0: slot 7 INTD is routed to irq 11 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf4000000-0xf7ffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pcib1: slot 0 INTA is routed to irq 11 pci1: <display, VGA> at device 0.0 (no driver attached) cbb0: <TI1450 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 2.0 on pci0 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 cbb0: [MPSAFE] cbb1: <TI1450 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11 at device 2.1 on pci0 cardbus1: <CardBus bus> on cbb1 pccard1: <16-bit PCCard bus> on cbb1 cbb1: [MPSAFE] fxp0: <Intel 82550 Pro/100 Ethernet> port 0x1800-0x183f mem 0xf0100000-0xf011ffff,0xf0120000-0xf0120fff irq 11 at device 3.0 on pci0 fxp0: Ethernet address 00:03:47:8c:40:15 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci0: <simple comms, UART> at device 3.1 (no driver attached) csa0: <CS4280/CS4614/CS4622/CS4624/CS4630> mem 0xf0000000-0xf00fffff,0xf0122000-0xf0122fff irq 11 at device 5.0 on pci0 csa: card is Thinkpad 600X/A20/T20 pcm0: <CS461x PCM Audio> on csa0 pcm0: <Cirrus Logic CS4297A AC97 Codec> isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 UDMA33 controller> port 0x1850-0x185f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1860-0x187f irq 11 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: vendor 0x062a product 0x0001, rev 1.10/0.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 0 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio1 port 0x2f8-0x2ff irq 3 drq 3 on acpi0 sio1: type 16550A acpi_ec0: <Embedded Controller: GPE 0x9, GLK> port 0x66,0x62 on acpi0 acpi_cmbat0: <Control Method Battery> on acpi0 acpi_cmbat1: <Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xd0000-0xd17ff,0xc0000-0xcffff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 896680157 Hz quality 800 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% ath0: <Atheros 5212> mem 0x88000000-0x8800ffff irq 11 at device 0.0 on cardbus1 ath0: mac 5.6 phy 4.1 5ghz radio 4.5 ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 802.11 address: 00:09:5b:92:ef:3c GEOM: create disk ad0 dp=0xc2dd5d60 ad0: 19077MB <HITACHI_DK23BA-20B> [41344/15/63] at ata0-master UDMA33 acd0: DVDROM <MATSHITADVD-ROM SR-8175> at ata1-master PIO4 GEOM: create disk cd0 dp=0xc2da1e00 cd0 at ata1 bus 0 target 0 lun 0 cd0: <MATSHITA DVD-ROM SR-8175 G228> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, XFREE86_log VGA == Rage Mobility M3 AGP 2x using driver "ati" VGA recognized like Rage Mobility M3 LF AGP >Description: when I try to startx like a "normal" user, the machine, an IBM ThinkPad a22m, frozze the machine totally. Like user "root", only happened sometimes. I change the /etc/fbtab and descomment the line about "console". One time, like normal user, I obtained good results (can startx), but another times doesn't. >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted:
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1078849297.0>