Date: Tue, 21 Aug 2007 11:44:43 +0200 From: Remy Nonnenmacher <remy.nonnenmacher@activnetworks.com> To: Lawrence Farr <bsd-current@epcdirect.co.uk> Cc: freebsd-current@freebsd.org Subject: Re: Solid hang with bge interface Message-ID: <46CAB40B.6030605@activnetworks.com> In-Reply-To: <012501c7e348$288c6af0$79a540d0$@co.uk> References: <46C9B99C.1060403@moneybookers.com> <012501c7e348$288c6af0$79a540d0$@co.uk>
next in thread | previous in thread | raw e-mail | index | archive | help
Lawrence Farr wrote: > I have a Supermicro H8DAR-T based server, that was happily > running 6-stable from last year sometime. I swapped it out and > have been trying to get -CURRENT installed on it but it hangs > solid as soon as you configure the bge0 interface. The bge1 > interface will work occasionally tho. To try and rule out a > hardware fault I booted an AMD64-6.0RC1 cd that I had, which > had no problems at all with the interface: > > http://www.epcdirect.com/bootlog/6boot.txt > > But the current snapshot from June, and from todays source > hangs solid as soon as you try to set up the bge0 interface. > > http://www.epcdirect.com/bootlog/currentboot.txt > > As you can see, it hangs solid at "Setting hostname". > > I've also removed the 3ware card "just in case" but it made > no difference. Latest BIOS too. I found some references to > a similar problem with bge recently too: > > http://lists.freebsd.org/pipermail/freebsd-current/2007-August/075998.html > > > Anyone else seeing this? > Same here with a Supermicro H8SSL-I2 (Serverworks HT1000 based). bge0 locks the system hard when going up, bge1 OK (but goes down a few hours after start). Also, an ifconfig indicates: bge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether 00:30:48:5e:6e:56 media: Ethernet autoselect (none <hw-loopback>) ^^^^^^^^^^^^^^^^^^ status: no carrier bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=9b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM> ether 00:30:48:5e:6e:57 inet 192.168.1.49 netmask 0xffffff00 broadcast 192.168.1.255 media: Ethernet autoselect (1000baseTX <full-duplex>) status: active An the dmesg shows: (see "^^^^..") . . bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x2100> mem 0xff4f0000-0xff4fffff irq 24 at device 3.0 on pci2 miibus0: <MII bus> on bge0 brgphy0: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: Ethernet address: 00:30:48:5e:6e:56 bge0: [ITHREAD] pci2:3:1: bad VPD cksum, remain 14 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x2100> mem 0xff4e0000-0xff4effff irq 25 at device 3.1 on pci2 miibus1: <MII bus> on bge1 brgphy1: <BCM5704 10/100/1000baseTX PHY> PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge1: Ethernet address: 00:30:48:5e:6e:57 bge1: [ITHREAD] . . (I also have strange problems with the SATA controller and recent kernels (that works fine on other machines) that seems to read random sectors (at least not those requested) causing core-dumps, compiler internal errors, trashed sources and false positives about corrupted filesystems.I don't know what is going on on this platform but it smells^Gdoesn't looks very sane.) RN. IeM
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?46CAB40B.6030605>