From owner-freebsd-net@FreeBSD.ORG Tue Mar 29 00:47:57 2005 Return-Path: Delivered-To: freebsd-net@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 24D5E16A4CE for ; Tue, 29 Mar 2005 00:47:57 +0000 (GMT) Received: from mail.vicor-nb.com (bigwoop.vicor-nb.com [208.206.78.2]) by mx1.FreeBSD.org (Postfix) with ESMTP id C042443D46 for ; Tue, 29 Mar 2005 00:47:56 +0000 (GMT) (envelope-from julian@elischer.org) Received: from [208.206.78.97] (julian.vicor-nb.com [208.206.78.97]) by mail.vicor-nb.com (Postfix) with ESMTP id 09B677A41E; Mon, 28 Mar 2005 16:47:56 -0800 (PST) Message-ID: <4248A5BB.3040508@elischer.org> Date: Mon, 28 Mar 2005 16:47:55 -0800 From: Julian Elischer User-Agent: Mozilla/5.0 (X11; U; FreeBSD i386; en-US; rv:1.7.5) Gecko/20050218 X-Accept-Language: en, hu MIME-Version: 1.0 To: John Mok References: <42344AF7.6070701@attglobal.net> <423C72A1.7060000@cronyx.ru> <4240497D.5030304@attglobal.net> <42404B15.5040605@elischer.org> <424835C0.9070603@attglobal.net> <42485836.6030203@elischer.org> <424898E3.8080007@attglobal.net> In-Reply-To: <424898E3.8080007@attglobal.net> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit cc: freebsd-net@freebsd.org Subject: Re: HOWTO connect MCI using Netgraph + Frame Relay with Digi SYNC/570i X-BeenThere: freebsd-net@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Networking and TCP/IP with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 29 Mar 2005 00:47:57 -0000 John Mok wrote: > > The command "ngctl types" shows :- > > There are 5 total types: > Type name Number of living nodes > --------- ---------------------- > socket 1 > rfc1490 0 > lmi 0 > frame_relay 0 > sync_ar 2 > > What other modules are needed? How to add them, whether load them > dynamically or compiled into kernel? > > Thanks a lot. kldload ng_iface at least it should be loaded automatically if you add the line shown below.. > > John Mok > > > Julian Elischer wrote: > >> what does >> "ngctl types" >> say? >> >> looks like you don't have all the right modules loaded.. >> >> >> John Mok wrote: >> >>> >>> After issuing the following commands :- >>> >>> #ngctl mkpeer sync_ar0: frame_relay rawdata downstream >> ngctl name sync_ar0:rawdata fr-mux replace the next line with.. #ngctl mkpeer fr-mux: lmi dlci0 ansi and add: ngctl name fr-mux:dlci0 lmi >>> #ngctl mkpeer sync_ar0:rawdata rfc1490 dlci16 rfc1490 >> this could be replaved by: ngctl mkpeer fr-mux: rfc1490 dlci16 downstream >>> #ngctl mkpeer sync_ar0:rawdata dlci16 rl0 inet inet >> this line is totally confused.. should be: ngctl name fr-mux:dlci16 protomux ngctl mkpeer protomux: iface inet inet now you can add the ip addresses.. sorry I didn't read it better several days ago.. >>> >>> #ifconfig ng0 1.2.3.4 5.6.7.8 >>> ifconfig: interface ng0 does not exist >> >> >> >> >> >> are you SURE none of these returned an error? >> >>> >>> The command ifconfig shows :- >>> >>> rl0: flags=8843 mtu 1500 >>> options=8 >>> inet6 fe80::207:40ff:fe09:f09%rl0 prefixlen 64 scopeid 0x1 >>> inet 192.168.255.254 netmask 0xffffff00 broadcast 192.168.255.255 >>> ether 00:07:40:09:0f:09 >>> media: Ethernet autoselect (none) >>> status: no carrier >>> xl0: flags=8843 mtu 1500 >>> options=9 >>> inet6 fe80::201:3ff:fec1:9c58%xl0 prefixlen 64 scopeid 0x2 >>> ether 00:01:03:c1:9c:58 >>> media: Ethernet autoselect (100baseTX ) >>> status: active >>> xl1: flags=8843 mtu 1500 >>> options=9 >>> inet6 fe80::201:3ff:fe34:61af%xl1 prefixlen 64 scopeid 0x3 >>> inet 192.168.16.254 netmask 0xffffff00 broadcast 192.168.16.255 >>> ether 00:01:03:34:61:af >>> media: Ethernet autoselect (100baseTX ) >>> status: active >>> plip0: flags=108810 mtu 1500 >>> lo0: flags=8049 mtu 16384 >>> inet6 ::1 prefixlen 128 >>> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x5 >>> inet 127.0.0.1 netmask 0xff000000 >>> >>> and the command "ngctl list" shows :- >>> >>> There are 4 total nodes: >>> Name: ngctl811 Type: socket ID: 00000011 Num >>> hooks: 0 >>> Name: Type: frame_relay ID: 00000004 Num >>> hooks: 1 >>> Name: sync_ar1 Type: sync_ar ID: 00000002 Num >>> hooks: 0 >>> Name: sync_ar0 Type: sync_ar ID: 00000001 Num >>> hooks: 1 >>> >>> Would it be the problem that I test it with cable disconnected from >>> the modem (i.e.CSU/DSU)? >>> >>> Thanks a lot. >>> >>> John Mok >>> >>> >>> Julian Elischer wrote: >>> >>>> did the last command do anything? >>>> >>>> please show the output of: >>>> ifconfig >>>> ngctl list >>>> >>>> >>