From owner-freebsd-questions Mon Sep 20 6:56:56 1999 Delivered-To: freebsd-questions@freebsd.org Received: from rknebel.uplink.net (rknebel.uplink.net [209.173.88.243]) by hub.freebsd.org (Postfix) with ESMTP id 8241314CB8 for ; Mon, 20 Sep 1999 06:56:49 -0700 (PDT) (envelope-from rknebel@rknebel.uplink.net) Received: (from rknebel@localhost) by rknebel.uplink.net (8.9.3/8.9.3) id JAA00344 for questions@freebsd.org; Mon, 20 Sep 1999 09:56:17 -0400 (EDT) (envelope-from rknebel) Date: Mon, 20 Sep 1999 09:56:17 -0400 From: Rick Knebel To: questions@freebsd.org Subject: Network Card Message-ID: <19990920095617.A301@rknebel.uplink.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.4i Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG Hi, i am trying to do IP aliasing with user ppp. I think my problen is a irq conflict between my ethernet card and my scsi card. I will include my dmesg and a number of relevant files if someone would be so kind to look then over and see if that is the problem. Dmesg Copyright (c) 1992-1999 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.2-RELEASE #4: Sun Sep 19 20:32:24 EDT 1999 root@rknebel.uplink.net:/usr/src/sys/compile/RICK Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III (501.14-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x672 Stepping=2 Features=0x383f9ff,> real memory = 268435456 (262144K bytes) avail memory = 257806336 (251764K bytes) Preloaded elf kernel "kernel" at 0xc0356000. Probing for devices on PCI bus 0: chip0: rev 0x03 on pci0.0.0 chip1: rev 0x03 on pci0.1.0 chip2: rev 0x02 on pci0.4.0 ide_pci0: rev 0x01 on pci0.4.1 chip3: rev 0x02 on pci0.4.3 fxp0: rev 0x02 int a irq 9 on pci0.9.0 fxp0: Ethernet address 00:a0:c9:f2:32:3b ncr0: rev 0x01 int a irq 9 on pci0.10.0 Probing for devices on PCI bus 1: vga0: rev 0x11 int a irq 11 on pci1.0.0 Probing for PnP devices: CSN 1 Vendor ID: CTL00e4 [0xe4008c0e] Serial 0x1b940231 Comp ID: PNPb02f [0x2fb0 d041] Probing for devices on the ISA bus: sc0 on isa sc0: VGA color <16 virtual consoles, flags=0x0> ed0 not found at 0x280 fe0 not found at 0x300 atkbdc0 at 0x60-0x6f on motherboard atkbd0 irq 1 on isa psm0 irq 12 on isa psm0: model Generic PS/2 mouse, device ID 0 sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A sio2 at 0x3e8-0x3ef irq 4 on isa sio2: type 16550A fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (atapi): , removable, accel, dma, io rdis acd0: drive speed 5512KB/sec, 256KB cache acd0: supported read types: CD-R, CD-RW, CD-DA acd0: Audio: play, 16 volume levels acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM 120mm data disc loaded, unlocked wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 0 (atapi): , removable, accel, dma, iordis wdc1: ATAPI streaming tapes not configured wt0 not found at 0x300 mcd0 not found at 0x300 matcdc0 not found at 0x230 scd0 not found at 0x230 ppc0 at 0x378 irq 7 flags 0x40 on isa ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/9 bytes threshold lpt0: on ppbus 0 lpt0: Interrupt-driven port ppi0: on ppbus 0 plip0: on ppbus 0 lpt0: on ppbus 0 lpt0: Interrupt-driven port ie0: unknown board_id: f000 ie0 not found at 0x300 ep0 not found at 0x300 ex0 not found le0 not found at 0x300 lnc0 not found at 0x280 ze0 not found at 0x300 zp0 not found at 0x300 cs0 not found at 0x300 adv0 not found at 0x330 bt_isa_probe: Probe failled for card at 0x330 bt_isa_probe: Probe failled for card at 0x334 bt_isa_probe: Probe failled for card at 0x230 bt_isa_probe: Probe failled for card at 0x234 bt_isa_probe: Probe failled for card at 0x130 bt_isa_probe: Probe failled for card at 0x134 bt0 not found at 0x134 aha0 not found at 0x134 vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa npx0 on motherboard npx0: INT 16 interface Waiting 15 seconds for SCSI devices to settle changing root device to da1s1a cd0 at ncr0 bus 0 target 6 lun 0 cd0: Removable CD-ROM SCSI-2 device cd0: 8.333MB/s transfers (8.333MHz, offset 31) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray c losed da2 at ncr0 bus 0 target 2 lun 0 da2: Removable Direct Access SCSI-2 device da2: 3.300MB/s transfers da2: Attempt to query device size failed: NOT READY, Medium not present da0 at ncr0 bus 0 target 0 lun 0 da0: Fixed Direct Access SCSI-3 device da0: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C) da1 at ncr0 bus 0 target 1 lun 0 da1: Fixed Direct Access SCSI-3 device da1: 40.000MB/s transfers (20.000MHz, offset 31, 16bit), Tagged Queueing Enabled da1: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C) pid 231 (Xaccel): trap 12 with interrupts disabled if config -a fxp0: flags=8802 mtu 1500 ether 00:a0:c9:f2:32:3b media: autoselect (10baseT/UTP) status: active supported media: autoselect 100baseTX 100baseTX 10baseT/UTP 10baseT/UTP lp0: flags=8810 mtu 1500 tun0: flags=8051 mtu 1500 inet 209.173.88.243 --> 209.173.88.252 netmask 0xffffff00 sl0: flags=c010 mtu 552 ppp0: flags=8010 mtu 1500 lo0: flags=8049 mtu 16384 inet 127.0.0.1 netmask 0xff000000 rc.conf moused_type="NO" moused_enable="NO" ifconfig_fxp0="inet 192.168.1.1 netmask 255.255.255.0" ifconfig_lo0="inet 127.0.0.1" network_interface="lo0 fxp0" gateway_enable="YES" nfs_server_enable="YES" nfs_client_enable="YES" hostname="rknebel.uplink.net" lpd_enable="YES" host 127.0.0.1 localhost localhost.my.domain myname.my.domain 209.173.88.243 rknebel rknebel.uplink.net 192.168.1.1 free free.uplink.net 192.168.1.2 mac mac.uplink.net 192.168.1.3 win win.uplink.net My network card is an Intel EtherExpress My scsi card is a Symbios They both want to use irq 9 it seems Thanks Rick -- Rick Knebel rknebel@uplink.net To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message