Date: Tue, 22 Aug 2006 4:15:42 -0700 From: Vizion <vizion@vizion.occoxmail.com> To: <amd64@freebsd.org> Subject: dmesg - errors Message-ID: <20060822111542.EDEP15709.dukecmmtao03.coxmail.com@dukecmmtao03>
next in thread | raw e-mail | index | archive | help
There are a number of reports in dmesg I do not understand. \*** mark start of section ***\ marks end of section for each query Can anyone please tell me what action, if any, I should take for each section. Comment start is indicated by !!** Multi-line comments end with **!! Thanks in advance. david ______________________________ Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RELEASE #0: Sun May 7 04:15:57 UTC 2006 root@bloom.cse.buffalo.edu:/usr/obj/usr/src/sys/SMP ACPI APIC Table: <GBT AWRDACPI> Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: AMD Athlon(tm) 64 Processor 3200+ (2009.16-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x20ff2 Stepping = 2 Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2> Features2=0x1<SSE3> AMD Features=0xe2500800<SYSCALL,NX,MMX+,FFXSR,LM,3DNow+,3DNow> AMD Features2=0x1<LAHF> real memory = 2080309248 (1983 MB) avail memory = 1997578240 (1905 MB) ioapic0 <Version 1.1> irqs 0-23 on motherboard kbd0 at kbdmux0 acpi0: <GBT AWRDACPI> on motherboard \*** acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR ACPI-0501: *** Error: Handler for [SystemMemory] returned AE_AML_ALIGNMENT ACPI-1304: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 0xffffff0000bdbd80), AE_AML_ALIGNMENT ACPI-0239: *** Error: Method execution failed [\\_SB_.MEM_._CRS] (Node 0xffffff0000bdbd80), AE_AML_ALIGNMENT can't fetch resources for \\_SB_.MEM_ - AE_AML_ALIGNMENT !!** what is going on here? ***\ cpu0: <ACPI CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 \*** !!** Is this a follow up from previous section? pci0: <memory, RAM> at device 0.0 (no driver attached) pci0: <memory, RAM> at device 0.1 (no driver attached) pci0: <memory, RAM> at device 0.2 (no driver attached) pci0: <memory, RAM> at device 0.3 (no driver attached) pci0: <memory, RAM> at device 0.4 (no driver attached) pci0: <memory, RAM> at device 0.5 (no driver attached) pci0: <memory, RAM> at device 0.6 (no driver attached) pci0: <memory, RAM> at device 0.7 (no driver attached) pci0: <display, VGA> at device 5.0 (no driver attached) pci0: <memory, RAM> at device 9.0 (no driver attached) ***\ isab0: <PCI-ISA bridge> at device 10.0 on pci0 isa0: <ISA bus> on isab0 pci0: <serial bus, SMBus> at device 10.1 (no driver attached) pci0: <memory, RAM> at device 10.2 (no driver attached) ohci0: <OHCI (generic) USB controller> mem 0xf7008000-0xf7008fff irq 21 at device 11.0 on pci0 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: SMM does not respond, resetting usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 8 ports with 8 removable, self powered ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7004000-0xf70040ff irq 22 at device 11.1 on pci0 ehci0: [GIANT-LOCKED] usb1: EHCI version 1.0 usb1: companion controller, 8 ports each: usb0 usb1: <EHCI (generic) USB 2.0 controller> on ehci0 usb1: USB revision 2.0 uhub1: nVidia EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub1: 8 ports with 8 removable, self powered umass0: USB2.0 CardReader, rev 2.00/91.38, addr 2 atapci0: <nVidia nForce MCP51 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 13.0 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 atapci1: <nVidia nForce MCP51 SATA300 controller> port 0x9f0-0x9f7,0xbf0-0xbf3,0x970-0x977,0xb70-0xb73,0xd800-0xd80f mem 0xf7007000-0xf7007fff irq 23 at device 14.0 on pci0 ata2: <ATA channel 0> on atapci1 ata3: <ATA channel 1> on atapci1 atapci2: <nVidia nForce MCP51 SATA300 controller> port 0x9e0-0x9e7,0xbe0-0xbe3,0x960-0x967,0xb60-0xb63,0xc400-0xc40f mem 0xf7006000-0xf7006fff irq 20 at device 15.0 on pci0 ata4: <ATA channel 0> on atapci2 ata5: <ATA channel 1> on atapci2 pcib1: <ACPI PCI-PCI bridge> at device 16.0 on pci0 pci1: <ACPI PCI bus> on pcib1 fwohci0: <Texas Instruments TSB43AB23> mem 0xf4005000-0xf40057ff,0xf4000000-0xf4003fff irq 16 at device 6.0 on pci1 fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:d0:03:56:00:b2:b7:e6 fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:d0:03:b2:b7:e6 fwe0: Ethernet address: 02:d0:03:b2:b7:e6 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xf4004000-0xf40040ff irq 17 at device 7.0 on pci1 miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto rl0: Ethernet address: 00:30:bd:b6:d9:e0 fwohci1: <VIA Fire II (VT6306)> port 0xa400-0xa47f mem 0xf4006000-0xf40067ff irq 18 at device 14.0 on pci1 fwohci1: OHCI version 1.0 (ROM=1) fwohci1: No. of Isochronous channels is 4. fwohci1: EUI64 00:00:14:85:00:ca:4a:75 fwohci1: Phy 1394a available S400, 2 ports. fwohci1: Link S400, max_rec 2048 bytes. firewire1: <IEEE1394(FireWire) bus> on fwohci1 fwe1: <Ethernet over FireWire> on firewire1 if_fwe1: Fake Ethernet address: 02:00:14:ca:4a:75 fwe1: Ethernet address: 02:00:14:ca:4a:75 fwe1: if_start running deferred for Giant sbp1: <SBP-2/SCSI over FireWire> on firewire1 fwohci1: Initiate bus reset fwohci1: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire1: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire1: bus manager 0 (me) pci0: <multimedia> at device 16.1 (no driver attached) pci0: <bridge> at device 20.0 (no driver attached) sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd1 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model IntelliMouse, device ID 3 orm0: <ISA Option ROMs> at iomem 0xd0000-0xd3fff,0xd4000-0xd57ff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounter "TSC" frequency 2009158157 Hz quality 800 Timecounters tick every 1.000 msec module_register_init: MOD_LOAD (amr_linux, 0xffffffff8062a040, 0) error 6 \*** !!** I have the following hard drives installed. Western Digital WD2000JD in Physical location A is SATA but does not seem to be recognized. Is connected via SATA Bus 2 on motherboard. ad0 is a Western Digital WD2000JB-00KFA0 08.05J08 Physical Location B is IDE ata-0master UDMA100. Is connected via IDE1 on motherboard. ad4 is a Seagate ST3160827AS 3.42 recognized as ata2 -master SATA150.Is connected via SATA Bus 1 on motherboard. acd0 is a CDRW <LITE-ON CD-RW SOHR-5239S/2s03> at ata0-slave UDMA33. Is connected via IDE1 on motherboard. I cannot understand why the WD2000JD is not recognized. **!! ad0: 190781MB <WDC WD2000JB-00KFA0 08.05J08> at ata0-master UDMA100 acd0: CDRW <LITE-ON CD-RW SOHR-5239S/2S03> at ata0-slave UDMA33 ad4: 152627MB <Seagate ST3160827AS 3.42> at ata2-master SATA150 ***\ da0 at umass-sim0 bus 0 target 0 lun 0 da0: <USB2.0 CF CardReader > Removable Direct Access SCSI-0 device da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present da1 at umass-sim0 bus 0 target 0 lun 1 da1: <USB2.0 CBO CardReader > Removable Direct Access SCSI-0 device da1: 40.000MB/s transfers da1: Attempt to query device size failed: NOT READY, Medium not present (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 -> 6 (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 -> 6 (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error (da0:umass-sim0:0:0:0): SCSI Status: Check Condition (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 (da0:umass-sim0:0:0:0): Medium not present (da0:umass-sim0:0:0:0): Unretryable error Opened disk da0 -> 6 (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error (da1:umass-sim0:0:0:1): SCSI Status: Check Condition (da1:umass-sim0:0:0:1): NOT READY asc:3a,0 (da1:umass-sim0:0:0:1): Medium not present (da1:umass-sim0:0:0:1): Unretryable error Opened disk da1 -> 6 (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error (da1:umass-sim0:0:0:1): SCSI Status: Check Condition (da1:umass-sim0:0:0:1): NOT READY asc:3a,0 (da1:umass-sim0:0:0:1): Medium not present (da1:umass-sim0:0:0:1): Unretryable error Opened disk da1 -> 6 (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error (da1:umass-sim0:0:0:1): SCSI Status: Check Condition (da1:umass-sim0:0:0:1): NOT READY asc:3a,0 (da1:umass-sim0:0:0:1): Medium not present (da1:umass-sim0:0:0:1): Unretryable error Opened disk da1 -> 6 Trying to mount root from ufs:/dev/ad0s1a dragon_saver: the console does not support M_VGA_CG320 module_register_init: MOD_LOAD (dragon_saver, 0xffffffffb39ab540, 0) error 19 \*** !!** What is happening here?? pid 12388 (java), uid 0: exited on signal 6 (core dumped) pid 40561 (java), uid 0: exited on signal 6 (core dumped) pid 40557 (java), uid 0: exited on signal 6 (core dumped) pid 40559 (java), uid 0: exited on signal 6 (core dumped) pid 40560 (java), uid 0: exited on signal 6 (core dumped) pid 40556 (java), uid 0: exited on signal 6 (core dumped) pid 40558 (java), uid 0: exited on signal 6 (core dumped) pid 66743 (javac), uid 0: exited on signal 6 (core dumped) pid 99229 (conftest), uid 0: exited on signal 12 (core dumped) ***\
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20060822111542.EDEP15709.dukecmmtao03.coxmail.com>