Date: Sun, 18 Oct 2009 17:29:51 +0200 From: Ian FREISLICH <ianf@clue.co.za> To: Rui Paulo <rpaulo@freebsd.org> Cc: current@freebsd.org Subject: Re: urtw(4) feedback. Message-ID: <E1MzXhh-0000Up-03@clue.co.za> In-Reply-To: <933A2245-8097-472E-8C06-BE57A4AA05F5@freebsd.org> References: <933A2245-8097-472E-8C06-BE57A4AA05F5@freebsd.org> <20091018003823.GH67082@weongyo> <E1MvVXy-00031b-Mt@clue.co.za> <E1MzQLP-0001lX-VS@clue.co.za>
next in thread | previous in thread | raw e-mail | index | archive | help
Rui Paulo wrote: > On 18 Oct 2009, at 08:38, Ian FREISLICH wrote: > > > Weongyo Jeong wrote: > >> On Wed, Oct 07, 2009 at 02:23:10PM +0200, Ian Freislich wrote: > >>> Hi > >>> > >>> FWIW, the manual can be updated to include support for the Linksys > >>> WG111v3 adapter. Mine detects as follows: > >>> > >>> ugen4.3: <product 0x4260 vendor 0x0846> at usbus4, cfg=0 md=HOST > >>> spd=HIGH ( > > 480Mbps) pwr=ON > >>> > >>> urtw0: <vendor 0x0846 product 0x4260, class 0/0, rev 2.00/2.00, > >>> addr 3> on > > usbus4 > >>> urtw0: rtl8187b rf rtl8225z2 hwrev e > >>> > >>> Opening it up confirms the presence of a RTL8187B. > >>> > >>> However throughput is very poor, I haven't been able to get more > >>> than about 130kB/s and pings seem to be timed every 1.5 seconds. > >> > >> I'd committed a major change of urtw(4) for RTL8187B devices; > >> r198194. > >> Could you please test with it? I hope TX works than before. > > > > Thanks, I saw the commit. Should I back out Paulo's changes to test? > > It did merge cleanly with his code from P4. > > They weren't my changes, they were Weongyo's. Right. Well, the committed changes with the files from P4 were a serious regression. I haven't been able to try stock -CURRENT yet. Ian -- Ian Freislich
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?E1MzXhh-0000Up-03>