Date: Sun, 24 Oct 2004 10:52:04 +0200 From: Miguel Mendez <flynn@energyhq.es.eu.org> To: Pawel Jakub Dawidek <pjd@FreeBSD.org> Cc: freebsd-current@freebsd.org Subject: Re: ccd and gstripe on 5.3-RC Message-ID: <20041024105204.7da25d78.flynn@energyhq.es.eu.org> In-Reply-To: <20041024071759.GS73767@darkness.comp.waw.pl> References: <20041022173922.C261616A4E1@hub.freebsd.org> <1098471638.31562.34.camel@zappa.Chelsea-Ct.Org> <20041024071759.GS73767@darkness.comp.waw.pl>
next in thread | previous in thread | raw e-mail | index | archive | help
--Signature=_Sun__24_Oct_2004_10_52_04_+0200_Qum8T_oFbOEhBjCH Content-Type: text/plain; charset=US-ASCII Content-Disposition: inline Content-Transfer-Encoding: 7bit On Sun, 24 Oct 2004 09:17:59 +0200 Pawel Jakub Dawidek <pjd@FreeBSD.org> wrote: Hi, > It should work with any GEOM providers. > Without more info it will be hard to track it down... Ok, a bit more info... flynn@scienide% sudo camcontrol devlist <QUANTUM QM39100TD-SW N491> at scbus0 target 0 lun 0 (pass0,da0) <PLEXTOR CD-ROM PX-20TS 1.01> at scbus0 target 3 lun 0 (pass1,cd0) <SEAGATE ST39236LW 0010> at scbus0 target 4 lun 0 (pass2,da1) <YAMAHA CRW2100S 1.0H> at scbus0 target 6 lun 0 (pass3,cd1) Those are the devices installed in the box. An old Quantum and a newer U160 Seagate Barracuda are the harddrives. I used gstripe with a stock 5.3-RC1 GENERIC kernel. All the devices are connected to an Adaptec 19160 card. As per the man page, this is what I did: $ gstripe label -v -s 4096 usr /dev/da0s1d /dev/da1s1d $ newfs /dev/stripe/usr $ mount /dev/stripe/usr /mnt [...] It worked fine the first time. I rebooted the box and booted in single user mode. I had to manually start the stripe, mounted it and tar'd /usr to its new location. After that I proceeded to delete the normal /usr. Edited /boot/loader.conf to make it load the geom_stripe module and rebooted once more. This time a bunch of messages appeared. geom_stripe started traversing the disks mentioning da0, da0s1[ad] and the da1[bd]. It attached the device, and a few lines later it complained and destroyed it. As I said I don't have the exact message because I had to reinstall (my /usr was no more). Cheers, -- Miguel Mendez <flynn@energyhq.es.eu.org> http://www.energyhq.es.eu.org PGP Key: 0xDC8514F1 Note: All HTML mail goes to /dev/null --Signature=_Sun__24_Oct_2004_10_52_04_+0200_Qum8T_oFbOEhBjCH Content-Type: application/pgp-signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.6 (FreeBSD) iD8DBQFBe203nLctrNyFFPERAgPFAKC4Z7G2rKzPpPyKF7zwe9jXQc4EbwCaAuQI uU+iTiDZNTpGREKQStQc+ZI= =EdWf -----END PGP SIGNATURE----- --Signature=_Sun__24_Oct_2004_10_52_04_+0200_Qum8T_oFbOEhBjCH--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20041024105204.7da25d78.flynn>