Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 01 Jun 2004 03:39:22 +0100
From:      john huss <johnh@thebunker.net>
To:        freebsd-questions@freebsd.org
Subject:   make depend error
Message-ID:  <40BBEC5A.1020708@thebunker.net>

next in thread | raw e-mail | index | archive | help
Hello,

Can any of you kind teeps help me out please? I'm trying to compile my 
FreeBSD 4.9 kernel for the first time and am having problems.

I am recompiling for several reasons; to learn about compiling the 
kernel; to get sound support for my isa soundcard and (finally); to 
compile in some firewall options mentioned in the handbook.

Here's what I've done:

1. used /stand/sysintsall to install the sys/src to my pc (from CD)
2. cd /usr/src/sys/i386/conf/
3. cp GENERIC SNDK
4. emacs SNDK (made only a few changes - see below for specifics)
5. /usr/sbin/config SNDK (this went ok, no warnings or errors)
6. cd ../../compile/SNDK
7. make depend

-- and here's where I get the following error:
<output>
su-2.05b# make depend
cc -c -O -pipe  -Wall -Wredundant-decls -Wnested-externs 
-Wstrict-prototypes  -Wmissing-prototypes -Wpointer-arith -Winline 
-Wcast-qual  -fformat-extensions -ansi  -nostdinc -I- -I. -I../.. 
-I../../../include -I../../contrib/dev/acpica -I../../contrib/ipfilter 
-D_KERNEL -include opt_global.h  -mpreferred-stack-boundary=2 
../../i386/i386/genassym.c
In file included from ../../sys/inttypes.h:9,
                  from ../../sys/types.h:48,
                  from ../../sys/param.h:64,
                  from ../../i386/i386/genassym.c:44:
machine/ansi.h:118: redefinition of `__int64_t'
machine/_types.h:58: `__int64_t' previously declared here
machine/ansi.h:119: redefinition of `__uint64_t'
machine/_types.h:59: `__uint64_t' previously declared here
machine/ansi.h:130: redefinition of `__int8_t'
machine/_types.h:45: `__int8_t' previously declared here
machine/ansi.h:131: redefinition of `__uint8_t'
machine/_types.h:46: `__uint8_t' previously declared here
machine/ansi.h:132: redefinition of `__int16_t'
machine/_types.h:47: `__int16_t' previously declared here
machine/ansi.h:133: redefinition of `__uint16_t'
machine/_types.h:48: `__uint16_t' previously declared here
machine/ansi.h:134: redefinition of `__int32_t'
machine/_types.h:49: `__int32_t' previously declared here
machine/ansi.h:135: redefinition of `__uint32_t'
machine/_types.h:50: `__uint32_t' previously declared here
machine/ansi.h:137: redefinition of `__intptr_t'
machine/_types.h:77: `__intptr_t' previously declared here
machine/ansi.h:138: redefinition of `__uintptr_t'
machine/_types.h:94: `__uintptr_t' previously declared here
machine/ansi.h:147: conflicting types for `__mbstate_t'
../../sys/_types.h:100: previous declaration of `__mbstate_t'
machine/ansi.h:147: warning: redundant redeclaration of `__mbstate_t' in 
same scope
../../sys/_types.h:100: warning: previous declaration of `__mbstate_t'
In file included from ../../sys/param.h:64,
                  from ../../i386/i386/genassym.c:44:
../../sys/types.h:139: redefinition of `size_t'
../../../include/stddef.h:55: `size_t' previously declared here
*** Error code 1

Stop in /usr/src/sys/compile/SNDK.
su-2.05b#
</output>

In case you wish to see what changes i've made to the kernel, here's my 
SNDK version of the GENERIC file:

<sndk>
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
# 
http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.54 2003/04/28 03:41:46 
simokawa Exp $

machine		i386
#cpu		I386_CPU
#cpu		I486_CPU
#cpu		I586_CPU
cpu		I686_CPU
ident		SNDK
maxusers	0

#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

options 	MATH_EMULATE		#Support for x87 emulation
options 	INET			#InterNETworking
options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	UFS_DIRHASH		#Improve performance on big directories
options 	MFS			#Memory Filesystem
options 	MD_ROOT			#MD is a potential root device
options 	NFS			#Network Filesystem
options 	NFS_ROOT		#NFS usable as root device, NFS required
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options 	CD9660_ROOT		#CD-ROM usable as root, CD9660 required
options 	PROCFS			#Process filesystem
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	SCSI_DELAY=15000	#Delay (in ms) before probing SCSI
options 	UCONSOLE		#Allow users to grab the console
options 	USERCONFIG		#boot -c editor
options 	VISUAL_USERCONFIG	#visual boot -c editor
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	P1003_1B		#Posix P1003_1B real-time extensions
options 	_KPOSIX_PRIORITY_SCHEDULING
options 	ICMP_BANDLIM		#Rate limit bad replies
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~128k to driver.
options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~215k to driver.

# To make an SMP kernel, the next two are needed
#options 	SMP			# Symmetric MultiProcessor Kernel
#options 	APIC_IO			# Symmetric (APIC) I/O

# To support HyperThreading, HTT is needed in addition to SMP and APIC_IO
#options 	HTT			# HyperThreading Technology

device		isa
#device		eisa
device		pci

# Floppy drives
device		fdc0	at isa? port IO_FD1 irq 6 drq 2
device		fd0	at fdc0 drive 0
device		fd1	at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the following one:
#device		fdc0

# ATA and ATAPI devices
device		ata0	at isa? port IO_WD1 irq 14
device		ata1	at isa? port IO_WD2 irq 15
device		ata
device		atadisk			# ATA disk drives
device		atapicd			# ATAPI CDROM drives
device		atapifd			# ATAPI floppy drives
device		atapist			# ATAPI tape drives
options 	ATA_STATIC_ID		#Static device numbering

# SCSI Controllers
device		ahb		# EISA AHA1742 family
device		ahc		# AHA2940 and onboard AIC7xxx devices
device		ahd		# AHA39320/29320 and onboard AIC79xx devices
device		amd		# AMD 53C974 (Tekram DC-390(T))
device		isp		# Qlogic family
device		mpt		# LSI-Logic MPT/Fusion
device		ncr		# NCR/Symbios Logic
device		sym		# NCR/Symbios Logic (newer chipsets)
options 	SYM_SETUP_LP_PROBE_MAP=0x40
				# Allow ncr to attach legacy NCR devices when
				# both sym and ncr are configured

device		adv0	at isa?
device		adw
device		bt0	at isa?
device		aha0	at isa?
device		aic0	at isa?

device		ncv		# NCR 53C500
device		nsp		# Workbit Ninja SCSI-3
device		stg		# TMC 18C30/18C50

# SCSI peripherals
device		scbus		# SCSI bus (required)
device		da		# Direct Access (disks)
device		sa		# Sequential Access (tape etc)
device		cd		# CD
device		pass		# Passthrough device (direct SCSI access)

# RAID controllers interfaced to the SCSI subsystem
device		asr		# DPT SmartRAID V, VI and Adaptec SCSI RAID
device		dpt		# DPT Smartcache - See LINT for options!
device		iir		# Intel Integrated RAID
device		mly		# Mylex AcceleRAID/eXtremeRAID
device		ciss		# Compaq SmartRAID 5* series

# RAID controllers
device		aac		# Adaptec FSA RAID, Dell PERC2/PERC3
#device		aacp		# SCSI passthrough for aac (requires CAM)
device		ida		# Compaq Smart RAID
device		amr		# AMI MegaRAID
device		mlx		# Mylex DAC960 family
device		twe		# 3ware Escalade

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc0	at isa? port IO_KBD
device		atkbd0	at atkbdc? irq 1 flags 0x1
device		psm0	at atkbdc? irq 12

device		vga0	at isa?

# splash screen/screen saver
pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? flags 0x100

# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa?
#options 	XSERVER			# support for X server on a vt console
#options 	FAT_CURSOR		# start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT 
lines
#options 	PCVT_SCANSET=2		# IBM keyboards are non-std

device		agp		# support several AGP chipsets

# Floating point support - do not disable.
device		npx0	at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device		apm0	at nexus? disable flags 0x20 # Advanced Power Management

# PCCARD (PCMCIA) support
device		card
device		pcic0	at isa? irq 0 port 0x3e0 iomem 0xd0000
device		pcic1	at isa? irq 0 port 0x3e2 iomem 0xd4000 disable

# Serial (COM) ports
device		sio0	at isa? port IO_COM1 flags 0x10 irq 4
device		sio1	at isa? port IO_COM2 irq 3
device		sio2	at isa? disable port IO_COM3 irq 5
device		sio3	at isa? disable port IO_COM4 irq 9

# Parallel port
device		ppc0	at isa? irq 7
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		plip		# TCP/IP over parallel
device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da


# PCI Ethernet NICs.
device		de		# DEC/Intel DC21x4x (``Tulip'')
device		em		# Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
device		txp		# 3Com 3cR990 (``Typhoon'')
device		vx		# 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
device		dc		# DEC/Intel 21143 and various workalikes
device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
device		pcn		# AMD Am79C97x PCI 10/100 NICs
device		rl		# RealTek 8129/8139
device		sf		# Adaptec AIC-6915 (``Starfire'')
device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
device		ste		# Sundance ST201 (D-Link DFE-550TX)
device		tl		# Texas Instruments ThunderLAN
device		tx		# SMC EtherPower II (83c170 ``EPIC'')
device		vr		# VIA Rhine, Rhine II
device		wb		# Winbond W89C840F
device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')
device		bge		# Broadcom BCM570x (``Tigon III'')

# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
device		ed0	at isa? disable port 0x280 irq 10 iomem 0xd8000
device		ex
device		ep
device		fe0	at isa? disable port 0x300
# Xircom Ethernet
device		xe
# PRISM I IEEE 802.11b wireless NIC.
device		awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA attachment needed
# and resources will always be dynamically assigned by the pccard code.
device		wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP
# mode (the factory default). If you set the switches on your ISA
# card for a manually chosen I/O address and IRQ, you must specify
# those parameters here.
device		an
# The probe order of these is presently determined by i386/isa/isa_compat.c.
device		ie0	at isa? disable port 0x300 irq 10 iomem 0xd0000
#device		le0	at isa? disable port 0x300 irq 5 iomem 0xd0000
device		lnc0	at isa? disable port 0x280 irq 10 drq 0
device		cs0	at isa? disable port 0x300
device		sn0	at isa? disable port 0x300 irq 10

# Pseudo devices - the number indicates how many units to allocate.
pseudo-device	loop		# Network loopback
pseudo-device	ether		# Ethernet support
pseudo-device	sl	1	# Kernel SLIP
pseudo-device	ppp	1	# Kernel PPP
pseudo-device	tun		# Packet tunnel.
pseudo-device	pty		# Pseudo-ttys (telnet etc)
pseudo-device	md		# Memory "disks"
pseudo-device	gif		# IPv6 and IPv4 tunneling
pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device	bpf		#Berkeley packet filter

# USB support
device		uhci		# UHCI PCI->USB interface
device		ohci		# OHCI PCI->USB interface
device		usb		# USB Bus (required)
device		ugen		# Generic
device		uhid		# "Human Interface Devices"
device		ukbd		# Keyboard
device		ulpt		# Printer
device		umass		# Disks/Mass storage - Requires scbus and da
device		ums		# Mouse
device		uscanner	# Scanners
device		urio		# Diamond Rio MP3 Player
# USB Ethernet, requires mii
device		aue		# ADMtek USB ethernet
device		cue		# CATC USB ethernet
device		kue		# Kawasaki LSI USB ethernet

# FireWire support
device		firewire	# FireWire bus code
device		sbp		# SCSI over FireWire (Requires scbus and da)
device		fwe		# Ethernet over FireWire (non-standard!)

#john
device		pcm
options		IPFIREWALL
options		IPFIREWALL_VERBOSE
options		IPFIREWALL_VERBOSE_LIMIT=10

</SNDK>

The only changes I have made are:

*setting the cpu to 686 (pc here is a Pentium 2 400mhz and dmesg reckons 
it is a 686 class cpu)
*commenting out eisa support (don't have any of these cards)
*adding firewall stuff
*adding pcm line

I have tried just using the GENERIC kernel but this fails with the same 
error also.

Have also tried adding sys/src from /stand/sysinstall but instead of 
using cd to update, have tried the FreeBSD ftp site, but this still gave 
the same error.

I have also tried googling about and searching google-groups but to no 
avail!

Can any of you kind teeps point me in the direction of where I'm going 
wrong?

Cheers,


John H



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?40BBEC5A.1020708>