Date: Wed, 12 Mar 2003 17:27:44 -0500 From: "Allan Jude" <937863@primus.ca> To: <freebsd-stable@FreeBSD.ORG> Subject: nForce1 NIC Support RE: Support for the nFORCE2? Message-ID: <!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAA4RatOouMvEOzXXL4aXw9/cKAAAAQAAAAqwU%2B9e%2BgI0q6c8AUa2TLPAEAAAAA@primus.ca> In-Reply-To: <xzpr89cnu3l.fsf@flood.ping.uio.no>
next in thread | previous in thread | raw e-mail | index | archive | help
Does anyone know if there is support for the nForce-1 onboard NIC? -----Original Message----- From: owner-freebsd-stable@FreeBSD.ORG [mailto:owner-freebsd-stable@FreeBSD.ORG] On Behalf Of Dag-Erling Smorgrav Sent: Wednesday, March 12, 2003 4:39 PM To: Bernt Nilsson Cc: freebsd-stable@FreeBSD.ORG Subject: Re: Support for the nFORCE2? Bernt Nilsson <Bernt.Nilsson@abc.se> writes: > onsdagen den 12 mars 2003 00.06 skrev Dag-Erling Smorgrav: > > USB 2.0 isn't supported, but USB 2.0 (EHCI) chipsets are generally > > backward compatible with OHCI which we do support. It is possible > > that adding the correct PCI ID to the ohci driver's attach routine > > would make it work. > Is this something I can do myself? In your own source tree, yes. > > 'pciconf -v -l' would help a lot in identifying your hardware. > Oh, I didn't know about that, but here goes: > [...] > ohci0@pci0:2:0: class=0x0c0310 card=0x0c111043 chip=0x006710de rev=0xa3 > hdr=0x00 > vendor = 'Nvidia Corporation' > class = serial bus > subclass = USB > ohci1@pci0:2:1: class=0x0c0310 card=0x0c111043 chip=0x006710de rev=0xa3 > hdr=0x00 > vendor = 'Nvidia Corporation' > class = serial bus > subclass = USB There you go, the USB controller was recognized as an OHCI-compliant controller. > none6@pci0:2:2: class=0x0c0320 card=0x0c111043 chip=0x006810de rev=0xa3 > hdr=0x00 > vendor = 'Nvidia Corporation' > class = serial bus > subclass = USB This is the EHCI bit, which isn't recognized since we don't support USB 2.0. > none7@pci0:4:0: class=0x020000 card=0x80a71043 chip=0x006610de rev=0xa1 > hdr=0x00 > vendor = 'Nvidia Corporation' > class = network > subclass = ethernet This is the onboard NIC. I can't find any information about it beyond "nForce MCP2 Networking Adapter" > none8@pci0:5:0: class=0x040100 card=0x0c111043 chip=0x006b10de rev=0xa2 > hdr=0x00 > vendor = 'Nvidia Corporation' > class = multimedia > subclass = audio This is an auxiliary sound processor (apparently for Dolby Digital coding) which we don't support. > none9@pci0:6:0: class=0x040100 card=0x80951043 chip=0x006a10de rev=0xa1 > hdr=0x00 > vendor = 'Nvidia Corporation' > class = multimedia > subclass = audio AC97-comaptible audio codec, supported by the ich driver (at least in -CURRENT) > pcib1@pci0:8:0: class=0x060400 card=0x00000000 chip=0x006c10de rev=0xa3 > hdr=0x01 > vendor = 'Nvidia Corporation' > class = bridge > subclass = PCI-PCI > atapci0@pci0:9:0: class=0x01018a card=0x0c111043 chip=0x006510de > rev=0xa2 hdr=0x00 > vendor = 'Nvidia Corporation' > class = mass storage > subclass = ATA > fwohci0@pci0:13:0: class=0x0c0010 card=0x809a1043 chip=0x006e10de > rev=0xa3 hdr=0x00 > vendor = 'Nvidia Corporation' > class = serial bus > subclass = FireWire FireWire controller, claimed by the fwohci driver > sis0@pci1:10:0: class=0x020000 card=0xf3111385 chip=0x0020100b rev=0x00 > hdr=0x00 > vendor = 'National Semiconductor' > device = 'DP83815/16 MacPhyter 10/100 Mb/s Ethernet MAC & PHY' > class = network > subclass = ethernet NatSemi NIC, claimed by the sis driver > none10@pci2:1:0: class=0x020000 card=0x80ab1043 chip=0x920110b7 > rev=0x40 hdr=0x00 > vendor = '3COM Corp, Networking Division' > class = network > subclass = ethernet This is a 3c920B-EMB, which is supported by the xl driver (at least in -CURRENT) but not attached because the driver wasn't loaded. > none11@pci3:0:0: class=0x030000 card=0x401d1043 chip=0x011010de > rev=0xa1 hdr=0x00 > vendor = 'Nvidia Corporation' > device = 'NV11 GeForce2 MX / MX 400' > class = display > subclass = VGA Graphics adapter, supported in XFree86 as of 4.2.1. DES -- Dag-Erling Smorgrav - des@ofug.org To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?!~!UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAA4RatOouMvEOzXXL4aXw9/cKAAAAQAAAAqwU%2B9e%2BgI0q6c8AUa2TLPAEAAAAA>