Date: Thu, 15 Jun 2000 12:20:55 +1000 (EST) From: Andy Farkas <andyf@speednet.com.au> To: Wilko Bulte <wkb@chello.nl> Cc: freebsd-bugs@FreeBSD.ORG Subject: Re: kern/11241: Install fails after SCSI probe Message-ID: <Pine.BSF.4.10.10006142154100.444-100000@backup.af.speednet.com.au> In-Reply-To: <200006132120.OAA88742@freefall.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
> Has an install of a FreeBSD version newer than 3.0 ever been attempted
> on this hardware? Preferably FreeBSD 4.0 that is? VLbus hardware is
> becoming rather exotic these days so I cannot test this myself.
I too would like to report that on a system I have, currently running
3.4-STABLE, which has an adaptec 284x VLbus SCSI adapter in it, does not
boot 4.0-RELEASE, or 4.0-STABLE because the probe fails to finish (ie. the
system locks up solid).
Is the problem a pnp thing, or a vlbus thing?
Following is the bootup script captured from the serial console:
Console: serial port
BIOS drive A: is disk0
BIOS drive C: is disk1
BIOS drive D: is disk2
BIOS 640kB/31744kB available memory
FreeBSD/i386 bootstrap loader, Revision 0.7
(root@monster.cdrom.com, Mon Mar 20 21:05:31 GMT 2000)
kernel text=0x21759d data=0x284f8+0x1eda0 syms=[0x4+0x306c0+0x4+0x322dd]
Please insert MFS root floppy and press enter:
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [kernel] in 9 seconds...
Type '?' for a list of commands, 'help' for more detailed help.
ok boot -v
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-STABLE #0: Thu Jun 15 10:53:44 EST 2000
root@:/usr/src/sys/compile/TEST
Calibrating clock(s) ... i8254 clock: 1193658 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CPU: i486 DX4 (486-class CPU)
Origin = "GenuineIntel" Id = 0x480 Stepping = 0
Features=0x3<FPU,VME>
real memory = 33554432 (32768K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x006ad000 - 0x01ff7fff, 26521600 bytes (6475 pages)
avail memory = 26054656 (25444K bytes)
Other BIOS signatures found:
ACPI: 00000000
Preloaded elf kernel "kernel" at 0xc0694000.
Preloaded mfs_root "/mfsroot" at 0xc06940a8.
md0: Preloaded image </mfsroot> 2949120 bytes at 0xc03c21e0
Creating DISK md0
md1: Malloc disk
Creating DISK md1
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0xffffffff
pci_open(2): mode 2 enable port (0x0cf8) is 0xff
npx0: <math processor> on motherboard
npx0: INT 16 interface
eisa0: <EISA bus> on motherboard
ahc0: <Adaptec 284X SCSI host adapter> at 0x1c00-0x1cff, irq 11 (edge)
ahc0: on eisa0 slot 1
ahc0: Using Edge Triggered Interrupts
ahc0: Reading SEEPROM...done.
ahc0: aic7770 <= Rev C, Single Channel A, SCSI Id=7, 4/255 SCBs
ahc0: Downloading Sequencer Program... 411 instructions downloaded
isa0: <ISA bus> on motherboard
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
Script done on Thu Jun 15 11:24:51 2000
--
:{ andyf@speednet.com.au
Andy Farkas
System Administrator
Speednet Communications
http://www.speednet.com.au/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.4.10.10006142154100.444-100000>