Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 06 Feb 2006 10:40:45 -0800
From:      Skye Poier <skye@f4.ca>
To:        freebsd-questions@freebsd.org
Subject:   Re: ICH7 + RAID = AHCI trouble
Message-ID:  <43E7982D.2010208@f4.ca>
In-Reply-To: <20060206112422.C887@hades.admin.frm2>
References:  <20060206112422.C887@hades.admin.frm2>

next in thread | previous in thread | raw e-mail | index | archive | help
Do you have

device ataraid

in your kernel config?  I have embedded LSI RAID in an Intel server and 
it's supported by that driver.

Skye


Joerg Pulz wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> 
> Hi,
> 
> i recently bought a new server with an Intel ICH7 chipset and embedded 
> LSI Raid.
> I set the SATA mode in the BIOS to RAID. After that, i was able to 
> configure a RAID1 array using the Controllers BIOS.
> Unfortunately, FreeBSD isn't seeing any of the installed HDs.
> I tried to change the BIOS settings for SATA in the BIOS to all 
> available methods (RIAD, AHCI, NATIVE) with no success.
> The only setting that makes FreeBSD able to see the HDs is COMPATIBLE, 
> but i loose the PATA channel if i use it, which is definitely not what i 
> want.
> I tried the above with 6.0-RELEASE and RELENG_6 from "Thu Feb  2 
> 18:32:06 CET 2006".
> I took a closer look into the RELENG_6 ata(4) code and found the 
> following line in ata-chipset.c :
> 
>      { ATA_I82801GB_R1, 0, AHCI, 0x00, ATA_SA300, "ICH7" }
> 
> After i changed this line to :
> 
>      { ATA_I82801GB_R1, 0,    0, 0x00, ATA_SA300, "ICH7" }
> 
> i was able to detect the two HDs AND the configured RAID1 array. I could 
> use fdisk(8) and bsdlabel(8) to set up the disk and can finally use it.
> Unfortunately, i can only use two disk, as all other channels do NOT 
> appaer in FreeBSD, i think this is related to my change in the source, 
> as previously all channels where available, but without HDs.
> I would really like to use the other channels too.
> One problem could be the "RAID or AHCI enabled - detection code" in 
> ata_chipset.c (rev 1.126.2.8 in RELENG_6) below line 1660, but i'm not 
> sure.
> 
> Is there any chance we can track this down to make it working in a 
> general way, without the need to change the sources everytime i've 
> cvsupped my source tree?
> 
> I'm glad to help wherever i can to solve this issue.
> 
> regards
> Joerg
> 
> - -- The beginning is the most important part of the work.
>                 -Plato
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.2 (FreeBSD)
> 
> iD8DBQFD5ynDSPOsGF+KA+MRAl4VAJ4nkUwNEhQxM1z1F/GN2akikL/18gCfXMtO
> 78X0bSZ1QLCNdy4BIc2RW68=
> =T1rd
> -----END PGP SIGNATURE-----
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to 
> "freebsd-questions-unsubscribe@freebsd.org"




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?43E7982D.2010208>