From owner-freebsd-stable Wed Nov 28 11:21:16 2001 Delivered-To: freebsd-stable@freebsd.org Received: from dargo.gwi.net (dargo.gwi.net [207.5.142.21]) by hub.freebsd.org (Postfix) with SMTP id 168FF37B416 for ; Wed, 28 Nov 2001 11:21:11 -0800 (PST) Received: (qmail 13478 invoked by uid 117); 28 Nov 2001 19:21:10 -0000 Date: Wed, 28 Nov 2001 14:21:10 -0500 From: Joshua Coombs To: freebsd-stable@freebsd.org Subject: 4.4 on a 386 Message-ID: <20011128142110.D16131@dargo.gwi.net> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.2.5i Sender: owner-freebsd-stable@FreeBSD.ORG Precedence: bulk List-ID: List-Archive: (Web Archive) List-Help: (List Instructions) List-Subscribe: List-Unsubscribe: X-Loop: FreeBSD.ORG I apologize for not including the previous post in the reply, mail2web is being weird... anyways, in regards to 4.4 on a 386 and not wanting to go live on the network: I have run across that, and it's not a 386 specific problem it was tied to the nic being a 3Com etherlink 3. Often times a generic kernel will annoy the 3com with it's device probes and cause it to lock just the nic, net result the card will be probed and found correctly, but if you look at ifconfig it'll have all 0's for a mac addy and won't respond to the outside world. The way around this is to either use the kernel conf option at boot to eliminate any devices not installed/used or use a custom stripped kernel. As far as weather or not the 386 is up to the task, at the most you may need to do as others have suggested and figure out a way to get swap enabled earlier in the install process, although I didn't have that problem on my 386sx with 8MB ram installing 4.1 over a modem. Other than that FreeBSD is still running quite well in the later releases on both my 386sx-25 with 16MB ram and my 386dx-40 with 32MB ram. One piece of advice I can give to get the most out of these boxes is use -Os instead of -O or -O2, etc as you are primarily memory limited. Keeping that box from hitting swap should be a top priority. Joshua Coombs www.x386.net Wannabe official S@$!box Compatibility maintainer To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message