From owner-freebsd-mobile@FreeBSD.ORG Thu Jan 1 19:58:33 2004 Return-Path: Delivered-To: freebsd-mobile@freebsd.org Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125]) by hub.freebsd.org (Postfix) with ESMTP id 6B8C016A4CE for ; Thu, 1 Jan 2004 19:58:33 -0800 (PST) Received: from dingo.soth.at (door.soth.at [80.110.102.19]) by mx1.FreeBSD.org (Postfix) with ESMTP id BBF3743D41 for ; Thu, 1 Jan 2004 19:57:45 -0800 (PST) (envelope-from toni@dingo.soth.at) Received: from dingo.soth.at (localhost.localdomain [127.0.0.1]) by dingo.soth.at (8.12.10/8.12.10) with ESMTP id i023viA1005638; Fri, 2 Jan 2004 04:57:44 +0100 Received: (from toni@localhost) by dingo.soth.at (8.12.10/8.12.10/Submit) id i023vh06005636; Fri, 2 Jan 2004 04:57:43 +0100 Date: Fri, 2 Jan 2004 04:57:43 +0100 From: Toni Andjelkovic To: freebsd-mobile@freebsd.org Message-ID: <20040102035743.GA5622@dingo.soth.at> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline User-Agent: Mutt/1.4.1i Subject: Can't boot 5.2-RC2 on Acer TravelMate 800LCi X-BeenThere: freebsd-mobile@freebsd.org X-Mailman-Version: 2.1.1 Precedence: list List-Id: Mobile computing with FreeBSD List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Fri, 02 Jan 2004 03:58:33 -0000 Trying to boot from the CD-ROM will hang the system reliably, with or without ACPI. I hope that someone may have an idea about what's wrong here, so I enclose the following output. Thank you, Toni ... npx0: on motherboard npx0: INT 16 interface acpi0: on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014 pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=33408086) pcibios: BIOS version 2.10 Using $PIR table, 10 entries at 0xc00fdcb0 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 embedded 2 6 A 0x61 3 4 5 6 7 9 10 11 12 embedded 2 4 A 0x68 3 4 5 6 7 9 10 11 12 embedded 2 4 B 0x69 3 4 5 6 7 9 10 11 12 embedded 2 7 A 0x62 10 embedded 2 2 A 0x63 3 4 5 6 7 9 10 11 12 embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12 embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 slot 1 1 0 A 0x60 3 4 5 6 7 9 10 11 12 AcpiOsDerivePciId: bus 0 dev 31 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 1 acpi0: Power Button (fixed) ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks GOOD min = 3, max = 4, width = 1 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 AcpiOsDerivePciId: bus 0 dev 0 func 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_cpu0: on acpi0 acpi_tz0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \_SB_.PCI0.LPC0.LNKA irq 10: [ 10] low,level,sharable 0.0.0 \_SB_.PCI0.LPC0.LNKB irq 10: [ 10] low,level,sharable 0.0.1 \_SB_.PCI0.LPC0.LNKC irq 10: [ 10] low,level,sharable 0.0.2 \_SB_.PCI0.LPC0.LNKD irq 5: [ 5] low,level,sharable 0.0.3 \_SB_.PCI0.LPC0.LNKA irq 10: [ 10] low,level,sharable 0.1.0 \_SB_.PCI0.LPC0.LNKA irq 10: [ 10] low,level,sharable 0.29.0 \_SB_.PCI0.LPC0.LNKD irq 5: [ 5] low,level,sharable 0.29.1 \_SB_.PCI0.LPC0.LNKC irq 10: [ 10] low,level,sharable 0.29.2 \_SB_.PCI0.LPC0.LNKH irq 10: [ 10] low,level,sharable 0.29.3 \_SB_.PCI0.LPC0.LNKA irq 10: [ 10] low,level,sharable 0.30.0 \_SB_.PCI0.LPC0.LNKB irq 10: [ 10] low,level,sharable 0.30.1 \_SB_.PCI0.LPC0.LNKC irq 10: [ 10] low,level,sharable 0.30.2 \_SB_.PCI0.LPC0.LNKD irq 5: [ 5] low,level,sharable 0.30.3 \_SB_.PCI0.LPC0.LNKC irq 10: [ 10] low,level,sharable 0.31.0 \_SB_.PCI0.LPC0.LNKB irq 10: [ 10] low,level,sharable 0.31.1 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \_SB_.PCI0.LPC0.LNKA irq 10: [ 10] low,level,sharable 0.0.0 \_SB_.PCI0.LPC0.LNKB irq 10: [ 10] low,level,sharable 0.0.1 \_SB_.PCI0.LPC0.LNKC irq 10: [ 10] low,level,sharable 0.0.2 \_SB_.PCI0.LPC0.LNKD irq 5: [ 5] low,level,sharable 0.0.3 \_SB_.PCI0.LPC0.LNKA irq 10: [ 10] low,level,sharable 0.1.0 \_SB_.PCI0.LPC0.LNKA irq 10: [ 10] low,level,sharable 0.29.0 \_SB_.PCI0.LPC0.LNKD irq 5: [ 5] low,level,sharable 0.29.1 \_SB_.PCI0.LPC0.LNKC irq 10: [ 10] low,level,sharable 0.29.2 \_SB_.PCI0.LPC0.LNKH irq 10: [ 10] low,level,sharable 0.29.3 \_SB_.PCI0.LPC0.LNKA irq 10: [ 10] low,level,sharable 0.30.0 \_SB_.PCI0.LPC0.LNKB irq 10: [ 10] low,level,sharable 0.30.1 \_SB_.PCI0.LPC0.LNKC irq 10: [ 10] low,level,sharable 0.30.2 \_SB_.PCI0.LPC0.LNKD irq 5: [ 5] low,level,sharable 0.30.3 \_SB_.PCI0.LPC0.LNKC irq 10: [ 10] low,level,sharable 0.31.0 \_SB_.PCI0.LPC0.LNKB irq 10: [ 10] low,level,sharable 0.31.1 pci0: on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base e0000000, size 28, enabled found-> vendor=0x8086, dev=0x3340, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x3341, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x00a0, cachelnsz=0 (dwords) lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001800, size 5, enabled pcib0: matched entry for 0.29.INTA (source \_SB_.PCI0.LPC0.LNKA) pcib0: slot 29 INTA is routed to irq 10 found-> vendor=0x8086, dev=0x24c2, revid=0x03 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[20]: type 4, range 32, base 00001820, size 5, enabled pcib0: matched entry for 0.29.INTB (source \_SB_.PCI0.LPC0.LNKD) pcib0: slot 29 INTB is routed to irq 5 found-> vendor=0x8086, dev=0x24c4, revid=0x03 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=5 map[20]: type 4, range 32, base 00001840, size 5, enabled pcib0: matched entry for 0.29.INTC (source \_SB_.PCI0.LPC0.LNKC) pcib0: slot 29 INTC is routed to irq 10 found-> vendor=0x8086, dev=0x24c7, revid=0x03 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=10 map[10]: type 1, range 32, base d0000000, size 10, enabled pcib0: matched entry for 0.29.INTD (source \_SB_.PCI0.LPC0.LNKH) pcib0: slot 29 INTD is routed to irq 10 found-> vendor=0x8086, dev=0x24cd, revid=0x03 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x2448, revid=0x83 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x8080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x24cc, revid=0x03 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 00000000, size 3, enabled map[14]: type 4, range 32, base 00000000, size 2, enabled map[18]: type 4, range 32, base 00000000, size 3, enabled map[1c]: type 4, range 32, base 00000000, size 2, enabled map[20]: type 4, range 32, base 00001860, size 4, enabled found-> vendor=0x8086, dev=0x24ca, revid=0x03 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 map[20]: type 4, range 32, base 00001880, size 5, enabled pcib0: matched entry for 0.31.INTB (source \_SB_.PCI0.LPC0.LNKB) pcib0: slot 31 INTB is routed to irq 10 found-> vendor=0x8086, dev=0x24c3, revid=0x03 bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 map[10]: type 4, range 32, base 00001c00, size 8, enabled map[14]: type 4, range 32, base 000018c0, size 6, enabled map[18]: type 1, range 32, base d0000c00, size 9, enabled map[1c]: type 1, range 32, base d0000800, size 8, enabled pcib0: matched entry for 0.31.INTB (source \_SB_.PCI0.LPC0.LNKB) pcib0: slot 31 INTB is routed to irq 10 found-> vendor=0x8086, dev=0x24c5, revid=0x03 bus=0, slot=31, func=5 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00002400, size 8, enabled map[14]: type 4, range 32, base 00002000, size 7, enabled pcib0: matched entry for 0.31.INTB (source \_SB_.PCI0.LPC0.LNKB) pcib0: slot 31 INTB is routed to irq 10 found-> vendor=0x8086, dev=0x24c6, revid=0x03 bus=0, slot=31, func=6 class=07-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=10 powerspec 2 supports D0 D3 current D0 agp0: mem 0xe0000000-0xefffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 256M pcib1: at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0x3000-0x3fff pcib1: memory decode 0xd0100000-0xd01fffff pcib1: prefetched decode 0xd8000000-0xdfffffff ---- initial configuration ------------------------ \_SB_.PCI0.LPC0.LNKA irq 10: [ 10] low,level,sharable 1.0.0 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \_SB_.PCI0.LPC0.LNKA irq 10: [ 10] low,level,sharable 1.0.0 pci1: on pcib1 pci1: physical bus=1 map[10]: type 3, range 32, base d8000000, size 27, enabled map[14]: type 4, range 32, base 00003000, size 8, enabled map[18]: type 1, range 32, base d0103000, size 16, enabled pcib1: matched entry for 1.0.INTA (source \_SB_.PCI0.LPC0.LNKA) pcib1: slot 0 INTA is routed to irq 10 found-> vendor=0x1002, dev=0x4c66, revid=0x01 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0387, statreg=0x02b0, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 pci1: at device 0.0 (no driver attached) uhci0: port 0x1800-0x181f irq 10 at device 29.0 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x1820-0x183f irq 5 at device 29.1 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ums0: Cherry Mikroschalter product 0x000c rev 1.10/8.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. uhci2: port 0x1840-0x185f irq 10 at device 29.2 on pci0 usb2: on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: at device 29.7 (no driver attached) pcib2: at device 30.0 on pci0 pcib2: secondary bus 2 pcib1: subordinate bus 2 pcib1: I/O decode 0x4000-0x4fff pcib1: memory decode 0xd0200000-0xd05fffff pcib1: prefetched decode 0xfff00000-0xfffff ---- initial configuration ------------------------ \_SB_.PCI0.LPC0.LNKD irq 5: [ 5] low,level,sharable 2.2.0 \_SB_.PCI0.LPC0.LNKE irq 10: [ 3 4 5 7 9 11 12] low,level,sharable 2.4.0 \_SB_.PCI0.LPC0.LNKF irq 0: [ 3 4 5 7 9 11 12] low,level,sharable 2.4.1 \_SB_.PCI0.LPC0.LNKB irq 10: [ 10] low,level,sharable 2.6.0 \_SB_.PCI0.LPC0.LNKC irq 10: [ 10] low,level,sharable 2.7.0 ---- before setting priority for links ------------ \_SB_.PCI0.LPC0.LNKF: interrupts: 3 4 5 7 9 11 12 penalty: 1110 1110 510 1110 110 110 1110 references: 1 priority: 0 ---- before fixup boot-disabled links ------------- \_SB_.PCI0.LPC0.LNKF: interrupts: 3 4 5 7 9 11 12 penalty: 1110 1110 510 1110 110 110 1110 references: 1 priority: 738 ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \_SB_.PCI0.LPC0.LNKD irq 5: [ 5] low,level,sharable 2.2.0 \_SB_.PCI0.LPC0.LNKE irq 10: [ 3 4 5 7 9 11 12] low,level,sharable 2.4.0 \_SB_.PCI0.LPC0.LNKF irq 11: [ 3 4 5 7 9 11 12] low,level,sharable 2.4.1 \_SB_.PCI0.LPC0.LNKB irq 10: [ 10] low,level,sharable 2.6.0 \_SB_.PCI0.LPC0.LNKC irq 10: [ 10] low,level,sharable 2.7.0 pci2: on pcib2 pci2: physical bus=2 map[10]: type 1, range 32, base d0204000, size 13, enabled pcib2: matched entry for 2.2.INTA (source \_SB_.PCI0.LPC0.LNKD) pcib2: slot 2 INTA is routed to irq 5 found-> vendor=0x14e4, dev=0x4401, revid=0x01 bus=2, slot=2, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d0206000, size 12, enabled pcib2: matched entry for 2.4.INTA (source \_SB_.PCI0.LPC0.LNKE) pcib2: slot 4 INTA is routed to irq 5 found-> vendor=0x8086, dev=0x1043, revid=0x04 bus=2, slot=4, func=0 class=02-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x22 (8500 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 map[10]: type 1, range 32, base d0207000, size 12, enabled found-> vendor=0x1217, dev=0x7114, revid=0x20 bus=2, slot=6, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0187, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 found-> vendor=0x1217, dev=0x7114, revid=0x20 bus=2, slot=6, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0080, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d0208000, size 12, enabled pcib2: matched entry for 2.6.INTA (source \_SB_.PCI0.LPC0.LNKB) pcib2: slot 6 INTA is routed to irq 10 found-> vendor=0x1217, dev=0x7110, revid=0x00 bus=2, slot=6, func=2 class=08-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0103, statreg=0x0410, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base d0209000, size 11, enabled map[14]: type 1, range 32, base d0200000, size 14, enabled pcib2: matched entry for 2.7.INTA (source \_SB_.PCI0.LPC0.LNKC) pcib2: slot 7 INTA is routed to irq 10 found-> vendor=0x104c, dev=0x8026, revid=0x00 bus=2, slot=7, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 bfe0: mem 0xd0204000-0xd0205fff irq 5 at device 2.0 on pci2 pcib2: device bfe0 requested decoded memory range 0xd0204000-0xd0205fff bfe0: Ethernet address: 00:c0:9f:24:ac:fd miibus0: on bfe0 bmtphy0: on miibus0 bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto bfe0: bpf attached pci2: at device 4.0 (no driver attached) cbb0: mem 0xd0207000-0xd0207fff at device 6.0 on pci2 pcib2: device cbb0 requested decoded memory range 0xd0207000-0xd0207fff cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 pcib2: matched entry for 2.6.INTA (source \_SB_.PCI0.LPC0.LNKB) pcib2: slot 6 INTA is routed to irq 10 cbb0: [MPSAFE] cbb0: PCI Configuration space: 0x00: 0x71141217 0x04100187 0x06070020 0x00824000 0x10: 0xd0207000 0x020000a0 0x40000002 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd 0x30: 0x00000001 0x0000fffd 0x00000001 0x0740010a 0x40: 0x001f1025 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x018c1882 0x90: 0x02250003 0x00000000 0x00000000 0x00000000 0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000009 0xb0: 0xfe020001 0x00c04000 0x00000000 0x00000009 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x08004000 0x80810bea 0x00000000 0x00400000 0xe0: 0x00820001 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 cbb1: at device 6.1 on pci2 pcib2: device cbb1 requested decoded memory range 0xd0200000-0xd05fffff cardbus1: on cbb1 pccard1: <16-bit PCCard bus> on cbb1 pcib2: matched entry for 2.6.INTA (source \_SB_.PCI0.LPC0.LNKB) pcib2: slot 6 INTA is routed to irq 10 cbb1: [MPSAFE] cbb1: PCI Configuration space: 0x00: 0x71141217 0x04180087 0x06070020 0x00822000 0x10: 0xd0200000 0x020000a0 0x20000000 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd 0x30: 0x00000001 0x0000fffd 0x00000001 0x0400010a 0x40: 0x001f1025 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x00000000 0x00000000 0x00000000 0x018c1882 0x90: 0x02250003 0x00000000 0x00000000 0x00000000 0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000008 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x08004000 0x80820bea 0x00000000 0x10400000 0xe0: 0x00820001 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000 pci2: at device 6.2 (no driver attached) fwohci0: vendor=104c, dev=8026 fwohci0: <1394 Open Host Controller Interface> mem 0xd0200000-0xd0203fff,0xd0209000-0xd02097ff irq 10 at device 7.0 on pci2 fwohci0: latency timer 64 -> 64. fwohci0: cache size 8 -> 8. pcib2: device fwohci0 requested decoded memory range 0xd0209000-0xd02097ff fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:c0:9f:00:00:0a:5b:31 fwohci0: resetting OHCI...done (loop=0) fwohci0: fwphy_rddata: 0x2 loop=0, retry=0 fwohci0: phy read failed(2). fwohci0: fwphy_rddata: 0x3 loop=0, retry=1 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: fwphy_rddata: 0x5 loop=0, retry=0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: 0x5 loop=0, retry=0 fwohci0: fwphy_rddata: 0x2 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0xa002 -> 0xf800a002 fwohci0: fwohci_set_intr: 1 firewire0: on fwohci0 fwe0: on firewire0 if_fwe0: Fake Ethernet address: 02:c0:9f:0a:5b:31 fwe0: bpf attached sbp0: on firewire0 sbp_attach (cold=1) fwohci0: Initiate bus reset fwohci0: fwphy_rddata: 0x1 loop=0, retry=0 fwohci0: fwphy_rddata: 0x1 loop=0, retry=0 fwohci0: BUS reset sbp_post_busreset fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) fwohci0: fw_set_bus_manager: 0->0 (loop=0) firewire0: bus manager 0 (me) send phy_config root_node=-1 gap_count=5 fwohci0: maxdesc: 2 fwohci0: start AT DMA status=0 isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x1860-0x186f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 ata0: reset tp1 mask=03 ostat0=50 ostat1=00 ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00 ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1 ata0: at 0x1f0 irq 14 on atapci0 ata0: [MPSAFE] ata1: reset tp1 mask=03 ostat0=50 ostat1=00 ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb ata1-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00 ata1: reset tp2 mask=03 stat0=10 stat1=00 devices=0x4 ata1: at 0x170 irq 15 on atapci0 ata1: [MPSAFE] pci0: at device 31.3 (no driver attached) pci0: at device 31.5 (no driver attached) pci0: at device 31.6 (no driver attached) acpi_lid0: on acpi0 acpi_acad0: on acpi0 acpi_cmbat0: on acpi0 acpi_cmbat1: on acpi0 acpi_button0: on acpi0 atkbdc0: port 0x64,0x60 irq 1 on acpi0 atkbd0: flags 0x1 irq 1 on atkbdc0 atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0x41ab (2) kbdc: RESET_KBD return code:00fa kbdc: RESET_KBD status:00aa kbd0 at atkbd0 kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000 psm0: unable to allocate IRQ psmcpnp0 irq12 on acpi0 psm0: current command byte:0047 kbdc: TEST_AUX_PORT status:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 kbdc: RESET_AUX return code:00fa kbdc: RESET_AUX status:00aa kbdc: RESET_AUX ID:0000 psm: status 00 02 64 psm: status 00 00 64 psm: status 00 03 64 psm: status 00 03 64 psm: data 08 00 00 psm: status 10 00 64 psm: status 00 02 64 psm: data 08 00 00 psm: status 00 02 64 psm0: irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons psm0: config:00000000, flags:00000000, packet size:3 psm0: syncmask:c0, syncbits:00 unknown: not probed (disabled) acpi_ec0: port 0x66,0x62 on acpi0 ppc0: using extended I/O port range ppc0: ECP SPP SPP ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: on ppc0 plip0: on ppbus0 plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) sio0: irq maps: 0x401 0x411 0x401 0x401 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: irq maps: 0x401 0x409 0x401 0x401 sio1 port 0x2f8-0x2ff irq 3 drq 1 on acpi0 sio1: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff unknown: status reg test failed ff sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: