From owner-freebsd-scsi@FreeBSD.ORG Tue May 4 18:14:07 2010 Return-Path: Delivered-To: freebsd-scsi@freebsd.org Received: from mx1.freebsd.org (mx1.freebsd.org [69.147.83.52]) by hub.freebsd.org (Postfix) with ESMTP id 9E3201065672 for ; Tue, 4 May 2010 18:14:07 +0000 (UTC) (envelope-from scottl@samsco.org) Received: from pooker.samsco.org (pooker.samsco.org [168.103.85.57]) by mx1.freebsd.org (Postfix) with ESMTP id B24748FC20 for ; Tue, 4 May 2010 18:14:06 +0000 (UTC) Received: from [127.0.0.1] (pooker.samsco.org [168.103.85.57]) (authenticated bits=0) by pooker.samsco.org (8.14.3/8.14.3) with ESMTP id o44IDwvr043584; Tue, 4 May 2010 12:13:58 -0600 (MDT) (envelope-from scottl@samsco.org) Mime-Version: 1.0 (Apple Message framework v1078) Content-Type: text/plain; charset=utf-8 From: Scott Long In-Reply-To: <201005041800.o44I08d4017511@freefall.freebsd.org> Date: Tue, 4 May 2010 12:13:58 -0600 Content-Transfer-Encoding: quoted-printable Message-Id: References: <201005041800.o44I08d4017511@freefall.freebsd.org> To: Per olof Ljungmark X-Mailer: Apple Mail (2.1078) X-Spam-Status: No, score=-1.0 required=3.8 tests=ALL_TRUSTED, T_RP_MATCHES_RCVD autolearn=unavailable version=3.3.0 X-Spam-Checker-Version: SpamAssassin 3.3.0 (2010-01-18) on pooker.samsco.org Cc: freebsd-scsi@freebsd.org Subject: Re: kern/146287: [ciss] ciss(4) cannot see more than one SmartArray controller X-BeenThere: freebsd-scsi@freebsd.org X-Mailman-Version: 2.1.5 Precedence: list List-Id: SCSI subsystem List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , X-List-Received-Date: Tue, 04 May 2010 18:14:07 -0000 If you can install and boot to the first controller, please run "pciconf = -lv" and send me the output. I looks like the linux driver might have a = wildcard entry for these controllers, but I want to make sure that I = have all of the information before I do something similar for FreeBSD. Thanks, Scott On May 4, 2010, at 12:00 PM, Per olof Ljungmark wrote: > The following reply was made to PR kern/146287; it has been noted by = GNATS. >=20 > From: Per olof Ljungmark > To: bug-followup@FreeBSD.org, peo@intersonic.se > Cc: seanbru@yahoo-inc.com > Subject: Re: kern/146287: [ciss] ciss(4) cannot see more than one = SmartArray > controller > Date: Tue, 04 May 2010 19:56:19 +0200 >=20 > Copyright (c) 1992-2009 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, = 1994 > The Regents of the University of California. All rights = reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 8.0-RELEASE-p2 #0: Tue May 4 00:23:37 CEST 2010 > peo@lowell.i.inter-sonic.com:/usr/obj/usr/src/sys/GENERIC > Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80e1a000. > Timecounter "i8254" frequency 1193182 Hz quality 0 > Calibrating TSC clock ... TSC clock: 3400136791 Hz > CPU: Intel(R) Xeon(TM) CPU 3.40GHz (3400.14-MHz K8-class CPU) > Origin =3D "GenuineIntel" Id =3D 0xf41 Stepping =3D 1 >=20 > = Features=3D0xbfebfbff > Features2=3D0x649d > AMD Features=3D0x20000800 > TSC: P-state invariant > real memory =3D 12884901888 (12288 MB) > Physical memory chunk(s): > 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) > 0x0000000000e51000 - 0x00000000dfff2fff, 3743031296 bytes (913826 = pages) > 0x0000000100000000 - 0x00000003049d6fff, 8667361280 bytes (2116055 = pages) > avail memory =3D 12349284352 (11777 MB) > ACPI APIC Table: > INTR: Adding local APIC 6 as a target > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > FreeBSD/SMP: 2 package(s) x 1 core(s) x 2 HTT threads > cpu0 (BSP): APIC ID: 0 > cpu1 (AP/HT): APIC ID: 1 > cpu2 (AP): APIC ID: 6 > cpu3 (AP/HT): APIC ID: 7 > APIC: CPU 0 has ACPI ID 0 > APIC: CPU 1 has ACPI ID 1 > APIC: CPU 2 has ACPI ID 6 > APIC: CPU 3 has ACPI ID 7 > ULE: setup cpu 0 > ULE: setup cpu 1 > ULE: setup cpu 2 > ULE: setup cpu 3 > ACPI: RSDP 0xf4f00 00024 (v2 HP ) > ACPI: XSDT 0xdfff3300 0004C (v1 HP P51 00000002 =EF=BF=BD\^D = 0000162E) > ACPI: FACP 0xdfff3380 000F4 (v3 HP P51 00000002 =EF=BF=BD\^D = 0000162E) > ACPI Warning: Invalid length for Pm1aControlBlock: 32, using default = 16 > 20090521 tbfadt-707 > ACPI: DSDT 0xdfff3480 02DAB (v1 HP DSDT 00000001 INTL = 20030228) > ACPI: FACS 0xdfff3100 00040 > ACPI: SPCR 0xdfff3140 00050 (v1 HP SPCRRBSU 00000001 =EF=BF=BD\^D = 0000162E) > ACPI: MCFG 0xdfff31c0 0003C (v1 HP ProLiant 00000001 = 00000000) > ACPI: APIC 0xdfff3200 000C2 (v1 HP 00000083 00000002 = 00000000) > ACPI: SSDT 0xdfff8000 004C9 (v1 HP SSDTP 00000001 INTL = 20030228) > MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000 > ioapic0: Routing external 8259A's -> intpin 0 > MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec80000 > MADT: Found IO APIC ID 10, Interrupt 48 at 0xfec80400 > MADT: Found IO APIC ID 11, Interrupt 72 at 0xfec84000 > MADT: Found IO APIC ID 12, Interrupt 96 at 0xfec84400 > MADT: Interrupt override: source 0, irq 2 > ioapic0: Routing IRQ 0 -> intpin 2 > MADT: Interrupt override: source 9, irq 9 > ioapic0: intpin 9 trigger: level > lapic: Routing NMI -> LINT1 > lapic: LINT1 trigger: edge > lapic: LINT1 polarity: high > ioapic0 irqs 0-23 on motherboard > ioapic1 irqs 24-47 on motherboard > ioapic2 irqs 48-71 on motherboard > ioapic3 irqs 72-95 on motherboard > ioapic4 irqs 96-119 on motherboard > cpu0 BSP: > ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000100ef therm: 0x00010000 err: 0x000100f0 pcm: 0x00010400 > wlan: <802.11 Link Layer> > null: > random: > nfslock: pseudo-device > kbd: new array size 4 > kbd1 at kbdmux0 > mem: > io: > hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 > acpi0: on motherboard > PCIe: Memory Mapped configuration base @ 0xe0000000 > ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48 > acpi0: [MPSAFE] > acpi0: [ITHREAD] > acpi0: Power Button (fixed) > acpi0: wakeup code va 0xffffff8000025000 pa 0x4000 > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: \\_SB_.PCI0.CFG0.MEM0 -> bus 0 dev 0 func 0 > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: \\_SB_.PCI0.PTC0.PCXC.SHP0 -> bus 5 dev 0 func 0 > acpi_bus_number: root bus has no _BBN, assuming 0 > AcpiOsDerivePciId: \\_SB_.PCI0.IBRG.ICH5 -> bus 0 dev 31 func 0 > ACPI timer: 0/397 0/5 0/5 0/5 0/6 0/5 0/5 0/6 0/5 0/4 -> 0 > Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x908-0x90b on acpi0 > pci_link0: Index IRQ Rtd Ref IRQs > Initial Probe 0 5 N 0 5 7 10 11 > Validation 0 5 N 0 5 7 10 11 > After Disable 0 255 N 0 5 7 10 11 > pci_link1: Index IRQ Rtd Ref IRQs > Initial Probe 0 7 N 0 5 7 10 11 > Validation 0 7 N 0 5 7 10 11 > After Disable 0 255 N 0 5 7 10 11 > pci_link2: Index IRQ Rtd Ref IRQs > Initial Probe 0 7 N 0 5 7 10 11 > Validation 0 7 N 0 5 7 10 11 > After Disable 0 255 N 0 5 7 10 11 > pci_link3: Index IRQ Rtd Ref IRQs > Initial Probe 0 5 N 0 5 7 10 11 > Validation 0 5 N 0 5 7 10 11 > After Disable 0 255 N 0 5 7 10 11 > pci_link4: Index IRQ Rtd Ref IRQs > Initial Probe 0 255 N 0 5 7 10 11 > Validation 0 255 N 0 5 7 10 11 > After Disable 0 255 N 0 5 7 10 11 > pci_link5: Index IRQ Rtd Ref IRQs > Initial Probe 0 5 N 0 5 7 10 11 > Validation 0 5 N 0 5 7 10 11 > After Disable 0 255 N 0 5 7 10 11 > pci_link6: Index IRQ Rtd Ref IRQs > Initial Probe 0 5 N 0 5 7 10 11 > Validation 0 5 N 0 5 7 10 11 > After Disable 0 255 N 0 5 7 10 11 > pci_link7: Index IRQ Rtd Ref IRQs > Initial Probe 0 5 N 0 5 7 10 11 > Validation 0 5 N 0 5 7 10 11 > After Disable 0 255 N 0 5 7 10 11 > pcib0: on acpi0 > pci0: on pcib0 > pci0: domain=3D0, physical bus=3D0 > found-> vendor=3D0x8086, dev=3D0x3590, revid=3D0x0c > domain=3D0, bus=3D0, slot=3D0, func=3D0 > class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1 > cmdreg=3D0x0146, statreg=3D0x0090, cachelnsz=3D0 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) > found-> vendor=3D0x8086, dev=3D0x3595, revid=3D0x0c > domain=3D0, bus=3D0, slot=3D2, func=3D0 > class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 > cmdreg=3D0x0147, statreg=3D0x0010, cachelnsz=3D16 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x00 = (0 ns) > intpin=3Da, irq=3D255 > powerspec 2 supports D0 D3 current D0 > MSI supports 2 messages > found-> vendor=3D0x8086, dev=3D0x3599, revid=3D0x0c > domain=3D0, bus=3D0, slot=3D6, func=3D0 > class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 > cmdreg=3D0x0147, statreg=3D0x0010, cachelnsz=3D16 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x00 = (0 ns) > intpin=3Da, irq=3D255 > powerspec 2 supports D0 D3 current D0 > MSI supports 2 messages > found-> vendor=3D0x8086, dev=3D0x24d2, revid=3D0x02 > domain=3D0, bus=3D0, slot=3D29, func=3D0 > class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D1 > cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) > intpin=3Da, irq=3D5 > map[20]: type I/O Port, range 32, base 0x3000, size 5, enabled > pcib0: matched entry for 0.29.INTA > pcib0: slot 29 INTA hardwired to IRQ 16 > found-> vendor=3D0x8086, dev=3D0x24d4, revid=3D0x02 > domain=3D0, bus=3D0, slot=3D29, func=3D1 > class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 > cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) > intpin=3Db, irq=3D5 > map[20]: type I/O Port, range 32, base 0x3020, size 5, enabled > pcib0: matched entry for 0.29.INTB > pcib0: slot 29 INTB hardwired to IRQ 19 > found-> vendor=3D0x8086, dev=3D0x24d7, revid=3D0x02 > domain=3D0, bus=3D0, slot=3D29, func=3D2 > class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 > cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) > intpin=3Dc, irq=3D7 > map[20]: type I/O Port, range 32, base 0x3040, size 5, enabled > pcib0: matched entry for 0.29.INTC > pcib0: slot 29 INTC hardwired to IRQ 18 > found-> vendor=3D0x8086, dev=3D0x24de, revid=3D0x02 > domain=3D0, bus=3D0, slot=3D29, func=3D3 > class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0 > cmdreg=3D0x0005, statreg=3D0x0280, cachelnsz=3D0 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) > intpin=3Da, irq=3D5 > map[20]: type I/O Port, range 32, base 0x3060, size 5, enabled > pcib0: matched entry for 0.29.INTA > pcib0: slot 29 INTA hardwired to IRQ 16 > found-> vendor=3D0x8086, dev=3D0x24dd, revid=3D0x02 > domain=3D0, bus=3D0, slot=3D29, func=3D7 > class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D0 > cmdreg=3D0x0106, statreg=3D0x0290, cachelnsz=3D0 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) > intpin=3Dd, irq=3D5 > powerspec 2 supports D0 D3 current D0 > map[10]: type Memory, range 32, base 0xfbef0000, size 10, = enabled > pcib0: matched entry for 0.29.INTD > pcib0: slot 29 INTD hardwired to IRQ 23 > found-> vendor=3D0x8086, dev=3D0x244e, revid=3D0xc2 > domain=3D0, bus=3D0, slot=3D30, func=3D0 > class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 > cmdreg=3D0x0147, statreg=3D0x0080, cachelnsz=3D0 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x00 = (0 ns) > found-> vendor=3D0x8086, dev=3D0x24d0, revid=3D0x02 > domain=3D0, bus=3D0, slot=3D31, func=3D0 > class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1 > cmdreg=3D0x014f, statreg=3D0x0280, cachelnsz=3D0 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) > found-> vendor=3D0x8086, dev=3D0x24db, revid=3D0x02 > domain=3D0, bus=3D0, slot=3D31, func=3D1 > class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0 > cmdreg=3D0x0005, statreg=3D0x0288, cachelnsz=3D0 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) > intpin=3Da, irq=3D255 > map[20]: type I/O Port, range 32, base 0x500, size 4, enabled > map[24]: type Memory, range 32, base 0, size 10, memory = disabled > pcib1: at device 2.0 on pci0 > pcib1: domain 0 > pcib1: secondary bus 2 > pcib1: subordinate bus 4 > pcib1: I/O decode 0x4000-0x4fff > pcib1: memory decode 0xfdd00000-0xfdefffff > pcib1: no prefetched decode > pci2: on pcib1 > pci2: domain=3D0, physical bus=3D2 > found-> vendor=3D0x8086, dev=3D0x0329, revid=3D0x09 > domain=3D0, bus=3D2, slot=3D0, func=3D0 > class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 > cmdreg=3D0x0147, statreg=3D0x0010, cachelnsz=3D16 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x00 = (0 ns) > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > found-> vendor=3D0x8086, dev=3D0x032a, revid=3D0x09 > domain=3D0, bus=3D2, slot=3D0, func=3D2 > class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 > cmdreg=3D0x0147, statreg=3D0x0010, cachelnsz=3D16 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x00 = (0 ns) > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > pcib2: at device 0.0 on pci2 > pcib2: domain 0 > pcib2: secondary bus 3 > pcib2: subordinate bus 3 > pcib2: I/O decode 0xf000-0xfff > pcib2: memory decode 0xfdd00000-0xfddfffff > pcib2: no prefetched decode > pci3: on pcib2 > pci3: domain=3D0, physical bus=3D3 > found-> vendor=3D0x14e4, dev=3D0x1648, revid=3D0x10 > domain=3D0, bus=3D3, slot=3D1, func=3D0 > class=3D02-00-00, hdrtype=3D0x00, mfdev=3D1 > cmdreg=3D0x0156, statreg=3D0x02b0, cachelnsz=3D16 (dwords) > lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), = maxlat=3D0x00 (0 ns) > intpin=3Da, irq=3D7 > powerspec 2 supports D0 D3 current D0 > MSI supports 8 messages, 64 bit > map[10]: type Memory, range 64, base 0xfddf0000, size 16, = enabled > pcib2: requested memory range 0xfddf0000-0xfddfffff: good > pcib1: requested memory range 0xfddf0000-0xfddfffff: good > pcib2: matched entry for 3.1.INTA > pcib2: slot 1 INTA hardwired to IRQ 25 > found-> vendor=3D0x14e4, dev=3D0x1648, revid=3D0x10 > domain=3D0, bus=3D3, slot=3D1, func=3D1 > class=3D02-00-00, hdrtype=3D0x00, mfdev=3D1 > cmdreg=3D0x0156, statreg=3D0x02b0, cachelnsz=3D16 (dwords) > lattimer=3D0x40 (1920 ns), mingnt=3D0x40 (16000 ns), = maxlat=3D0x00 (0 ns) > intpin=3Db, irq=3D7 > powerspec 2 supports D0 D3 current D0 > MSI supports 8 messages, 64 bit > map[10]: type Memory, range 64, base 0xfdde0000, size 16, = enabled > pcib2: requested memory range 0xfdde0000-0xfddeffff: good > pcib1: requested memory range 0xfdde0000-0xfddeffff: good > pcib2: matched entry for 3.1.INTB > pcib2: slot 1 INTB hardwired to IRQ 26 > pci0:3:1:0: bad VPD cksum, remain 19 > bge0: mem > 0xfddf0000-0xfddfffff irq 25 at device 1.0 on pci3 > bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfddf0000 > bge0: CHIP ID 0x21000000; ASIC REV 0x02; CHIP REV 0x21; PCI-X > miibus0: on bge0 > brgphy0: PHY 1 on miibus0 > brgphy0: OUI 0x000818, model 0x0019, rev. 0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > bge0: bpf attached > bge0: Ethernet address: 00:12:79:d1:2e:2d > ioapic1: routing intpin 1 (PCI IRQ 25) to lapic 0 vector 49 > bge0: [MPSAFE] > bge0: [ITHREAD] > pci0:3:1:1: bad VPD cksum, remain 19 > bge1: mem > 0xfdde0000-0xfddeffff irq 26 at device 1.1 on pci3 > bge1: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfdde0000 > bge1: CHIP ID 0x21000000; ASIC REV 0x02; CHIP REV 0x21; PCI-X > miibus1: on bge1 > brgphy1: PHY 1 on miibus1 > brgphy1: OUI 0x000818, model 0x0019, rev. 0 > brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-FDX, auto > bge1: bpf attached > bge1: Ethernet address: 00:12:79:d1:2e:2c > ioapic1: routing intpin 2 (PCI IRQ 26) to lapic 0 vector 50 > bge1: [MPSAFE] > bge1: [ITHREAD] > pcib3: at device 0.2 on pci2 > pcib3: domain 0 > pcib3: secondary bus 4 > pcib3: subordinate bus 4 > pcib3: I/O decode 0x4000-0x4fff > pcib3: memory decode 0xfde00000-0xfdefffff > pcib3: no prefetched decode > pci4: on pcib3 > pci4: domain=3D0, physical bus=3D4 > found-> vendor=3D0x0e11, dev=3D0x0046, revid=3D0x01 > domain=3D0, bus=3D4, slot=3D3, func=3D0 > class=3D01-04-00, hdrtype=3D0x00, mfdev=3D0 > cmdreg=3D0x0157, statreg=3D0x0230, cachelnsz=3D16 (dwords) > lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) > intpin=3Da, irq=3D5 > powerspec 2 supports D0 D1 D3 current D0 > map[10]: type Memory, range 64, base 0xfdef0000, size 13, = enabled > pcib3: requested memory range 0xfdef0000-0xfdef1fff: good > pcib1: requested memory range 0xfdef0000-0xfdef1fff: good > map[18]: type I/O Port, range 32, base 0x4000, size 8, enabled > pcib3: requested I/O range 0x4000-0x40ff: in range > pcib1: requested I/O range 0x4000-0x40ff: in range > map[1c]: type Memory, range 64, base 0xfde80000, size 18, = enabled > pcib3: requested memory range 0xfde80000-0xfdebffff: good > pcib1: requested memory range 0xfde80000-0xfdebffff: good > pcib3: matched entry for 4.3.INTA > pcib3: slot 3 INTA hardwired to IRQ 51 > ciss0: port 0x4000-0x40ff mem > 0xfdef0000-0xfdef1fff,0xfde80000-0xfdebffff irq 51 at device 3.0 on = pci4 > ciss0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xfdef0000 > ciss0: PERFORMANT Transport > ciss0: got 0 MSI messages] > ioapic2: routing intpin 3 (PCI IRQ 51) to lapic 0 vector 51 > ciss0: [MPSAFE] > ciss0: [ITHREAD] > ciss0: using 256 of 1024 available commands > ciss0: firmware 2.84 > ciss0: 2 SCSI channels > ciss0: signature 'CISS' > ciss0: valence 1 > ciss0: supported I/O methods 0x80000006 > ciss0: active I/O method 0x5 > ciss0: 4G page base 0x00000000 > ciss0: interrupt coalesce delay 0us > ciss0: interrupt coalesce count 16 > ciss0: max outstanding commands 1024 > ciss0: bus types 0x4 > ciss0: server name '' > ciss0: heartbeat 0x5c > ciss0: 6 physical devices > ciss0: 1 logical drive > ciss0: logical drive (b0t0): RAID 1, 139776MB online > pcib4: at device 6.0 on pci0 > pcib4: domain 0 > pcib4: secondary bus 5 > pcib4: subordinate bus 12 > pcib4: I/O decode 0x5000-0x5fff > pcib4: memory decode 0xfdf00000-0xfdffffff > pcib4: no prefetched decode > pci5: on pcib4 > pci5: domain=3D0, physical bus=3D5 > found-> vendor=3D0x8086, dev=3D0x0329, revid=3D0x09 > domain=3D0, bus=3D5, slot=3D0, func=3D0 > class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 > cmdreg=3D0x0147, statreg=3D0x0010, cachelnsz=3D16 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x00 = (0 ns) > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > found-> vendor=3D0x8086, dev=3D0x032a, revid=3D0x09 > domain=3D0, bus=3D5, slot=3D0, func=3D2 > class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1 > cmdreg=3D0x0147, statreg=3D0x0010, cachelnsz=3D16 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x00 = (0 ns) > powerspec 2 supports D0 D3 current D0 > MSI supports 1 message, 64 bit > pcib5: at device 0.0 on pci5 > pcib5: domain 0 > pcib5: secondary bus 6 > pcib5: subordinate bus 9 > pcib5: I/O decode 0x5000-0x5fff > pcib5: memory decode 0xfdf00000-0xfdffffff > pcib5: no prefetched decode > pci6: on pcib5 > pci6: domain=3D0, physical bus=3D6 > found-> vendor=3D0x1014, dev=3D0x01a7, revid=3D0x02 > domain=3D0, bus=3D6, slot=3D2, func=3D0 > class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0 > cmdreg=3D0x0147, statreg=3D0x0230, cachelnsz=3D16 (dwords) > lattimer=3D0x40 (1920 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x00 = (0 ns) > powerspec 2 supports D0 D3 current D0 > pcib6: at device 2.0 on pci6 > pcib6: domain 0 > pcib6: secondary bus 7 > pcib6: subordinate bus 7 > pcib6: I/O decode 0x5000-0x5fff > pcib6: memory decode 0xfdf00000-0xfdffffff > pcib6: no prefetched decode > device_attach: pcib6 attach returned 6 > pcib7: at device 0.2 on pci5 > pcib7: domain 0 > pcib7: secondary bus 10 > pcib7: subordinate bus 12 > pcib7: I/O decode 0xf000-0xfff > pcib7: no prefetched decode > pci10: on pcib7 > pci10: domain=3D0, physical bus=3D10 > uhci0: port 0x3000-0x301f > irq 16 at device 29.0 on pci0 > uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3000 > ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 52 > uhci0: [MPSAFE] > uhci0: [ITHREAD] > uhci0: LegSup =3D 0x003b > usbus0: on uhci0 > uhci1: port 0x3020-0x303f > irq 19 at device 29.1 on pci0 > uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3020 > ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 53 > uhci1: [MPSAFE] > uhci1: [ITHREAD] > uhci1: LegSup =3D 0x0010 > usbus1: on uhci1 > uhci2: port 0x3040-0x305f > irq 18 at device 29.2 on pci0 > uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3040 > ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 54 > uhci2: [MPSAFE] > uhci2: [ITHREAD] > uhci2: LegSup =3D 0x0010 > usbus2: on uhci2 > uhci3: port 0x3060-0x307f > irq 16 at device 29.3 on pci0 > uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0x3060 > uhci3: [MPSAFE] > uhci3: [ITHREAD] > uhci3: LegSup =3D 0x0010 > usbus3: on uhci3 > ehci0: mem > 0xfbef0000-0xfbef03ff irq 23 at device 29.7 on pci0 > ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfbef0000 > ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 55 > ehci0: [MPSAFE] > ehci0: [ITHREAD] > usbus4: EHCI version 1.0 > usbus4: on ehci0 > pcib8: at device 30.0 on pci0 > pcib8: domain 0 > pcib8: secondary bus 1 > pcib8: subordinate bus 1 > pcib8: I/O decode 0x1000-0x2fff > pcib8: memory decode 0xfbf00000-0xfcffffff > pcib8: no prefetched decode > pcib8: Subtractively decoded bridge. > pci1: on pcib8 > pci1: domain=3D0, physical bus=3D1 > found-> vendor=3D0x1002, dev=3D0x4752, revid=3D0x27 > domain=3D0, bus=3D1, slot=3D3, func=3D0 > class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0 > cmdreg=3D0x0087, statreg=3D0x0290, cachelnsz=3D16 (dwords) > lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00= (0 ns) > powerspec 2 supports D0 D1 D2 D3 current D0 > map[10]: type Memory, range 32, base 0xfc000000, size 24, = enabled > pcib8: requested memory range 0xfc000000-0xfcffffff: good > map[14]: type I/O Port, range 32, base 0x2000, size 8, enabled > pcib8: requested I/O range 0x2000-0x20ff: in range > map[18]: type Memory, range 32, base 0xfbff0000, size 12, = enabled > pcib8: requested memory range 0xfbff0000-0xfbff0fff: good > found-> vendor=3D0x0e11, dev=3D0xb203, revid=3D0x01 > domain=3D0, bus=3D1, slot=3D4, func=3D0 > class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1 > cmdreg=3D0x0103, statreg=3D0x0290, cachelnsz=3D0 (dwords) > lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 = ns) > intpin=3Da, irq=3D5 > powerspec 2 supports D0 D3 current D0 > map[10]: type I/O Port, range 32, base 0x1800, size 8, enabled > pcib8: requested I/O range 0x1800-0x18ff: in range > map[14]: type Memory, range 32, base 0xfbfe0000, size 9, = enabled > pcib8: requested memory range 0xfbfe0000-0xfbfe01ff: good > pcib8: matched entry for 1.4.INTA > pcib8: slot 4 INTA hardwired to IRQ 21 > found-> vendor=3D0x0e11, dev=3D0xb204, revid=3D0x01 > domain=3D0, bus=3D1, slot=3D4, func=3D2 > class=3D08-80-00, hdrtype=3D0x00, mfdev=3D1 > cmdreg=3D0x0197, statreg=3D0x0290, cachelnsz=3D16 (dwords) > lattimer=3D0x40 (1920 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 = (0 ns) > intpin=3Db, irq=3D5 > powerspec 2 supports D0 D3 current D0 > map[10]: type I/O Port, range 32, base 0x2400, size 8, enabled > pcib8: requested I/O range 0x2400-0x24ff: in range > map[14]: type Memory, range 32, base 0xfbfd0000, size 11, = enabled > pcib8: requested memory range 0xfbfd0000-0xfbfd07ff: good > map[18]: type Memory, range 32, base 0xfbfc0000, size 13, = enabled > pcib8: requested memory range 0xfbfc0000-0xfbfc1fff: good > map[1c]: type Memory, range 32, base 0xfbf00000, size 19, = enabled > pcib8: requested memory range 0xfbf00000-0xfbf7ffff: good > pcib8: matched entry for 1.4.INTB > pcib8: slot 4 INTB hardwired to IRQ 22 > vgapci0: port 0x2000-0x20ff mem > 0xfc000000-0xfcffffff,0xfbff0000-0xfbff0fff at device 3.0 on pci1 > pci1: at device 4.0 (no driver attached) > pci1: at device 4.2 (no driver attached) > isab0: at device 31.0 on pci0 > isa0: on isab0 > atapci0: port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x500-0x50f at device 31.1 on pci0 > atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x500 > ata0: on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 > atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 > ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00 > ata0: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb > ata0: stat1=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00 > ata0: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x10000 > ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 56 > ata0: [MPSAFE] > ata0: [ITHREAD] > ata1: on atapci0 > atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 > atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 > ata1: reset tp1 mask=3D03 ostat0=3D00 ostat1=3D00 > ata1: stat0=3D0x01 err=3D0x01 lsb=3D0x01 msb=3D0x01 > ata1: stat1=3D0x01 err=3D0x01 lsb=3D0x01 msb=3D0x01 > ata1: reset tp2 stat0=3D01 stat1=3D01 devices=3D0x0 > ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 57 > ata1: [MPSAFE] > ata1: [ITHREAD] > acpi_tz0: on acpi0 > atkbdc0: port 0x60,0x64 irq 1 on acpi0 > atkbd0: irq 1 on atkbdc0 > atkbd: the current kbd controller command byte 0065 > atkbd: keyboard ID 0x41ab (2) > kbd0 at atkbd0 > kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000 > ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58 > atkbd0: [GIANT-LOCKED] > atkbd0: [ITHREAD] > psm0: unable to allocate IRQ > psmcpnp0: irq 12 on acpi0 > psm0: current command byte:0065 > psm0: irq 12 on atkbdc0 > ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 0 vector 59 > psm0: [GIANT-LOCKED] > psm0: [ITHREAD] > psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons > psm0: config:00000000, flags:00000008, packet size:3 > psm0: syncmask:c0, syncbits:00 > uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on = acpi0 > ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 60 > uart0: [FILTER] > uart0: fast interrupt > fdc0: port 0x3f2-0x3f5 irq 6 drq 2 on = acpi0 > fdc0: ic_type 90 part_id 73 > ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 61 > fdc0: [FILTER] > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > cpu0: on acpi0 > ACPI: SSDT 0xdfff9000 002DA (v1 HP SSDT0 00000001 INTL = 20030228) > cpu0: switching to generic Cx mode > acpi_perf0: on cpu0 > p4tcc0: on cpu0 > cpu1: on acpi0 > ACPI: SSDT 0xdfff9300 002DA (v1 HP SSDT1 00000001 INTL = 20030228) > est1: on cpu1 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 112d0000112d > device_attach: est1 attach returned 6 > p4tcc1: on cpu1 > cpu2: on acpi0 > ACPI: SSDT 0xdfff9600 002DA (v1 HP SSDT2 00000001 INTL = 20030228) > est2: on cpu2 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 112d0000112d > device_attach: est2 attach returned 6 > p4tcc2: on cpu2 > cpu3: on acpi0 > ACPI: SSDT 0xdfff9900 002DF (v1 HP SSDT3 00000001 INTL = 20030228) > est3: on cpu3 > est: CPU supports Enhanced Speedstep, but is not recognized. > est: cpu_vendor GenuineIntel, msr 112d0000112d > device_attach: est3 attach returned 6 > p4tcc3: on cpu3 > ahc_isa_probe 0: ioport 0xc00 alloc failed > ex_isa_identify() > isa_probe_children: disabling PnP devices > atkbdc: atkbdc0 already exists; skipping it > fdc: fdc0 already exists; skipping it > sc: sc0 already exists; skipping it > uart: uart0 already exists; skipping it > isa_probe_children: probing non-PnP devices > orm0: at iomem > 0xc0000-0xc7fff,0xc8000-0xcbfff,0xee000-0xeffff on isa0 > sc0: at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=3D0x300> > sc0: fb0, kbd1, terminal emulator: scteken (teken terminal) > vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on = isa0 > atrtc0: at port 0x70 irq 8 on isa0 > atrtc0: registered as a time-of-day clock (resolution 1000000us) > ppc0: cannot reserve I/O port range > ppc0: failed to probe at irq 7 on isa0 > uart1: at port 0x2f8-0x2ff > irq 3 on isa0 > ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 62 > uart1: [FILTER] > uart1: fast interrupt > isa_probe_children: probing PnP devices > Device configuration finished. > Reducing kern.maxvnodes 763673 -> 100000 > procfs registered > lapic: Divisor 2, Frequency 100004020 hz > Timecounter "TSC" frequency 3400136791 Hz quality -100 > Timecounters tick every 1.000 msec > lo0: bpf attached > hptrr: no controller detected. > ata0: Identifying devices: 00010000 > ata0: New devices: 00010000 > fdc0: output ready timeout > fdc0: output ready timeout > fdc0: output ready timeout > fdc0: output ready timeout > fdc0: output ready timeout > fdc0: output ready timeout > fdc0: output ready timeout > usbus0: 12Mbps Full Speed USB v1.0 > usbus1: 12Mbps Full Speed USB v1.0 > usbus2: 12Mbps Full Speed USB v1.0 > usbus3: 12Mbps Full Speed USB v1.0 > usbus4: 480Mbps High Speed USB v2.0 > ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire > acd0: setting PIO4 on ICH5 chip > acd0: setting UDMA33 on ICH5 chip > ugen0.1: at usbus0 > uhub0: on = usbus0 > ugen1.1: at usbus1 > uhub1: on = usbus1 > ugen2.1: at usbus2 > uhub2: on = usbus2 > ugen3.1: at usbus3 > uhub3: on = usbus3 > ugen4.1: at usbus4 > uhub4: on = usbus4 > acd0: CDRW drive at ata0 as = master > acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB = buffer, > UDMA33 > acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet > acd0: Writes: CDR, CDRW, test write, burnproof > acd0: Audio: play, 256 volume levels > acd0: Mechanism: ejectable tray, unlocked > acd0: Medium: no/blank disc > ata1: Identifying devices: 00000000 > ata1: New devices: 00000000 > uhub0: 2 ports with 2 removable, self powered > uhub1: 2 ports with 2 removable, self powered > uhub2: 2 ports with 2 removable, self powered > uhub3: 2 ports with 2 removable, self powered > fdc0: output ready timeout > fdc0: input ready timeout > fdc0: input ready timeout > fdc0: output ready timeout > fdc0: input ready timeout > fdc0: input ready timeout > fdc0: output ready timeout > fdc0: input ready timeout > fdc0: input ready timeout > fdc0: output ready timeout > fdc0: input ready timeout > fdc0: input ready timeout > da0 at ciss0 bus 0 target 0 lun 0 > da0: Fixed Direct Access SCSI-4 device > da0: 135.168MB/s transfers > da0: Command Queueing enabled > da0: 140002MB (286726080 512 byte sectors: 255H 32S/T 35138C) > pass0 at ciss0 bus 0 target 0 lun 0 > pass0: Fixed Direct Access SCSI-4 device > pass0: 135.168MB/s transfers > pass0: Command Queueing enabled > pass1 at ciss0 bus 33 target 0 lun 0 > pass1: Fixed Uninstalled SCSI-3 device > pass1: Serial Number 3KT5ABMQ000077052PVP > pass1: 135.168MB/s transfers > pass1: Command Queueing enabled > pass2 at ciss0 bus 33 target 1 lun 0 > pass2: Fixed Uninstalled SCSI-3 device > pass2: Serial Number 3KT65G0300009740UG3C > pass2: 135.168MB/s transfers > pass2: Command Queueing enabled > pass3 at ciss0 bus 33 target 2 lun 0 > pass3: Fixed Uninstalled SCSI-3 device > pass3: Serial Number 3KT65G7800009740W27L > pass3: 135.168MB/s transfers > pass3: Command Queueing enabled > pass4 at ciss0 bus 33 target 3 lun 0 > pass4: Fixed Uninstalled SCSI-3 device > pass4: Serial Number 3KT2W9ZB00007616NLEN > pass4: 135.168MB/s transfers > pass4: Command Queueing enabled > pass5 at ciss0 bus 33 target 4 lun 0 > pass5: Fixed Uninstalled SCSI-3 device > pass5: Serial Number 3KT18LBP0000754281N7 > pass5: 135.168MB/s transfers > pass5: Command Queueing enabled > pass6 at ciss0 bus 33 target 7 lun 0 > pass6: Fixed Processor SCSI-2 device > pass6: 135.168MB/s transfers > ATA PseudoRAID loaded > SMP: AP CPU #1 Launched! > cpu1 AP: > ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 > SMP: AP CPU #2 Launched! > cpu2 AP: > ID: 0x06000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 > SMP: AP CPU #3 Launched! > cpu3 AP: > ID: 0x07000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff > lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff > timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00010400 > ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 6 vector 48 > ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 6 vector 49 > ioapic0: routing intpin 12 (ISA IRQ 12) to lapic 6 vector 50 > ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 6 vector 51 > ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 6 vector 52 > ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 6 vector 53 > ioapic1: routing intpin 2 (PCI IRQ 26) to lapic 6 vector 54 > uhub4: 8 ports with 8 removable, self powered > ugen2.2: at usbus2 > ukbd0: > on usbus2 > kbd2 at ukbd0 > kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 > ums0: > on usbus2 > ums0: 5 buttons and [XYZ] coordinates ID=3D1 > GEOM: new disk da0 > Trying to mount root from ufs:/dev/da0s1a > ct_to_ts([2010-05-04 17:49:30]) =3D 1272995370.000000000 > start_init: trying /sbin/init > bge0: > bge0: link state changed to UP > link UP >=20 > _______________________________________________ > freebsd-scsi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > To unsubscribe, send any mail to = "freebsd-scsi-unsubscribe@freebsd.org"