Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 24 Apr 2015 14:36:06 -0700
From:      Motty Cruz <motty.cruz@gmail.com>
To:        Ricky G <ricky1252@hotmail.com>
Cc:        "freebsd-questions@freebsd.org" <freebsd-questions@freebsd.org>
Subject:   Re: ZFS-FreeBSD 10.1 -zpool degraded/5638733535486357169   REMOVED 0 0     0  was /dev/label/z3
Message-ID:  <553AB746.7060104@gmail.com>
In-Reply-To: <SNT146-W860537CB2E504A8AF04027A1EC0@phx.gbl>
References:  <553A9860.5000001@gmail.com> <SNT146-W5901CC4C933E3BFD987A1EA1EC0@phx.gbl>, <553A9FDD.80808@gmail.com> <SNT146-W860537CB2E504A8AF04027A1EC0@phx.gbl>

next in thread | previous in thread | raw e-mail | index | archive | help
Thanks Ricky,

yes you're right, I am using : Dual controller (J2600sD)
http://www.promise.com/us/Products/Vess/J2000

I have two FreeBSD 10.1 machines connected through SAS LSI card, to the 
JBOD.
Both Servers mount the drivers, however zpool is mounted only on Master 
machine.

I confirm that rebooting slave machine, zpool on the Master machine 
reports driver "REMOVED" error and zpool goes into degraded mode.

to get the zpool back on-line/clear the errors, I had to run "zpool 
clear tank". however, this can corrupt data once this machine go into 
production.

I have a similar setup but running FreeBSD 8.2, that problem does not 
exist in FreeBSD 8.2.

am posting this information in case someone out there can help me fix 
this error.

Thanks,


On 04/24/2015 02:13 PM, Ricky G wrote:
> Hey Motty,
> Reviewed your hardware and I'm still not quite positive on how the 
> setup works. From what I understand, this rack has two separate 
> servers running with two controllers that are connected providing 
> shared access to the storage. Please correct me if I am mistaken. 
> Someone else maybe more familiar may give you a better answer. I have 
> never used nor seen something like this. However, I will still suggest 
> what I suggested before, do hardware tests and make sure its not 
> faulty. Swap this z3 drive with another drive and see if its 
> that particular drive, or that particular port.
>
> Regards,
> Ricky
>
> ------------------------------------------------------------------------
> Date: Fri, 24 Apr 2015 12:56:13 -0700
> From: motty.cruz@gmail.com
> To: ricky1252@hotmail.com
> Subject: Re: ZFS-FreeBSD 10.1 -zpool degraded/5638733535486357169 
> REMOVED 0 0 0 was /dev/label/z3
>
> Hello Ricky,
> thank you very much for your reply;
>
> The JBOD Promise vess j26000SD has two SAS ports, 1 port is plug to 
> Machine A(master) 2nd port is plug to Machine B(slave). Both Machines 
> see the drivers, however zpool is only loaded on Machine A(master.
>
> Also, forgot to mention that if I ran "zpool clear tank" fixes that 
> issue. I am sure that rebooting the slave machine zpool on Master 
> machine reports drive was removed.
>
> any suggestions?
> Thanks again,
>
>
> On 04/24/2015 12:48 PM, Ricky G wrote:
>
>     Hey there,
>
>     This isn't really enough information to diagnose anything. What
>     relation does machine B have with A? is B a jail? is it a DAS or
>     SAN? are you positive rebooting the other machine that is causing
>     the drive to drop and the drive/backplane/port?
>
>     Based on the little info provided I suggest moving drive to
>     another port/backplane and running smart test on the drive
>     assuming its not an ssd.
>
>     Regards
>     Ricky
>
>     > Date: Fri, 24 Apr 2015 12:24:16 -0700
>     > From: motty.cruz@gmail.com <mailto:motty.cruz@gmail.com>
>     > To: freebsd-questions@freebsd.org
>     <mailto:freebsd-questions@freebsd.org>; motty.cruz@gmail.com
>     <mailto:motty.cruz@gmail.com>
>     > Subject: ZFS-FreeBSD 10.1 -zpool degraded/5638733535486357169
>     REMOVED 0 0 0 was /dev/label/z3
>     >
>     > Hello,
>     > I get the following error:
>     > 5638733535486357169REMOVED000was /dev/label/z3
>     >
>     > I have two FreeBSD 10.1 64bit machine A (master) and Machine
>     B(slave) if
>     > for whatever reason slave machine reboot, Machine A, reports zpool
>     > degraded and usually same disk (in this case z3) always appear
>     to be
>     > "REMOVED".
>     >
>     > any ideas? JBOD Promise Vess J2000D Series and LSI Card SAS9200.
>     >
>     > Thanks in advance!
>     > -Motty
>     > _______________________________________________
>     > freebsd-questions@freebsd.org
>     <mailto:freebsd-questions@freebsd.org> mailing list
>     > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
>     > To unsubscribe, send any mail to
>     "freebsd-questions-unsubscribe@freebsd.org"
>     <mailto:freebsd-questions-unsubscribe@freebsd.org>
>
>




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?553AB746.7060104>