Date: Tue, 28 Jan 1997 18:42:08 +0000 () From: "Lenzi, Sergio" <lenzi@bsi.com.br> To: gregs@mail.wacom.com Cc: freebsd-questions@FreeBSD.ORG Subject: Re: Quits responding to IP Message-ID: <Pine.BSF.3.91.970128183335.1916A-100000@sergio> In-Reply-To: <199701271733.JAA15251@freefall.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Hello gregs..... It seems that your system is running the install (generic) kernel. This kernel is very small to work with this load. Here is the kernel I use or "suggest".... ---------------------cut---------------------------- machine "i386" cpu "I386_CPU" cpu "I486_CPU" cpu "I586_CPU" cpu "I686_CPU" ident GENERIC maxusers 40 options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options FFS #Berkeley Fast Filesystem options MSDOSFS #MSDOS Filesystem options "CD9660" #ISO 9660 Filesystem options PROCFS #Process filesystem options "COMPAT_43" #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15 #Be pessimistic about Joe SCSI device options BOUNCE_BUFFERS #include support for DMA bounce buffers options UCONSOLE #Allow users to grab the console options FAILSAFE #Be conservative options SYSVSHM options SYSVSEM options SYSVMSG options "SHMMAXPGS=8000" config kernel root on wd0 controller isa0 controller pci0 controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr disk fd0 at fdc0 drive 0 disk fd1 at fdc0 drive 1 controller wdc0 at isa? port "IO_WD1" bio irq 14 flags 0x80ff80ff vector wdintr disk wd0 at wdc0 drive 0 disk wd1 at wdc0 drive 1 controller wdc1 at isa? disable port "IO_WD2" bio irq 15 flags 0x80ff80ff vector wdintr disk wd2 at wdc1 drive 0 disk wd3 at wdc1 drive 1 options ATAPI #Enable ATAPI support for IDE bus options ATAPI_STATIC #Don't do it as an LKM device wcd0 #IDE CD-ROM controller matcd0 at isa? port 0x230 bio device scd0 at isa? port 0x320 bio device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr options XSERVER # include code for XFree86 # Mandatory, don't remove device npx0 at isa? port "IO_NPX" irq 13 vector npxintr device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr device lpt0 at isa? port? tty irq 7 vector lptintr device ep0 at isa? port 0x300 net irq 10 vector epintr device ep1 at isa? port 0x300 net irq 10 vector epintr pseudo-device loop pseudo-device ether pseudo-device log pseudo-device sl 4 pseudo-device ppp 4 pseudo-device tun 4 pseudo-device pty 16 pseudo-device bpfilter 1 ---------------------------------cut---------------------------- Install the system sources for the kernel... (cd /cdrom/src/;cat ssys* | tar xvzf - -C /usr/src) install this config file as /usr/src/sys/i386/conf/server (for example> It is configured to work with up to 2 3com 3c509 at address 300 irq 10. do a config server,cd ../../compile/server, make depend all install. on second time you need to change something in the config, do a config -n server,cd ../../compile/server, make all install Be patient, on a machine like yours, the make lasts almost 30 minutes. after that, reboot the machine to work with the new kernel. Sergio Lenzi. Unix consult.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?Pine.BSF.3.91.970128183335.1916A-100000>