From owner-freebsd-questions Mon Mar 5 4:31:41 2001 Delivered-To: freebsd-questions@freebsd.org Received: from bells.cs.ucl.ac.uk (bells.cs.ucl.ac.uk [128.16.5.31]) by hub.freebsd.org (Postfix) with SMTP id 5CF5337B719 for ; Mon, 5 Mar 2001 04:31:38 -0800 (PST) (envelope-from G.Matthews@cs.ucl.ac.uk) Received: from cactus.cs.ucl.ac.uk by bells.cs.ucl.ac.uk with local SMTP id ; Mon, 5 Mar 2001 12:31:31 +0000 X-Mailer: exmh version 2.0.2 To: Tim Erlin Cc: questions@freebsd.org Subject: Re: fBSD 4.2-STABLE not detecting ed0 In-reply-to: Your message of "Fri, 02 Mar 2001 10:38:02 PST." <20010302183802.27960.qmail@web1102.mail.yahoo.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Date: Mon, 05 Mar 2001 12:31:31 +0000 Message-ID: <4311.983795491@cs.ucl.ac.uk> From: Greg MATTHEWS Sender: owner-freebsd-questions@FreeBSD.ORG Precedence: bulk X-Loop: FreeBSD.ORG tim.. i have no trouble with the DE220 and i have upgraded to 4.2-stable too. originally i found that the irq was clashing so altho the card appeared it was unusable. are you using a GENERIC kernel? are you configuring irq and mem in the boot config file? the irq should be the same as before as these cards are not plug and play. if you need to change the settings you'll have to get the dos utility from the dlink site (should be enough to just boot into dos from a boot disk andthen run the util). hope this helps GREG > I have two cards, xl0 (3com) has no prob. > > ed0 -- D-Link 220 does not show up at boot or > ifconfig. It is present in the kernel and rc.conf. > BIOS seems to detect the device. Had this card working > if fBSD 4.0-RELEASE. > > Any suggestions for troubleshooting are appreciated. > > --Tim To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message