Date: Fri, 23 Mar 2012 05:15:57 -0700 (PDT) From: lial <lial@yeah.net> To: freebsd-x11@freebsd.org Subject: Intel GPU patch 13.5 for stable/9 ([CFT] Xorg Upgrade 7.5.2) Message-ID: <1332504957141-5589273.post@n5.nabble.com>
next in thread | raw e-mail | index | archive | help
Hello all: I'v patch 13.5 for stable/9 for my Lenovo x201i Notebook ,I make build kernel and Xorg 7.5.2 WITH_KMS=yes WITH_NEW_XORG=yes , the driver of Video is xf86-video-intel-2.17.0 .When I start X ,I found: 1. I can't switch to other ttys; 2. When I quit FVWM2.64 ,the system halted; any advice? #dmesg Copyright (c) 1992-2012 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.0-STABLE #1: Tue Mar 13 16:20:32 UTC 2012 root@lial.lialdomain:/usr/obj/usr/src/stable/9/sys/GENERIC i386 CPU: Intel(R) Core(TM) i3 CPU M 350 @ 2.27GHz (2261.06-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x20655 Family = 6 Model = 25 Stepping = 5 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x9ae3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT> AMD Features=0x28100000<NX,RDTSCP,LM> AMD Features2=0x1<LAHF> TSC: P-state invariant, performance statistics real memory = 2147483648 (2048 MB) avail memory = 1942237184 (1852 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <LENOVO TP-6Q > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 cpu2 (AP): APIC ID: 4 cpu3 (AP): APIC ID: 5 ioapic0: Changing APIC ID to 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ctl: CAM Target Layer loaded acpi0: <LENOVO TP-6Q> on motherboard acpi_ec0: <Embedded Controller: GPE 0x11, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, 7bf00000 (3) failed cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci255: <ACPI PCI bus> on pcib0 pcib1: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf2000000-0xf23fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0 agp0: <Intel Ironlake (M) SVGA controller> on vgapci0 agp0: aperture size is 256M, detected 32764k stolen memory pci0: <simple comms> at device 22.0 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection 7.2.3> port 0x1820-0x183f mem 0xf2500000-0xf251ffff,0xf2525000-0xf2525fff irq 20 at device 25.0 on pci0 em0: Using an MSI interrupt em0: Ethernet address: f0:de:f1:04:06:a6 ehci0: <Intel PCH USB 2.0 controller USB-B> mem 0xf2728000-0xf27283ff irq 23 at device 26.0 on pci0 usbus0: EHCI version 1.0 usbus0: <Intel PCH USB 2.0 controller USB-B> on ehci0 hdac0: <Intel 5 Series/3400 Series High Definition Audio Controller> mem 0xf2520000-0xf2523fff irq 17 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0 pci13: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 23 at device 28.3 on pci0 pci5: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 20 at device 28.4 on pci0 pci2: <ACPI PCI bus> on pcib4 iwn0: <Intel(R) Centrino(R) Wireless-N 1000> mem 0xf2400000-0xf2401fff irq 16 at device 0.0 on pci2 ehci1: <Intel PCH USB 2.0 controller USB-A> mem 0xf2728400-0xf27287ff irq 19 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1: <Intel PCH USB 2.0 controller USB-A> on ehci1 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci14: <ACPI PCI bus> on pcib5 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel 5 Series/3400 Series AHCI SATA controller> port 0x1860-0x1867,0x1814-0x1817,0x1818-0x181f,0x1810-0x1813,0x1840-0x185f mem 0xf2727000-0xf27277ff irq 16 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 3Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 ahcich4: <AHCI channel> at channel 4 on ahci0 ahcich5: <AHCI channel> at channel 5 on ahci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) pci0: <dasp> at device 31.6 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff,0xd1000-0xd1fff,0xdd000-0xdffff,0xe0000-0xeffff pnpid ORM0000 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0 ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0 ppc0: parallel port not found. est0: <Enhanced SpeedStep Frequency Control> on cpu0 p4tcc0: <CPU Frequency Thermal Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 p4tcc1: <CPU Frequency Thermal Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 p4tcc2: <CPU Frequency Thermal Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 p4tcc3: <CPU Frequency Thermal Control> on cpu3 Timecounters tick every 1.000 msec hdac0: HDA Codec #0: Conexant CX20585 hdac0: HDA Codec #3: Intel Ibex Peak HDMI pcm0: <HDA Conexant CX20585 PCM #0 Analog> at cad 0 nid 1 on hdac0 pcm1: <HDA Conexant CX20585 PCM #1 Analog> at cad 0 nid 1 on hdac0 pcm2: <HDA Intel Ibex Peak HDMI PCM #0 DisplayPort> at cad 3 nid 1 on hdac0 usbus0: 480Mbps High Speed USB v2.0 usbus1: 480Mbps High Speed USB v2.0 ugen0.1: <Intel> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <Intel> at usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub0: 3 ports with 3 removable, self powered uhub1: 3 ports with 3 removable, self powered ugen0.2: <vendor 0x8087> at usbus0 uhub2: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus0 ugen1.2: <vendor 0x8087> at usbus1 uhub3: <vendor 0x8087 product 0x0020, class 9/0, rev 2.00/0.00, addr 2> on usbus1 uhub2: 6 ports with 6 removable, self powered uhub3: 8 ports with 8 removable, self powered ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <SAMSUNG HM250HI 2AC101C4> ATA-8 SATA 2.x device ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C) ada0: Previously was known as ad4 SMP: AP CPU #1 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #2 Launched! Trying to mount root from ufs:/dev/ada0s1a [rw]... drm0: <Intel IronLake> on vgapci0 info: [drm] MSI enabled 1 message(s) info: [drm] AGP at 0xd0000000 256MB iicbus0: <Philips I2C bus> on iicbb0 addr 0xc8 iic0: <I2C generic I/O> on iicbus0 iic1: <I2C generic I/O> on iicbus1 iicbus2: <Philips I2C bus> on iicbb1 addr 0x0 iic2: <I2C generic I/O> on iicbus2 iic3: <I2C generic I/O> on iicbus3 iicbus4: <Philips I2C bus> on iicbb2 addr 0x0 iic4: <I2C generic I/O> on iicbus4 iic5: <I2C generic I/O> on iicbus5 iicbus6: <Philips I2C bus> on iicbb3 addr 0x0 iic6: <I2C generic I/O> on iicbus6 iic7: <I2C generic I/O> on iicbus7 iicbus8: <Philips I2C bus> on iicbb4 addr 0x0 iic8: <I2C generic I/O> on iicbus8 iic9: <I2C generic I/O> on iicbus9 iicbus10: <Philips I2C bus> on iicbb5 addr 0x0 iic10: <I2C generic I/O> on iicbus10 iic11: <I2C generic I/O> on iicbus11 iicbus12: <Philips I2C bus> on iicbb6 addr 0x0 iic12: <I2C generic I/O> on iicbus12 iic13: <I2C generic I/O> on iicbus13 iicbus14: <Philips I2C bus> on iicbb7 addr 0x0 iic14: <I2C generic I/O> on iicbus14 iic15: <I2C generic I/O> on iicbus15 info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). info: [drm] Driver supports precise vblank timestamp query. [drm:KMS:pid2520:intel_detect_pch] Found Ibex Peak PCH [drm:KMS:pid2520:init_vbt_defaults] Set default to SSC at 100MHz [drm:KMS:pid2520:intel_parse_bios] Using VBT from OpRegion: $VBT IRONLAKE-MOBILEd [drm:KMS:pid2520:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120 display_clock_mode 0 [drm:KMS:pid2520:parse_general_definitions] crt_ddc_bus_pin: 2 [drm:KMS:pid2520:parse_lfp_panel_data] Found panel mode in BIOS VBT tables: [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 0:"1280x800" 0 69300 1280 1304 1336 1408 800 804 808 820 0x8 0xa [drm:KMS:pid2520:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables: [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa [drm:KMS:pid2520:parse_sdvo_device_mapping] No SDVO device info is found in VBT [drm:KMS:pid2520:intel_modeset_init] 2 display pipes available. [drm:KMS:pid2520:intel_modeset_init] plane 0 init failed: -19 [drm:KMS:pid2520:intel_modeset_init] plane 1 init failed: -19 [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 0 [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 0 [drm:KMS:pid2520:intel_crt_init] pch crt adpa set to 0xf40018 [drm:KMS:pid2520:intel_setup_outputs] HDMIB 0 PCH_DP_B 0 HDMIC 1 HDMID 0 PCH_DP_C 1 PCH_DP_D 0 LVDS 1 [drm:KMS:pid2520:intel_dp_i2c_init] i2c_init DPDDC-C [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e [drm:KMS:pid2520:intel_dp_i2c_aux_ch] aux_ch failed -60 [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e [drm:KMS:pid2520:intel_dp_i2c_aux_ch] aux_ch failed -60 [drm:KMS:pid2520:ironlake_crtc_dpms] crtc 0/0 dpms off [drm:KMS:pid2520:intel_update_fbc] [drm:KMS:pid2520:ironlake_crtc_dpms] crtc 1/1 dpms off [drm:KMS:pid2520:intel_update_fbc] [drm:KMS:pid2520:ironlake_init_pch_refclk] has_panel 1 has_lvds 1 has_pch_edp 0 has_cpu_edp 0 has_ck505 0 drm0: taking over the fictitious range 0xd0000000-0xe0000000 [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes : [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 21:"1280x800" 50 57790 1280 1304 1336 1408 800 804 808 820 0x40 0x5 [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 20:"1280x800" 60 69300 1280 1304 1336 1408 800 804 808 820 0x48 0x5 [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] [drm:KMS:pid2520:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40018 [drm:KMS:pid2520:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40018, result 0 [drm:KMS:pid2520:intel_crt_detect] CRT not detected via hotplug [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] disconnected [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:15:HDMI-A-1] [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 5 [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 5 [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 5 [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 5 [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 5 [drm:KMS:pid2520:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] got no edid, ddc port 4 [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:15:HDMI-A-1] disconnected [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:18:DP-1] [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:18:DP-1] disconnected [drm:KMS:pid2520:drm_setup_crtcs] [drm:KMS:pid2520:drm_enable_connectors] connector 5 enabled? yes [drm:KMS:pid2520:drm_enable_connectors] connector 12 enabled? no [drm:KMS:pid2520:drm_enable_connectors] connector 15 enabled? no [drm:KMS:pid2520:drm_enable_connectors] connector 18 enabled? no [drm:KMS:pid2520:drm_target_preferred] looking for cmdline mode on connector 5 [drm:KMS:pid2520:drm_target_preferred] looking for preferred mode on connector 5 [drm:KMS:pid2520:drm_target_preferred] found mode 1280x800 [drm:KMS:pid2520:drm_setup_crtcs] picking CRTCs for 8192x8192 config [drm:KMS:pid2520:drm_setup_crtcs] desired mode 1280x800 set on crtc 3 [drm:KMS:pid2520:intelfb_create] allocated 1280x800 fb: 0x00043000, bo 0xc8135b00 info: [drm] Initialized i915 1.6.0 20080730 [drm:KMS:pid2520:i915_getparam] Unknown parameter 17 [drm:KMS:pid2520:drm_mode_getresources] CRTC[2] CONNECTORS[4] ENCODERS[4] [drm:KMS:pid2520:drm_mode_getresources] [CRTC:3] [drm:KMS:pid2520:drm_mode_getresources] [CRTC:4] [drm:KMS:pid2520:drm_mode_getresources] [ENCODER:6:LVDS-6] [drm:KMS:pid2520:drm_mode_getresources] [ENCODER:13:DAC-13] [drm:KMS:pid2520:drm_mode_getresources] [ENCODER:14:TMDS-14] [drm:KMS:pid2520:drm_mode_getresources] [ENCODER:19:TMDS-19] [drm:KMS:pid2520:drm_mode_getresources] [CONNECTOR:5:LVDS-1] [drm:KMS:pid2520:drm_mode_getresources] [CONNECTOR:12:VGA-1] [drm:KMS:pid2520:drm_mode_getresources] [CONNECTOR:15:HDMI-A-1] [drm:KMS:pid2520:drm_mode_getresources] [CONNECTOR:18:DP-1] [drm:KMS:pid2520:drm_mode_getresources] CRTC[2] CONNECTORS[4] ENCODERS[4] [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:5:?] [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes : [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 20:"1280x800" 60 69300 1280 1304 1336 1408 800 804 808 820 0x48 0x5 [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 21:"1280x800" 50 57790 1280 1304 1336 1408 800 804 808 820 0x40 0x5 [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:5:?] [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:12:?] [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] [drm:KMS:pid2520:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40018, result 0 [drm:KMS:pid2520:intel_crt_detect] CRT not detected via hotplug [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] disconnected [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:12:?] [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] [drm:KMS:pid2520:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40018, result 0 [drm:KMS:pid2520:intel_crt_detect] CRT not detected via hotplug [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] disconnected [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:15:?] [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:15:HDMI-A-1] [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 5 [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 5 [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 5 [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 5 [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 5 [drm:KMS:pid2520:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] got no edid, ddc port 4 [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:15:HDMI-A-1] disconnected [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:15:?] [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:15:HDMI-A-1] [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 5 [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 5 [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 5 [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 5 [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 5 [drm:KMS:pid2520:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] got no edid, ddc port 4 [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:15:HDMI-A-1] disconnected [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:18:?] [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:18:DP-1] [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:18:DP-1] disconnected [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:18:?] [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:18:DP-1] [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:18:DP-1] disconnected [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:5:?] [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:5:LVDS-1] probed modes : [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 20:"1280x800" 60 69300 1280 1304 1336 1408 800 804 808 820 0x48 0x5 [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 21:"1280x800" 50 57790 1280 1304 1336 1408 800 804 808 820 0x40 0x5 [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:5:?] [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:12:?] [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] [drm:KMS:pid2520:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40018, result 0 [drm:KMS:pid2520:intel_crt_detect] CRT not detected via hotplug [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] disconnected [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:12:?] [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] [drm:KMS:pid2520:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40018, result 0 [drm:KMS:pid2520:intel_crt_detect] CRT not detected via hotplug [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:12:VGA-1] disconnected [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:15:?] [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:15:HDMI-A-1] [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 5 [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 5 [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 5 [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 5 [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 5 [drm:KMS:pid2520:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] got no edid, ddc port 4 [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:15:HDMI-A-1] disconnected [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:15:?] [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:15:HDMI-A-1] [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 5 [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 5 [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 5 [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 5 [drm:KMS:pid2520:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 5 [drm:KMS:pid2520:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] got no edid, ddc port 4 [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:15:HDMI-A-1] disconnected [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:18:?] [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:18:DP-1] [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:18:DP-1] disconnected [drm:KMS:pid2520:drm_mode_getconnector] [CONNECTOR:18:?] [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:18:DP-1] [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e [drm:KMS:pid2520:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e [drm:KMS:pid2520:drm_helper_probe_single_connector_modes] [CONNECTOR:18:DP-1] disconnected [drm:KMS:pid2520:drm_mode_addfb] [FB:22] [drm:KMS:pid2520:drm_mode_setcrtc] [CRTC:3] [drm:KMS:pid2520:drm_mode_setcrtc] [CONNECTOR:5:LVDS-1] [drm:KMS:pid2520:drm_crtc_helper_set_config] [drm:KMS:pid2520:drm_crtc_helper_set_config] [CRTC:3] [FB:22] #connectors=1 (x y) (0 0) [drm:KMS:pid2520:drm_crtc_helper_set_config] crtc has no fb, full mode set [drm:KMS:pid2520:drm_crtc_helper_set_config] modes are different, full mode set [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0 [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 23:"1280x800" 0 69300 1280 1304 1336 1408 800 804 808 820 0x0 0x5 [drm:KMS:pid2520:drm_crtc_helper_set_config] encoder changed, full mode switch [drm:KMS:pid2520:drm_crtc_helper_set_config] crtc changed, full mode switch [drm:KMS:pid2520:drm_crtc_helper_set_config] [CONNECTOR:5:LVDS-1] to [CRTC:3] [drm:KMS:pid2520:drm_crtc_helper_set_config] attempting to set mode from userspace [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 23:"1280x800" 0 69300 1280 1304 1336 1408 800 804 808 820 0x0 0x5 [drm:KMS:pid2520:drm_crtc_helper_set_mode] [CRTC:3] [drm:KMS:pid2520:ironlake_get_refclk] using SSC reference clock of 120 MHz [drm:KMS:pid2520:intel_choose_pipe_bpp_dither] clamping display bpc (was -1) to LVDS (6) [drm:KMS:pid2520:intel_choose_pipe_bpp_dither] setting pipe bpc to 8 (max display bpc 6) [drm:KMS:pid2520:ironlake_crtc_mode_set] Mode for pipe 0: [drm:KMS:pid2520:drm_mode_debug_printmodeline] Modeline 23:"1280x800" 0 69300 1280 1304 1336 1408 800 804 808 820 0x0 0x5 [drm:KMS:pid2520:intel_wait_for_vblank] vblank wait timed out [drm:KMS:pid2520:ironlake_update_plane] Writing base 0042B000 00000000 0 0 5120 [drm:KMS:pid2520:intel_update_fbc] [drm:KMS:pid2520:ironlake_update_wm] FIFO watermarks For pipe A - plane 6, cursor: 6 [drm:KMS:pid2520:ironlake_check_srwm] watermark 1: display plane 24, fbc lines 3, cursor 6 [drm:KMS:pid2520:ironlake_check_srwm] watermark 2: display plane 76, fbc lines 3, cursor 6 [drm:KMS:pid2520:drm_crtc_helper_set_mode] [ENCODER:6:LVDS-6] set [MODE:23:1280x800] [drm:KMS:pid2520:ironlake_update_wm] FIFO watermarks For pipe A - plane 6, cursor: 6 [drm:KMS:pid2520:ironlake_check_srwm] watermark 1: display plane 24, fbc lines 3, cursor 6 [drm:KMS:pid2520:ironlake_check_srwm] watermark 2: display plane 76, fbc lines 3, cursor 6 [drm:KMS:pid2520:intel_wait_for_vblank] vblank wait timed out [drm:KMS:pid2520:intel_wait_for_vblank] vblank wait timed out [drm:KMS:pid2520:ironlake_fdi_link_train] FDI_RX_IIR 0x700 [drm:KMS:pid2520:ironlake_fdi_link_train] FDI train 1 done. [drm:KMS:pid2520:ironlake_fdi_link_train] FDI_RX_IIR 0x600 [drm:KMS:pid2520:ironlake_fdi_link_train] FDI train 2 done. [drm:KMS:pid2520:ironlake_fdi_link_train] FDI train done [drm:KMS:pid2520:intel_update_fbc] [drm:KMS:pid2520:drm_crtc_helper_set_config] Setting connector DPMS state to on [drm:KMS:pid2520:drm_crtc_helper_set_config] [CONNECTOR:5:LVDS-1] set DPMS on [drm:KMS:pid2520:intel_crtc_cursor_set] [drm:KMS:pid0:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40018, result 0 [drm:KMS:pid0:intel_crt_detect] CRT not detected via hotplug [drm:KMS:pid0:output_poll_execute] [CONNECTOR:12:VGA-1] status updated from 2 to 2 [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error 5 [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4 error 5 [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 3 error 5 [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 2 error 5 [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 1 error 5 [drm:KMS:pid0:intel_hdmi_detect] [CONNECTOR:15:HDMI-A-1] got no edid, ddc port 4 [drm:KMS:pid0:output_poll_execute] [CONNECTOR:15:HDMI-A-1] status updated from 2 to 2 [drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e [drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e [drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003e [drm:KMS:pid0:output_poll_execute] [CONNECTOR:18:DP-1] status updated from 2 to 2 [drm:KMS:pid2520:intel_crtc_cursor_set] [drm:KMS:pid2520:intel_crtc_cursor_set] cursor off [drm:KMS:pid2520:ironlake_crtc_dpms] crtc 0/0 dpms off [drm:KMS:pid2520:intel_wait_for_vblank] vblank wait timed out [drm:KMS:pid2520:ironlake_update_wm] FIFO watermarks For pipe A - plane 6, cursor: 6 [drm:KMS:pid2520:ironlake_check_srwm] watermark 1: display plane 24, fbc lines 3, cursor 6 [drm:KMS:pid2520:ironlake_check_srwm] watermark 2: display plane 76, fbc lines 3, cursor 6 [drm:KMS:pid2520:intel_update_fbc] [drm:KMS:pid2520:ironlake_crtc_dpms] crtc 0/0 dpms on [drm:KMS:pid2520:ironlake_update_wm] FIFO watermarks For pipe A - plane 6, cursor: 6 [drm:KMS:pid2520:ironlake_check_srwm] watermark 1: display plane 24, fbc lines 3, cursor 6 [drm:KMS:pid2520:ironlake_check_srwm] watermark 2: display plane 76, fbc lines 3, cursor 6 [drm:KMS:pid2520:intel_wait_for_vblank] vblank wait timed out [drm:KMS:pid2520:intel_wait_for_vblank] vblank wait timed out [drm:KMS:pid2520:ironlake_fdi_link_train] FDI_RX_IIR 0x100 [drm:KMS:pid2520:ironlake_fdi_link_train] FDI train 1 done. [drm:KMS:pid2520:ironlake_fdi_link_train] FDI_RX_IIR 0x600 [drm:KMS:pid2520:ironlake_fdi_link_train] FDI train 2 done. [drm:KMS:pid2520:ironlake_fdi_link_train] FDI train done [drm:KMS:pid2520:intel_update_fbc] [drm:KMS:pid2520:intel_crtc_cursor_set] wlan0: link state changed to DOWN wlan0: link state changed to UP [drm:KMS:pid2520:intel_crtc_cursor_set] [drm:KMS:pid2520:intel_crtc_cursor_set] cursor off [drm:KMS:pid2520:intel_crtc_cursor_set] [drm:KMS:pid2520:intel_crtc_cursor_set] [drm:KMS:pid2520:intel_crtc_cursor_set] cursor off [drm:KMS:pid2520:intel_crtc_cursor_set] [drm:KMS:pid2520:intel_crtc_cursor_set] [drm:KMS:pid2520:intel_crtc_cursor_set] cursor off #cat /var/log/Xorg.0.log X.Org X Server 1.10.6 Release Date: 2012-02-10 [ 7565.306] X Protocol Version 11, Revision 0 [ 7565.306] Build Operating System: FreeBSD 9.0-STABLE i386 [ 7565.306] Current Operating System: FreeBSD lial.lialdomain 9.0-STABLE FreeBSD 9.0-STABLE #1: Tue Mar 13 16:20:32 UTC 2012 root@lial.lialdomain:/usr/obj/usr/src/stable/9/sys/GENERIC i386 [ 7565.306] Build Date: 13 March 2012 09:36:38PM [ 7565.306] [ 7565.306] Current version of pixman: 0.24.2 [ 7565.306] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 7565.306] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 7565.306] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 23 17:59:08 2012 [ 7565.390] (==) Using config file: "/etc/X11/xorg.conf" [ 7565.412] (==) ServerLayout "X.org Configured" [ 7565.412] (**) |-->Screen "Screen0" (0) [ 7565.412] (**) | |-->Monitor "Monitor0" [ 7565.412] (**) | |-->Device "Card0" [ 7565.412] (**) |-->Input Device "Mouse0" [ 7565.412] (**) |-->Input Device "Keyboard0" [ 7565.412] (**) Option "AutoAddDevices" "FALSE" [ 7565.412] (**) Not automatically adding devices [ 7565.412] (==) Automatically enabling devices [ 7565.521] (WW) The directory "/usr/local/lib/X11/fonts/msdos/" does not exist. [ 7565.521] Entry deleted from font path. [ 7565.580] (**) FontPath set to: /usr/local/lib/X11/fonts/misc/, /usr/local/lib/X11/fonts/OTF, /usr/local/lib/X11/fonts/wqy/, /usr/local/lib/X11/fonts/TTF/, /usr/local/lib/X11/fonts/Type1/, /usr/local/lib/X11/fonts/100dpi/, /usr/local/lib/X11/fonts/75dpi/, ${prefix}/share/fonts/X11/misc/, ${prefix}/share/fonts/X11/TTF/, ${prefix}/share/fonts/X11/OTF/, ${prefix}/share/fonts/X11/Type1/, ${prefix}/share/fonts/X11/100dpi/, ${prefix}/share/fonts/X11/75dpi/ [ 7565.580] (**) ModulePath set to "/usr/local/lib/xorg/modules" [ 7565.580] (II) Loader magic: 0x81ef100 [ 7565.580] (II) Module ABI versions: [ 7565.580] X.Org ANSI C Emulation: 0.4 [ 7565.580] X.Org Video Driver: 10.0 [ 7565.580] X.Org XInput driver : 12.2 [ 7565.580] X.Org Server Extension : 5.0 [ 7565.580] (--) PCI:*(0:0:2:0) 8086:0046:17aa:215a rev 2, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8, BIOS @ 0x????????/65536 [ 7565.580] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file. [ 7565.580] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file. [ 7565.580] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 7565.580] (II) "record" will be loaded. This was enabled by default and also specified in the config file. [ 7565.580] (II) "dri" will be loaded. This was enabled by default and also specified in the config file. [ 7565.580] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file. [ 7565.580] (II) LoadModule: "extmod" [ 7565.613] (II) Loading /usr/local/lib/xorg/modules/extensions/libextmod.so [ 7565.615] (II) Module extmod: vendor="X.Org Foundation" [ 7565.615] compiled for 1.10.6, module version = 1.0.0 [ 7565.615] Module class: X.Org Server Extension [ 7565.615] ABI class: X.Org Server Extension, version 5.0 [ 7565.615] (II) Loading extension MIT-SCREEN-SAVER [ 7565.615] (II) Loading extension XFree86-VidModeExtension [ 7565.615] (II) Loading extension XFree86-DGA [ 7565.615] (II) Loading extension DPMS [ 7565.615] (II) Loading extension XVideo [ 7565.615] (II) Loading extension XVideo-MotionCompensation [ 7565.615] (II) Loading extension X-Resource [ 7565.615] (II) LoadModule: "record" [ 7565.615] (II) Loading /usr/local/lib/xorg/modules/extensions/librecord.so [ 7565.617] (II) Module record: vendor="X.Org Foundation" [ 7565.617] compiled for 1.10.6, module version = 1.13.0 [ 7565.617] Module class: X.Org Server Extension [ 7565.617] ABI class: X.Org Server Extension, version 5.0 [ 7565.617] (II) Loading extension RECORD [ 7565.617] (II) LoadModule: "dbe" [ 7565.618] (II) Loading /usr/local/lib/xorg/modules/extensions/libdbe.so [ 7565.618] (II) Module dbe: vendor="X.Org Foundation" [ 7565.618] compiled for 1.10.6, module version = 1.0.0 [ 7565.618] Module class: X.Org Server Extension [ 7565.618] ABI class: X.Org Server Extension, version 5.0 [ 7565.618] (II) Loading extension DOUBLE-BUFFER [ 7565.618] (II) LoadModule: "glx" [ 7565.618] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so [ 7565.624] (II) Module glx: vendor="X.Org Foundation" [ 7565.624] compiled for 1.10.6, module version = 1.0.0 [ 7565.624] ABI class: X.Org Server Extension, version 5.0 [ 7565.624] (==) AIGLX disabled [ 7565.624] (II) Loading extension GLX [ 7565.625] (II) LoadModule: "dri" [ 7565.625] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri.so [ 7565.643] (II) Module dri: vendor="X.Org Foundation" [ 7565.643] compiled for 1.10.6, module version = 1.0.0 [ 7565.643] ABI class: X.Org Server Extension, version 5.0 [ 7565.643] (II) Loading extension XFree86-DRI [ 7565.643] (II) LoadModule: "dri2" [ 7565.644] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so [ 7565.644] (II) Module dri2: vendor="X.Org Foundation" [ 7565.644] compiled for 1.10.6, module version = 1.2.0 [ 7565.644] ABI class: X.Org Server Extension, version 5.0 [ 7565.644] (II) Loading extension DRI2 [ 7565.644] (II) LoadModule: "intel" [ 7565.660] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so [ 7565.699] (II) Module intel: vendor="X.Org Foundation" [ 7565.699] compiled for 1.10.6, module version = 2.17.0 [ 7565.699] Module class: X.Org Video Driver [ 7565.699] ABI class: X.Org Video Driver, version 10.0 [ 7565.699] (II) LoadModule: "mouse" [ 7565.699] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so [ 7565.700] (II) Module mouse: vendor="X.Org Foundation" [ 7565.700] compiled for 1.10.6, module version = 1.7.1 [ 7565.700] Module class: X.Org XInput Driver [ 7565.700] ABI class: X.Org XInput driver, version 12.2 [ 7565.700] (II) LoadModule: "kbd" [ 7565.700] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so [ 7565.701] (II) Module kbd: vendor="X.Org Foundation" [ 7565.701] compiled for 1.10.6, module version = 1.6.1 [ 7565.701] Module class: X.Org XInput Driver [ 7565.701] ABI class: X.Org XInput driver, version 12.2 [ 7565.701] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge Desktop (GT1), Sandybridge Desktop (GT2), Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1), Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+), Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2), Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server [ 7565.701] (--) Using syscons driver with X support (version 2.0) [ 7565.701] (--) using VT number 9 [ 7565.726] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so [ 7565.726] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support [ 7565.727] drmOpenDevice: node name is /dev/dri/card0 [ 7565.727] Failed to change owner or group for file /dev/dri! 2: No such file or directory [ 7565.727] Failed to change owner or group for file /dev/dri/card0! 2: No such file or directory [ 7565.727] drmOpenDevice: open result is -1, (No such file or directory) [ 7565.727] Failed to change owner or group for file /dev/dri/card0! 2: No such file or directory [ 7565.727] drmOpenDevice: open result is -1, (No such file or directory) [ 7565.727] drmOpenDevice: Open failed [ 7566.864] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 7566.864] drmOpenDevice: node name is /dev/dri/card0 [ 7566.864] drmOpenDevice: open result is 10, (OK) [ 7566.864] drmOpenByBusid: drmOpenMinor returns 10 [ 7566.864] drmOpenByBusid: Interface 1.4 failed, trying 1.1 [ 7566.864] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 7566.864] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 7566.864] (==) intel(0): RGB weight 888 [ 7566.864] (==) intel(0): Default visual is TrueColor [ 7566.864] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale [ 7566.864] (--) intel(0): Chipset: "Arrandale" [ 7566.865] (**) intel(0): Relaxed fencing enabled [ 7566.865] (**) intel(0): Wait on SwapBuffers? enabled [ 7566.865] (**) intel(0): Triple buffering? enabled [ 7566.865] (**) intel(0): Framebuffer tiled [ 7566.865] (**) intel(0): Pixmaps tiled [ 7566.865] (**) intel(0): 3D buffers tiled [ 7566.865] (**) intel(0): SwapBuffers wait enabled [ 7566.865] (==) intel(0): video overlay key set to 0x101fe [ 7566.865] (II) intel(0): Output LVDS1 using monitor section Monitor0 [ 7566.897] (II) intel(0): Output VGA1 has no monitor section [ 7566.907] (II) intel(0): Output HDMI1 has no monitor section [ 7566.913] (II) intel(0): Output DP1 has no monitor section [ 7566.913] (II) intel(0): EDID for output LVDS1 [ 7566.913] (II) intel(0): Manufacturer: LEN Model: 4011 Serial#: 0 [ 7566.913] (II) intel(0): Year: 2009 Week: 0 [ 7566.913] (II) intel(0): EDID Version: 1.3 [ 7566.913] (II) intel(0): Digital Display Input [ 7566.913] (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 16 [ 7566.914] (II) intel(0): Gamma: 2.20 [ 7566.914] (II) intel(0): DPMS capabilities: StandBy Suspend Off [ 7566.914] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 [ 7566.914] (II) intel(0): First detailed timing is preferred mode [ 7566.914] (II) intel(0): redX: 0.592 redY: 0.351 greenX: 0.334 greenY: 0.549 [ 7566.914] (II) intel(0): blueX: 0.154 blueY: 0.130 whiteX: 0.313 whiteY: 0.329 [ 7566.914] (II) intel(0): Manufacturer's mask: 0 [ 7566.914] (II) intel(0): Supported detailed timing: [ 7566.914] (II) intel(0): clock: 69.3 MHz Image Size: 261 x 163 mm [ 7566.914] (II) intel(0): h_active: 1280 h_sync: 1304 h_sync_end 1336 h_blank_end 1408 h_border: 0 [ 7566.914] (II) intel(0): v_active: 800 v_sync: 804 v_sync_end 808 v_blanking: 820 v_border: 0 [ 7566.914] (II) intel(0): Supported detailed timing: [ 7566.914] (II) intel(0): clock: 57.8 MHz Image Size: 261 x 163 mm [ 7566.914] (II) intel(0): h_active: 1280 h_sync: 1304 h_sync_end 1336 h_blank_end 1408 h_border: 0 [ 7566.914] (II) intel(0): v_active: 800 v_sync: 804 v_sync_end 808 v_blanking: 820 v_border: 0 [ 7566.914] (II) intel(0): Unknown vendor-specific block f [ 7566.914] (II) intel(0): LP121WX3-TLC1 [ 7566.914] (II) intel(0): EDID (in hex): [ 7566.914] (II) intel(0): 00ffffffffffff0030ae114000000000 [ 7566.914] (II) intel(0): 00130103801a1078eaba959759558c27 [ 7566.914] (II) intel(0): 21505400000001010101010101010101 [ 7566.914] (II) intel(0): 010101010101121b0080502014301820 [ 7566.914] (II) intel(0): 440005a31000001f9316008050201430 [ 7566.914] (II) intel(0): 1820440005a31000001f0000000f0081 [ 7566.914] (II) intel(0): 0a3c810a3216090030e4f001000000fe [ 7566.914] (II) intel(0): 004c503132315758332d544c433100ac [ 7566.914] (II) intel(0): EDID vendor "LEN", prod id 16401 [ 7566.914] (II) intel(0): Printing DDC gathered Modelines: [ 7566.914] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1304 1336 1408 800 804 808 820 +hsync +vsync (49.2 kHz) [ 7566.914] (II) intel(0): Modeline "1280x800"x0.0 57.79 1280 1304 1336 1408 800 804 808 820 +hsync +vsync (41.0 kHz) [ 7566.914] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 7566.914] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 7566.914] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 7566.914] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 7566.914] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 7566.914] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 7566.914] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 7566.914] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 7566.914] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 7566.914] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 7566.914] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 7566.914] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 7566.914] (II) intel(0): Printing probed modes for output LVDS1 [ 7566.914] (II) intel(0): Modeline "1280x800"x60.0 69.30 1280 1304 1336 1408 800 804 808 820 +hsync +vsync (49.2 kHz) [ 7566.914] (II) intel(0): Modeline "1280x800"x50.1 57.79 1280 1304 1336 1408 800 804 808 820 +hsync +vsync (41.0 kHz) [ 7566.914] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz) [ 7566.914] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz) [ 7566.914] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz) [ 7566.914] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz) [ 7566.914] (II) intel(0): EDID for output VGA1 [ 7566.924] (II) intel(0): EDID for output HDMI1 [ 7566.930] (II) intel(0): EDID for output DP1 [ 7566.930] (II) intel(0): Output LVDS1 connected [ 7566.930] (II) intel(0): Output VGA1 disconnected [ 7566.930] (II) intel(0): Output HDMI1 disconnected [ 7566.930] (II) intel(0): Output DP1 disconnected [ 7566.930] (II) intel(0): Using exact sizes for initial modes [ 7566.930] (II) intel(0): Output LVDS1 using initial mode 1280x800 [ 7566.930] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 7566.930] (II) intel(0): Kernel page flipping support detected, enabling [ 7566.930] (**) intel(0): Display dimensions: (260, 160) mm [ 7566.930] (**) intel(0): DPI set to (125, 127) [ 7566.930] (II) Loading sub module "fb" [ 7566.930] (II) LoadModule: "fb" [ 7566.931] (II) Loading /usr/local/lib/xorg/modules/libfb.so [ 7566.994] (II) Module fb: vendor="X.Org Foundation" [ 7566.994] compiled for 1.10.6, module version = 1.0.0 [ 7566.994] ABI class: X.Org ANSI C Emulation, version 0.4 [ 7566.994] (II) Loading sub module "dri2" [ 7566.994] (II) LoadModule: "dri2" [ 7566.995] (II) Loading /usr/local/lib/xorg/modules/extensions/libdri2.so [ 7566.995] (II) Module dri2: vendor="X.Org Foundation" [ 7566.995] compiled for 1.10.6, module version = 1.2.0 [ 7566.995] ABI class: X.Org Server Extension, version 5.0 [ 7566.995] (==) Depth 24 pixmap format is 32 bpp [ 7566.995] (II) intel(0): [DRI2] Setup complete [ 7566.995] (II) intel(0): [DRI2] DRI driver: i965 [ 7566.995] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled [ 7567.098] (II) UXA(0): Driver registered support for the following operations: [ 7567.098] (II) solid [ 7567.098] (II) copy [ 7567.098] (II) composite (RENDER acceleration) [ 7567.098] (II) put_image [ 7567.098] (II) get_image [ 7567.098] (==) intel(0): Backing store disabled [ 7567.098] (==) intel(0): Silken mouse enabled [ 7567.156] (II) intel(0): Initializing HW Cursor [ 7567.324] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 7567.347] (==) intel(0): DPMS enabled [ 7567.347] (==) intel(0): Intel XvMC decoder enabled [ 7567.348] (II) intel(0): Set up textured video [ 7567.348] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 7567.348] (II) intel(0): direct rendering: DRI2 Enabled [ 7567.348] (--) RandR disabled [ 7567.348] (II) Initializing built-in extension Generic Event Extension [ 7567.348] (II) Initializing built-in extension SHAPE [ 7567.348] (II) Initializing built-in extension MIT-SHM [ 7567.348] (II) Initializing built-in extension XInputExtension [ 7567.348] (II) Initializing built-in extension XTEST [ 7567.348] (II) Initializing built-in extension BIG-REQUESTS [ 7567.348] (II) Initializing built-in extension SYNC [ 7567.348] (II) Initializing built-in extension XKEYBOARD [ 7567.348] (II) Initializing built-in extension XC-MISC [ 7567.348] (II) Initializing built-in extension XINERAMA [ 7567.348] (II) Initializing built-in extension XFIXES [ 7567.348] (II) Initializing built-in extension RENDER [ 7567.348] (II) Initializing built-in extension RANDR [ 7567.348] (II) Initializing built-in extension COMPOSITE [ 7567.348] (II) Initializing built-in extension DAMAGE [ 7567.626] (II) AIGLX: Loaded and initialized /usr/local/lib/dri/swrast_dri.so [ 7567.626] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 7567.627] (II) intel(0): Setting screen physical size to 338 x 211 [ 7567.796] [dix] Could not init font path element ${prefix}/share/fonts/X11/misc/, removing from list! [ 7567.796] [dix] Could not init font path element ${prefix}/share/fonts/X11/TTF/, removing from list! [ 7567.796] [dix] Could not init font path element ${prefix}/share/fonts/X11/OTF/, removing from list! [ 7567.796] [dix] Could not init font path element ${prefix}/share/fonts/X11/Type1/, removing from list! [ 7567.796] [dix] Could not init font path element ${prefix}/share/fonts/X11/100dpi/, removing from list! [ 7567.796] [dix] Could not init font path element ${prefix}/share/fonts/X11/75dpi/, removing from list! [ 7568.124] (II) Using input driver 'mouse' for 'Mouse0' [ 7568.124] (II) Loading /usr/local/lib/xorg/modules/input/mouse_drv.so [ 7568.124] (**) Option "CorePointer" [ 7568.124] (**) Mouse0: always reports core events [ 7568.124] (**) Option "Protocol" "auto" [ 7568.124] (**) Option "Device" "/dev/sysmouse" [ 7568.124] (**) Mouse0: Protocol: "auto" [ 7568.124] (**) Mouse0: always reports core events [ 7568.124] (==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50 [ 7568.124] (**) Option "ZAxisMapping" "4 5 6 7" [ 7568.124] (**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7 [ 7568.124] (**) Mouse0: Buttons: 11 [ 7568.124] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) [ 7568.124] (**) Mouse0: (accel) keeping acceleration scheme 1 [ 7568.124] (**) Mouse0: (accel) acceleration profile 0 [ 7568.124] (**) Mouse0: (accel) acceleration factor: 2.000 [ 7568.124] (**) Mouse0: (accel) acceleration threshold: 4 [ 7568.124] (II) Mouse0: SetupAuto: hw.iftype is 4, hw.model is 0 [ 7568.124] (II) Mouse0: SetupAuto: protocol is SysMouse [ 7568.124] (II) Using input driver 'kbd' for 'Keyboard0' [ 7568.124] (II) Loading /usr/local/lib/xorg/modules/input/kbd_drv.so [ 7568.124] (**) Option "CoreKeyboard" [ 7568.124] (**) Keyboard0: always reports core events [ 7568.124] (**) Keyboard0: always reports core events [ 7568.124] (**) Option "Protocol" "standard" [ 7568.124] (**) Option "XkbRules" "base" [ 7568.124] (**) Option "XkbModel" "pc105" [ 7568.124] (**) Option "XkbLayout" "us" [ 7568.124] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) [ 7568.218] (EE) config/hal: couldn't initialise context: unknown error (null) [ 12259.213] (II) 3rd Button detected: disabling emulate3Button #pciconf -lv hostb0@pci0:255:0:0: class=0x060000 card=0x219617aa chip=0x2c628086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = 'Core Processor QuickPath Architecture Generic Non-core Registers' class = bridge subclass = HOST-PCI hostb1@pci0:255:0:1: class=0x060000 card=0x219617aa chip=0x2d018086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = 'Core Processor QuickPath Architecture System Address Decoder' class = bridge subclass = HOST-PCI hostb2@pci0:255:2:0: class=0x060000 card=0x219617aa chip=0x2d108086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = 'Core Processor QPI Link 0' class = bridge subclass = HOST-PCI hostb3@pci0:255:2:1: class=0x060000 card=0x219617aa chip=0x2d118086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = 'Core Processor QPI Physical 0' class = bridge subclass = HOST-PCI hostb4@pci0:255:2:2: class=0x060000 card=0x219617aa chip=0x2d128086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = 'Core Processor Reserved' class = bridge subclass = HOST-PCI hostb5@pci0:255:2:3: class=0x060000 card=0x219617aa chip=0x2d138086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = 'Core Processor Reserved' class = bridge subclass = HOST-PCI hostb6@pci0:0:0:0: class=0x060000 card=0x219317aa chip=0x00448086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = 'Core Processor DRAM Controller' class = bridge subclass = HOST-PCI vgapci0@pci0:0:2:0: class=0x030000 card=0x215a17aa chip=0x00468086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = 'Core Processor Integrated Graphics Controller' class = display subclass = VGA none0@pci0:0:22:0: class=0x078000 card=0x215f17aa chip=0x3b648086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset HECI Controller' class = simple comms em0@pci0:0:25:0: class=0x020000 card=0x215317aa chip=0x10ea8086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = '82577LM Gigabit Network Connection' class = network subclass = ethernet ehci0@pci0:0:26:0: class=0x0c0320 card=0x216317aa chip=0x3b3c8086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset USB2 Enhanced Host Controller' class = serial bus subclass = USB hdac0@pci0:0:27:0: class=0x040300 card=0x215e17aa chip=0x3b568086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset High Definition Audio' class = multimedia subclass = HDA pcib2@pci0:0:28:0: class=0x060400 card=0x216417aa chip=0x3b428086 rev=0x06 hdr=0x01 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset PCI Express Root Port 1' class = bridge subclass = PCI-PCI pcib3@pci0:0:28:3: class=0x060400 card=0x216417aa chip=0x3b488086 rev=0x06 hdr=0x01 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset PCI Express Root Port 4' class = bridge subclass = PCI-PCI pcib4@pci0:0:28:4: class=0x060400 card=0x216417aa chip=0x3b4a8086 rev=0x06 hdr=0x01 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset PCI Express Root Port 5' class = bridge subclass = PCI-PCI ehci1@pci0:0:29:0: class=0x0c0320 card=0x216317aa chip=0x3b348086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset USB2 Enhanced Host Controller' class = serial bus subclass = USB pcib5@pci0:0:30:0: class=0x060401 card=0x216517aa chip=0x24488086 rev=0xa6 hdr=0x01 vendor = 'Intel Corporation' device = '82801 Mobile PCI Bridge' class = bridge subclass = PCI-PCI isab0@pci0:0:31:0: class=0x060100 card=0x216617aa chip=0x3b078086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = 'Mobile 5 Series Chipset LPC Interface Controller' class = bridge subclass = PCI-ISA ahci0@pci0:0:31:2: class=0x010601 card=0x216817aa chip=0x3b2f8086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset 6 port SATA AHCI Controller' class = mass storage subclass = SATA none1@pci0:0:31:3: class=0x0c0500 card=0x216717aa chip=0x3b308086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset SMBus Controller' class = serial bus subclass = SMBus none2@pci0:0:31:6: class=0x118000 card=0x219017aa chip=0x3b328086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = '5 Series/3400 Series Chipset Thermal Subsystem' class = dasp iwn0@pci0:2:0:0: class=0x028000 card=0x13158086 chip=0x00848086 rev=0x00 hdr=0x00 vendor = 'Intel Corporation' device = 'Centrino Wireless-N 1000' class = network -- View this message in context: http://freebsd.1045724.n5.nabble.com/Intel-GPU-patch-13-5-for-stable-9-CFT-Xorg-Upgrade-7-5-2-tp5589273p5589273.html Sent from the freebsd-x11 mailing list archive at Nabble.com.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1332504957141-5589273.post>