Date: Fri, 30 Nov 2001 00:11:32 +0000 (GMT) From: Joe Karthauser <joe@tao.org.uk> To: FreeBSD-gnats-submit@freebsd.org Subject: kern/32384: pcm0: ac97 codec failed to reset extended mode on ACPI resume. Message-ID: <20011130001132.76CF6371@tao.org.uk>
next in thread | raw e-mail | index | archive | help
>Number: 32384 >Category: kern >Synopsis: pcm0: ac97 codec failed to reset extended mode on ACPI resume. >Confidential: no >Severity: non-critical >Priority: medium >Responsible: freebsd-bugs >State: open >Quarter: >Keywords: >Date-Required: >Class: sw-bug >Submitter-Id: current-users >Arrival-Date: Thu Nov 29 16:20:01 PST 2001 >Closed-Date: >Last-Modified: >Originator: Joe Karthauser >Release: FreeBSD 5.0-CURRENT i386 >Organization: >Environment: System: FreeBSD genius.tao.org.uk 5.0-CURRENT FreeBSD 5.0-CURRENT #51: Tue Nov 20 10:31:25 GMT 2001 joe@genius.tao.org.uk:/usr/obj/usr/src/sys/GENIUS i386 Dell Inspiron 5000e Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #51: Tue Nov 20 10:31:25 GMT 2001 joe@genius.tao.org.uk:/usr/obj/usr/src/sys/GENIUS Preloaded elf kernel "/boot/kernel/kernel" at 0xc046c000. Preloaded elf module "/boot/kernel/agp.ko" at 0xc046c0a8. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc046c150. ACPI debug layer 0x0 debug level 0x0 Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 846326291 Hz CPU: Pentium III/Pentium III Xeon/Celeron (846.33-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 536805376 (524224K bytes) avail memory = 517357568 (505232K bytes) Pentium Pro MTRR support enabled VESA: v2.0, 16384k memory, flags:0x1, mode table:0xc0365d22 (1000022) VESA: ATI MOBILE M3 Using $PIR table, 7 entries at 0xc00fdf50 npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <DELL I 5000 > on motherboard Timecounter "ACPI" frequency 3579545 Hz acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_cmbat0: <Control method Battery> on acpi0 acpi_cmbat1: <Control method Battery> on acpi0 acpi_acad0: <AC adapter> on acpi0 acpi_pcib0: <Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <PCI bus> on acpi_pcib0 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) acpi_pcib0: device is routed to IRQ 11 pcic0: <TI PCI-1225 PCI-CardBus Bridge> irq 11 at device 4.0 on pci0 pcic0: PCI Memory allocated: 0x44000000 pcic0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq] pccard0: <PC Card bus (classic)> on pcic0 acpi_pcib0: device is routed to IRQ 11 pcic1: <TI PCI-1225 PCI-CardBus Bridge> irq 11 at device 4.1 on pci0 pcic1: PCI Memory allocated: 0x44001000 pcic1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq] pccard1: <PC Card bus (classic)> on pcic1 isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <serial bus, USB> at device 7.2 (no driver attached) pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached) pcm0: <ESS Technology Maestro-2E> port 0x1400-0x14ff irq 5 at device 8.0 on pci0 pci0: <simple comms> at device 16.0 (no driver attached) acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 acpi_button0: <Power Button> on acpi0 acpi_button1: <Sleep Button> on acpi0 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 ata-: ata0 already exists, skipping it ata-: ata1 already exists, skipping it atkbdc-: atkbdc0 already exists, skipping it sc-: sc0 already exists, skipping it vga-: vga0 already exists, skipping it orm0: <Option ROM> at iomem 0xc0000-0xcefff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/7 bytes threshold plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 pmtimer0 on isa0 acpi_cpu0: set speed to 100.0% acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5% acpi_button0: power button pressed uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 5 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered /dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 $ /dev/vmmon: Module vmmon: initialized aue0: LINKSYS Inc. LINKSYS USB Adapter, rev 1.10/1.01, addr 2 aue0: Ethernet address: 00:e0:98:84:c5:55 miibus0: <MII bus> on aue0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto acpi_ec0: EcRead: Failed waiting for EC to send data. acpi_ec0: EcWaitEventIntr called without EC lock! acpi_ec0: EcRead: Failed waiting for EC to send data. acpi_ec0: EcWaitEventIntr called without EC lock! acpi_ec0: EcRead: Failed waiting for EC to send data. acpi_lid0: Lid closed wakeup from sleeping state (slept 00:00:26) ata0: resetting devices .. done ata1: resetting devices .. done pcm0: ac97 codec failed to reset extended mode (0, got 80) acpi_lid0: Lid opened >Description: When the laptop resumes after a suspend caused by an ACPI lid close event the pcm driver gives this error: Nov 29 23:54:22 genius /boot/kernel/kernel: pcm0: ac97 codec failed to reset extended mode (0, got 80) Nov 29 23:54:22 genius /boot/kernel/kernel: pcm0: ac97 codec failed to reset extended mode (0, got 80) The audio appears to continue working; maybe the error should be an advisory of some type instead? >How-To-Repeat: >Fix: >Release-Note: >Audit-Trail: >Unformatted: To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20011130001132.76CF6371>