Date: Thu, 14 Jun 2001 13:20:03 -0700 (PDT) From: Thomas Quinot <thomas@cuivre.fr.eu.org> To: freebsd-bugs@FreeBSD.org Subject: Re: kern/24596: sysinstall crash: Page fault while in kernel mode Message-ID: <200106142020.f5EKK3t87282@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
The following reply was made to PR kern/24596; it has been noted by GNATS.
From: Thomas Quinot <thomas@cuivre.fr.eu.org>
To: freebsd-gnats-submit@FreeBSD.org
Cc: ernst@jollem.com
Subject: Re: kern/24596: sysinstall crash: Page fault while in kernel mode
Date: Thu, 14 Jun 2001 22:10:34 +0200
I reproduced the very same crash today with:
4.3-STABLE FreeBSD 4.3-STABLE #2: Tue May 1 20:28:53 CEST 2001
I have a make world on a freshly-cvsupped source tree in progess right
now, in the hope that it will relieve the problem.
dmesg output:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.3-STABLE #2: Tue May 1 20:28:53 CEST 2001
thomas@melusine.cuivre.fr.eu.org:/usr/obj/usr/src/sys/MELUSINE
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (300.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x660 Stepping = 0
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 134205440 (131060K bytes)
avail memory = 126836736 (123864K bytes)
Preloaded elf kernel "kernel" at 0xc03b6000.
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI Mach64-GB graphics accelerator> at 0.0 irq 11
isab0: <Intel 82371AB PCI to ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xb800-0xb80f at device 4.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 4.2 irq 9
chip1: <Intel 82371AB Power management controller> port 0xe800-0xe80f at device 4.3 on pci0
pci0: <unknown card> (vendor=0x109e, dev=0x0350) at 9.0 irq 9
xl0: <3Com 3c900-COMBO Etherlink XL> port 0xb000-0xb03f irq 9 at device 10.0 on pci0
xl0: Ethernet address: 00:60:97:7c:8c:2c
xl0: selecting 10baseT transceiver, half duplex
pcm0: <AudioPCI ES1371> port 0xa800-0xa83f irq 9 at device 11.0 on pci0
sym0: <875> port 0xa400-0xa4ff mem 0xdf800000-0xdf800fff,0xe0000000-0xe00000ff irq 11 at device 12.0 on pci0
sym0: Tekram NVRAM, ID 7, Fast-20, SE, parity checking
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 5 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2 at port 0x3e8-0x3ef irq 4 on isa0
sio2: type 16550A
sio3 at port 0x2e8-0x2ef irq 10 on isa0
sio3: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
IP Filter: v3.4.16 initialized. Default = pass all, Logging = enabled
ad0: 6149MB <QUANTUM FIREBALL EX6.4A> [13328/15/63] at ata0-master UDMA33
ad1: 14324MB <QUANTUM FIREBALLlct15 15> [29104/16/63] at ata0-slave UDMA33
acd0: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-105S 0122> at ata1-master using PIO4
Waiting 3 seconds for SCSI devices to settle
sa0 at sym0 bus 0 target 5 lun 0
sa0: <HP C1533A HP00> Removable Sequential Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 8)
Mounting root from ufs:/dev/ad1s1a
WARNING: / was not properly dismounted
da0 at sym0 bus 0 target 6 lun 0
da0: <IBM DDRS-39130W S71D> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 8715MB (17850000 512 byte sectors: 255H 63S/T 1111C)
(cd0:sym0:0:2:0): got CAM status 0x4c
(cd0:sym0:0:2:0): fatal error, failed to attach to device
(cd0:sym0:0:2:0): lost device
(cd0:sym0:0:2:0): removing device entry
IP Filter: already initialized
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xb400-0xb41f irq 9 at device 4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
--
Thomas.Quinot@Cuivre.FR.EU.ORG
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-bugs" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200106142020.f5EKK3t87282>