Date: Tue, 1 Dec 2009 01:18:25 +0200 From: Thodoris Stamatopoulos <thodoriss@gmail.com> To: freebsd-net@freebsd.org Subject: Re: MPD Multiple PPPoE to same ISP Message-ID: <0495E801-AE87-4DDF-97E4-5D997B221701@gmail.com> In-Reply-To: <4B1446AE.2010602@elischer.org> References: <927edfce0911190736r3f202001h2082052b7922c723@mail.gmail.com> <4B08214F.8070204@gmx.com> <3739D5B5-5AA3-47A5-B8FA-AC35EF6B273E@gmail.com> <4B1446AE.2010602@elischer.org>
next in thread | previous in thread | raw e-mail | index | archive | help
I didnt knew it!, thanks again guys :) very nice tip especially when you = have a bunch of connections On Dec 1, 2009, at 12:26 AM, Julian Elischer wrote: > Thodoris Stamatopoulos wrote: >> Thank you very much Nikos, at first it didnt worked with the 7.2 = Release kernel (cant compile kernel with radix option), but with 8 it = worked like a charm, all interface now have the same gateway >> and all ng interfaces have ip at last... >> Thanks >> Thodoris >> (euxaristw:)) >> On Nov 21, 2009, at 7:20 PM, Nikos Vassiliadis wrote: >>> Thodoris S. wrote: >>>> I am trying to make Multiple PPPoE Connections to the Same ISP for >>>> Load Balancing reasons >>>> my mpd.conf is: >>>> default: >>>> load adsl0 >>>> load adsl1 >>>> load adsl2 >>>> adsl0: >>>> new -i ng0 pppoe0 pppoe0 >>>> set iface route default >>>> set iface disable on-demand >>>> set iface idle 0 >>>> set bundle disable multilink >>>> set bundle authname "***" >>>> set bundle password "***" >>>> set bundle no noretry >>>> set link keep-alive 10 60 >>>> set link max-redial 0 >>>> set link no acfcomp protocomp >>>> set link disable pap chap >>>> set link accept chap >>>> set link mtu 1492 >>>> set ipcp yes vjcomp >>>> set ipcp ranges 0.0.0.0/0.0.0.0/0 >>>> set ipcp enable req-pri-dns >>>> set ipcp enable req-sec-dns >>>> open >>>> adsl1: >>>> new -i ng1 pppoe1 pppoe1 >>>> set iface route default >>>> set iface disable on-demand >>>> set iface idle 0 >>>> set bundle disable multilink >>>> set bundle authname "***" >>>> set bundle password "***" >>>> set bundle no noretry >>>> set link keep-alive 10 60 >>>> set link max-redial 0 >>>> set link no acfcomp protocomp >>>> set link disable pap chap >>>> set link accept chap >>>> set link mtu 1492 >>>> set ipcp yes vjcomp >>>> set ipcp ranges 0.0.0.0/0.0.0.0/0 >>>> set ipcp enable req-pri-dns >>>> set ipcp enable req-sec-dns >>>> open >>>> adsl2: >>>> new -i ng2 pppoe2 pppoe2 >>>> set iface route default >>>> set iface disable on-demand >>>> set iface idle 0 >>>> set bundle disable multilink >>>> set bundle authname "***" >>>> set bundle password "***" >>>> set bundle no noretry >>>> set link keep-alive 10 60 >>>> set link max-redial 0 >>>> set link no acfcomp protocomp >>>> set link disable pap chap >>>> set link accept chap >>>> set link mtu 1492 >>>> set ipcp yes vjcomp >>>> set ipcp ranges 0.0.0.0/0.0.0.0/0 >>>> set ipcp enable req-pri-dns >>>> set ipcp enable req-sec-dns >>>> open > As a side issue, to improve readability, might I suggest > something like: >=20 > adsl0: > new -i ng0 pppoe0 pppoe0 > set bundle authname "***" > set bundle password "***" > load adsldflt >=20 > adsl1: > new -i ng1 pppoe1 pppoe1 > set bundle authname "***" > set bundle password "***" > load adsldflt >=20 > adsl2: > new -i ng2 pppoe2 pppoe2 > set bundle authname "***" > set bundle password "***" > load adsldflt >=20 > adsldflt: > set iface route default > set iface disable on-demand > set iface idle 0 > set bundle disable multilink > set bundle no noretry > set link keep-alive 10 60 > set link max-redial 0 > set link no acfcomp protocomp > set link disable pap chap > set link accept chap > set link mtu 1492 > set ipcp yes vjcomp > set ipcp ranges 0.0.0.0/0.0.0.0/0 > set ipcp enable req-pri-dns > set ipcp enable req-sec-dns > open >=20 >=20 >=20 >=20
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?0495E801-AE87-4DDF-97E4-5D997B221701>