Date: Sun, 15 Oct 2006 06:53:52 -0400 From: "Jim Stapleton" <stapleton.41@gmail.com> To: freebsd-questions@freebsd.org Subject: Re: USB Mass Storage stopped working, help requested Message-ID: <80f4f2b20610150353u3f046658w92e35ebb5814ddf8@mail.gmail.com> In-Reply-To: <453209DD.8080005@locolomo.org> References: <80f4f2b20610141440m66306927vc99186c9176a2a4f@mail.gmail.com> <453209DD.8080005@locolomo.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On 10/15/06, Erik Norgaard <norgaard@locolomo.org> wrote: > Jim Stapleton wrote: > > > It used to work on this machine, the kernel/world has not been > > recompiled/reinstalled since then. However, A USB drive that used to > > work (and still works in windows) no longer works in FreeBSD. When I > > plug in the drive, the /dev/da* devices do not show up. The system is > > running 6.1. > > When you plug in the USB drive, lines should be appended to the dmesg of > the kernel identifying the device - or any errors. Please post that. > > > The handbook says I need these: > > device scbus > > device da > > device pass > > device uhci > > device ohci > > device usb > > device umass > > You may need ehci if this is USB 2.0, but I think it would otherwise > fall back on either ohci or uhci. > > > Scanning dmesg for usb, I get: > > sjss@aragorn 17:32:22 (0) /usr/src > dmesg | grep usb > > usb0: <UHCI (generic) USB controller> on uhci0 > > usb0: USB revision 1.0 > > usb1: <UHCI (generic) USB controller> on uhci1 > > usb1: USB revision 1.0 > > usb2: <UHCI (generic) USB controller> on uhci2 > > usb2: USB revision 1.0 > > usb3: <UHCI (generic) USB controller> on uhci3 > > usb3: USB revision 1.0 > > usb4: EHCI version 1.0 > > usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 > > usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 > > usb4: USB revision 2.0 > > See comment above on dmesg. You don't get all the relevant info by > grepping for usb. > > > The results from usbdevs: > > sjss@aragorn 17:34:11 (0) /usr/src > sudo usbdevs > > addr 1: UHCI root hub, Intel > > addr 1: UHCI root hub, Intel > > addr 1: UHCI root hub, Intel > > addr 2: USB-PS/2 Optical Mouse, Logitech > > addr 1: UHCI root hub, Intel > > addr 1: EHCI root hub, Intel > > addr 2: iAUDIO X5, Cowon Systems, Inc. > > Is that with the device plugged in? If so, seems logical that there is > no device in /dev because it is not found. > > Cheers, Erik > > -- > Ph: +34.666334818 web: http://www.locolomo.org > X.509 Certificate: http://www.locolomo.org/crt/8D03551FFCE04F0C.crt > Key ID: 69:79:B8:2C:E3:8F:E7:BE:5D:C3:C3:B1:74:62:B8:3F:9F:1F:69:B9 > OK, here's the full dmesg. It's the IAUDIO X5 devices (I just use it as a portable hard drive a lot, which is why I called it that). After unplugging/plugging it in several times, I noticed my dmesg doesn't change: Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-STABLE #1: Mon Jul 24 16:10:27 EDT 2006 root@:/usr/obj/usr/src/sys/JIMKERN Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Genuine Intel(R) CPU T1300 @ 1.66GHz (1662.52-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6e8 Stepping = 8 Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE> Features2=0xc1a9<SSE3,MON,VMX,EST,TM2,<b14>,<b15>> real memory = 526843904 (502 MB) avail memory = 506183680 (482 MB) ACPI APIC Table: <INTEL CALISTGA> ioapic0 <Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.17.2 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: <TOSINV Capell00> on motherboard acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR acpi0: Power Button (fixed) acpi_bus_number: can't get _ADR acpi_bus_number: can't get _ADR ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.PCIB.DOCK._STA] (Node 0xc3241360), AE_NOT_EXIST ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.PCIB.DOCK._STA] (Node 0xc3241360), AE_NOT_EXIST ACPI-0356: *** Error: Region EmbeddedControl(3) has no handler ACPI-1304: *** Error: Method execution failed [\\_SB_.PCI0.PCIB.DOCK._STA] (Node 0xc3241360), AE_NOT_EXIST ACPI-0239: *** Error: Method execution failed [\\_SB_.PCI0.PCIB.DOCK._STA] (Node 0xc3241360), AE_NOT_EXIST Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0 acpi_ec0: <Embedded Controller: GPE 0x16> port 0x62,0x66 on acpi0 cpu0: <ACPI CPU> on acpi0 acpi_perf0: <ACPI CPU Frequency Control> on cpu0 acpi_perf0: failed in PERF_STATUS attach device_attach: acpi_perf0 attach returned 6 acpi_perf0: <ACPI CPU Frequency Control> on cpu0 acpi_perf0: failed in PERF_STATUS attach device_attach: acpi_perf0 attach returned 6 acpi_throttle0: <ACPI CPU Throttling> on cpu0 acpi_lid0: <Control Method Lid Switch> on acpi0 battery0: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 acpi_video0: <ACPI video extension> port 0x1800-0x1807 mem 0xdc100000-0xdc17ffff,0xc0000000-0xcfffffff,0xdc200000-0xdc23ffff irq 16 at device 2.0 on pci0 pci0: <display> at device 2.1 (no driver attached) pci0: <multimedia> at device 27.0 (no driver attached) pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib1 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0 pci3: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0 pci5: <ACPI PCI bus> on pcib3 pci5: <network> at device 0.0 (no driver attached) uhci0: <UHCI (generic) USB controller> port 0x1820-0x183f irq 23 at device 29.0 on pci0 uhci0: [GIANT-LOCKED] usb0: <UHCI (generic) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <UHCI (generic) USB controller> port 0x1840-0x185f irq 19 at device 29.1 on pci0 uhci1: [GIANT-LOCKED] usb1: <UHCI (generic) USB controller> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <UHCI (generic) USB controller> port 0x1860-0x187f irq 18 at device 29.2 on pci0 uhci2: [GIANT-LOCKED] usb2: <UHCI (generic) USB controller> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <UHCI (generic) USB controller> port 0x1880-0x189f irq 16 at device 29.3 on pci0 uhci3: [GIANT-LOCKED] usb3: <UHCI (generic) USB controller> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xdc444000-0xdc4443ff irq 23 at device 29.7 on pci0 ehci0: [GIANT-LOCKED] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered umass0: Cowon Systems, Inc. iAUDIO X5, rev 2.00/1.00, addr 2 pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci7: <ACPI PCI bus> on pcib4 cbb0: <PCI-CardBus Bridge> at device 6.0 on pci7 cbb0: Found memory at dc007000 cbb0: Secondary bus is 0 cbb0: Setting primary bus to 7 cbb0: Secondary bus set to 8 subbus 9 cardbus0: <CardBus bus> on cbb0 pccard0: <16-bit PCCard bus> on cbb0 fwohci0: <1394 Open Host Controller Interface> mem 0xdc006000-0xdc0067ff,0xdc000000-0xdc003fff irq 17 at device 6.1 on pci7 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 4. fwohci0: EUI64 00:08:0d:a0:d1:44:35:57 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) pci7: <mass storage> at device 6.2 (no driver attached) pci7: <base peripheral> at device 6.3 (no driver attached) fxp0: <Intel Pro/100 VE Network Connection> port 0x4000-0x403f mem 0xdc005000-0xdc005fff irq 20 at device 8.0 on pci7 miibus0: <MII bus> on fxp0 inphy0: <i82562ET 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:a0:d1:44:35:57 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <GENERIC ATA controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x18b0-0x18bf at device 31.2 on pci0 ata0: <ATA channel 0> on atapci0 ata1: <ATA channel 1> on atapci0 pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 pmtimer0 on isa0 orm0: <ISA Option ROMs> at iomem 0xce800-0xcffff,0xdc000-0xdffff,0xe0000-0xe17ff on isa0 ppc0: parallel port not found. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/22.00, addr 2, iclass 3/1 ums0: 8 buttons and Z dir. Timecounter "TSC" frequency 1662515930 Hz quality 800 Timecounters tick every 1.000 msec Status is 0x30000006 ad0: 57231MB <FUJITSU MHV2060BH 00000028> at ata0-master UDMA33 acd0: DVDR <MATSHITADVD-RAM UJ-841S/1.50> at ata1-master UDMA33 umass0: at uhub4 port 5 (addr 2) disconnected Trying to mount root from ufs:/dev/ad0s1a umass0: detached umass0: Cowon Systems, Inc. iAUDIO X5, rev 2.00/1.00, addr 2 umass0: BBB reset failed, TIMEOUT umass0: BBB reset failed, TIMEOUT module_register: module uhub/umass already exists! Module uhub/umass failed to register: 17 umass0: BBB reset failed, TIMEOUT umass0: BBB reset failed, TIMEOUT umass0: BBB reset failed, TIMEOUT umass0: at uhub4 port 5 (addr 2) disconnected umass0: detached usb4: port reset timeout uhub4: port 5 reset failed TGhanks, -Jim Stapleton
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?80f4f2b20610150353u3f046658w92e35ebb5814ddf8>