Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 31 May 2009 16:18:43 +0200
From:      CeDeROM <tomek.cedro@gmail.com>
To:        FreeBSD-gnats-submit@FreeBSD.org
Cc:        Florent Thoumie <flz@FreeBSD.org>
Subject:   ports/135094: [new port] devel/openocd
Message-ID:  <3fcfb0ba0905310718x5b3b97ccs4713a8332aac0e06@mail.gmail.com>
Resent-Message-ID: <200905311450.n4VEo1bT045557@freefall.freebsd.org>

next in thread | raw e-mail | index | archive | help

>Number:         135094
>Category:       ports
>Synopsis:       [New port] devel/openocd - The Open On-Chip Debugger (OpenOCD)
>Confidential:   no
>Severity:       non-critical
>Priority:       high
>Responsible:    freebsd-ports-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          change-request
>Submitter-Id:   current-users
>Arrival-Date:   Sun May 31 14:50:00 UTC 2009
>Closed-Date:
>Last-Modified:
>Originator:     Tomek Cedro
>Release:        FreeBSD 7.2-RELEASE i386
>Organization:
Tomek Cedro
>Environment:
System: FreeBSD amd64.home.aster.pl 7.2-RELEASE FreeBSD 7.2-RELEASE
#0: Fri May 1 08:49:13 UTC 2009
root@walker.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386


>Description:
	[New port] devel/openocd - The Open On-Chip Debugger (OpenOCD) aims
to provide debugging, in-system programming and boundary-scan testing
for embedded target devices.
>How-To-Repeat:
	
>Fix:

# This is a shell archive.  Save it in a file, remove anything before
# this line, and then unpack it by entering "sh file".  Note, it may
# create directories; files and directories will be owned by you and
# have default permissions.
#
# This archive contains:
#
#	/usr/ports/devel/openocd
#	/usr/ports/devel/openocd/distinfo
#	/usr/ports/devel/openocd/Makefile
#	/usr/ports/devel/openocd/pkg-descr
#	/usr/ports/devel/openocd/pkg-plist
#	/usr/ports/devel/openocd/files
#	/usr/ports/devel/openocd/files/patch-openocd.c
#	/usr/ports/devel/openocd/pkg-message
#
echo c - /usr/ports/devel/openocd
mkdir -p /usr/ports/devel/openocd > /dev/null 2>&1
echo x - /usr/ports/devel/openocd/distinfo
sed 's/^X//' >/usr/ports/devel/openocd/distinfo <<
'3afeb637222531d093b8e5b2729bcff1'
XMD5 (openocd-0.1.0.tar.gz) = 994b603d280ab85b5f255342c1d6b66c
XSHA256 (openocd-0.1.0.tar.gz) =
e468c907355727f7aede5623afd77721eb75abe7686af7f2f388f41a7c0f2911
XSIZE (openocd-0.1.0.tar.gz) = 985328
3afeb637222531d093b8e5b2729bcff1
echo x - /usr/ports/devel/openocd/Makefile
sed 's/^X//' >/usr/ports/devel/openocd/Makefile <<
'88d611a1eb1fabe2051a56e779ff5244'
X# New ports collection makefile for:   openocd
X# Date created:       31 May 2009
X# Whom:               Tomek CeDeROM Cedro (http://www.tomek.cedro.info)
X#
X# $FreeBSD$
X#
X
XPORTNAME=		openocd
XPORTVERSION=	0.1.0
XCATEGORIES=	devel
XMASTER_SITES=	${MASTER_SITE_BERLIOS}
XMASTER_SITE_SUBDIR=	openocd
X
XMAINTAINER=	tomek.cedro@gmail.com
XCOMMENT=		Open On-Chip Debugger
X
XWRKSRC=		${WRKDIR}/${PORTNAME}-${PORTVERSION}/
XMAN1=		openocd.1
XINFO=		${PORTNAME}
XUSE_GMAKE=	yes
XCFLAGS+=		-I${PREFIX}/include -I${LOCALBASE}/include -L${PREFIX}/lib
-L${LOCALBASE}/lib
X
XGNU_CONFIGURE=	yes
XCONFIGURE_ARGS=	--enable-release
XOPTIONS=		DUMMY "Dummy driver support" on \
X			FT2232 "FT2232 based USB devices (using libftdi)" on \
X			RLINK "Raisonance RLink JTAG Programmer" on\
X			JLINK "Segger J-Link JTAG Programmer" on\
X			VSLLINK "Versaloon-Link JTAG Programmer" on\
X			USBPROG "usbprog JTAG Programmer" on\
X			PRESTO "ASIX Presto Programmer (using libftdi)" on\
X			AT91RM9200 "AT91RM9200 based SBCs" on\
X			EP93XX "EP93xx based SBCs" on
X#Below are the interfaces that need source rewitre to work with FreeBSD
X# They are hidden because they break a build. Patches are welcome :-)
X# Type: make WITH_{OPTION}=1 to try the broken build (ie: make WITH_PARPORT=1)
X#			PARPORT "Enable building the pc parallel port driver" off\
X# Parport: parport.c:68:20: error: sys/io.h: No such file or directory
X#			AMTJTAGACCEL "Amontec JTAG-Accelerator driver" off \
X# Amtjtagaccel: amt_jtagaccel.c:45:20: error: sys/io.h: No such file
or directory
X#			ECOSBOARD "eCosBoard based JTAG debugger" off\
X# Ecosboard:	replacements.h:36:28: error: pkgconf/system.h: No such
file or directory
X#			OOCDTRACE "OpenOCD+trace ETM capture device" off\
X# Oocdtrace:	ocd_trace.c:127: error: 'B2500000' undeclared (first use
in this function)
X#			GW16012 "Gateworks GW16012 JTAG Programmer" off\
X# Gw16012:	gw16012.c:67:20: error: sys/io.h: No such file or directory
X#			HTTPD "Enable builtin httpd server" off\
X# microhttpd does not link properly, used by some Zyli cable
X#			IOUTIL "Enable ioutil functions" off
X
X.include <bsd.port.options.mk>
X
X.if defined(WITH_DUMMY)
XCONFIGURE_ARGS+=	--enable-dummy
X.else
XCONFIGURE_ARGS+=	--disable-dummy
X.endif
X
X.if defined(WITH_FT2232)
XCONFIGURE_ARGS+=	--enable-ft2232_libftdi
XLIB_DEPENDS+=		ftdi:${PORTSDIR}/devel/libftdi
X.else
XCONFIGURE_ARGS+=	--disable-ft2232_libftdi
X.endif
X
X.if defined(WITH_PARPORT)
XCONFIGURE_ARGS+=	--enable-parport
X.else
XCONFIGURE_ARGS+=	--disable-parport
X.endif
X
X.if defined(WITH_AMTJTAGACCEL)
XCONFIGURE_ARGS+=	--enable-amtjtagaccel
XLIB_DEPENDS+=		usb:${PORTSDIR}/devel/libusb
X.else
XCONFIGURE_ARGS+=	--disable-amtjtagaccel
X.endif
X
X.if defined(WITH_ECOSBOARD)
XCONFIGURE_ARGS+=	--enable-ecosboard
XLIB_DEPENDS+=		usb:${PORTSDIR}/devel/libusb
X.else
XCONFIGURE_ARGS+=	--disable-ecosboard
X.endif
X
X.if defined(WITH_RLINK)
XCONFIGURE_ARGS+=	--enable-rlink
XLIB_DEPENDS+=		usb:${PORTSDIR}/devel/libusb
X.else
XCONFIGURE_ARGS+=	--disable-rlink
X.endif
X
X.if defined(WITH_JLINK)
XCONFIGURE_ARGS+=	--enable-jlink
XLIB_DEPENDS+=		usb:${PORTSDIR}/devel/libusb
X.else
XCONFIGURE_ARGS+=	--disable-jlink
X.endif
X
X.if defined(WITH_VSLLINK)
XCONFIGURE_ARGS+=	--enable-vsllink
XLIB_DEPENDS+=		usb:${PORTSDIR}/devel/libusb
X.else
XCONFIGURE_ARGS+=	--disable-vsllink
X.endif
X
X.if defined(WITH_OOCDTRACE)
XCONFIGURE_ARGS+=	--enable-oocd_trace
XLIB_DEPENDS+=		usb:${PORTSDIR}/devel/libusb
X.else
XCONFIGURE_ARGS+=	--disable-oocd_trace
X.endif
X
X.if defined(WITH_USBPROG)
XCONFIGURE_ARGS+=	--enable-usbprog
XLIB_DEPENDS+=		usb:${PORTSDIR}/devel/libusb
X.else
XCONFIGURE_ARGS+=	--disable-usbprog
X.endif
X
X.if defined(WITH_PRESTO)
XCONFIGURE_ARGS+=	--enable-presto_libftdi
XLIB_DEPENDS+=		ftdi:${PORTSDIR}/devel/libftdi
X.else
XCONFIGURE_ARGS+=	--disable-presto_libftdi
X.endif
X
X.if defined(WITH_GW16012)
XCONFIGURE_ARGS+=	--enable-gw16012
XLIB_DEPENDS+=		usb:${PORTSDIR}/devel/libusb
X.else
XCONFIGURE_ARGS+=	--disable-gw16012
X.endif
X
X.if defined(WITH_AT91RM9200)
XCONFIGURE_ARGS+=	--enable-at91rm9200
XLIB_DEPENDS+=		usb:${PORTSDIR}/devel/libusb
X.else
XCONFIGURE_ARGS+=	--disable-at91rm9200
X.endif
X
X.if defined(WITH_EP93XX)
XCONFIGURE_ARGS+=	--enable-ep93xx
XLIB_DEPENDS+=		usb:${PORTSDIR}/devel/libusb
X.else
XCONFIGURE_ARGS+=	--disable-ep93xx
X.endif
X
X.if defined(WITH_HTTPD)
XCONFIGURE_ARGS+=	--enable-httpd
XLIB_DEPENDS+=		microhttpd:${PORTSDIR}/www/libmicrohttpd
X.else
XCONFIGURE_ARGS+=	--disable-httpd
X.endif
X
X.if defined(WITH_IOUTIL)
XCONFIGURE_ARGS+=	--enable-ioutil
X.else
XCONFIGURE_ARGS+=	--disable-ioutil
X.endif
X
Xpost-install:
X	@${CAT} ${PKGMESSAGE}
X
X.include <bsd.port.mk>
88d611a1eb1fabe2051a56e779ff5244
echo x - /usr/ports/devel/openocd/pkg-descr
sed 's/^X//' >/usr/ports/devel/openocd/pkg-descr <<
'eacd5d8b52ed17b989af8d0f6d332e8a'
XThe Open On-Chip Debugger (OpenOCD) aims to provide debugging, in-system
Xprogramming and boundary-scan testing for embedded target devices. OpenOCD uses
Xa "hardware interface dongle" to communicate with the JTAG (IEEE 1149.1)
Xcompliant taps on your target board. OpenOCD currently supports many types
Xof hardware dongles: USB based, parallel port based, and other standalone boxes
Xthat run OpenOCD internally. It allows ARM7 (ARM7TDMI and ARM720t),
XARM9 (ARM920T, ARM922T, ARM926EJ-S, ARM966E-S), XScale (PXA25x, IXP42x) and
XCortex-M3 (Luminary Stellaris LM3 and ST STM32) based cores to be debugged
Xvia the GDB protocol. Flash writing is supported for external CFI compatible
XNOR flashes (Intel and AMD/Spansion command set) and several internal flashes
X(LPC2000, AT91SAM7, STR7x, STR9x, LM3, and STM32x). Preliminary support for
Xvarious NAND flash controllers (LPC3180, Orion, S3C24xx, more) controller is
Xincluded.
X
XWWW: http://openocd.berlios.de/
eacd5d8b52ed17b989af8d0f6d332e8a
echo x - /usr/ports/devel/openocd/pkg-plist
sed 's/^X//' >/usr/ports/devel/openocd/pkg-plist <<
'8d321b66b84ec001e4d3f5bb4abf6c26'
Xbin/openocd
Xlib/openocd/board/arm_evaluator7t.cfg
Xlib/openocd/board/at91rm9200-dk.cfg
Xlib/openocd/board/eir.cfg
Xlib/openocd/board/hammer.cfg
Xlib/openocd/board/iar_str912_sk.cfg
Xlib/openocd/board/imx27ads.cfg
Xlib/openocd/board/imx31pdk.cfg
Xlib/openocd/board/logicpd_imx27.cfg
Xlib/openocd/board/olimex_sam7_ex256.cfg
Xlib/openocd/board/pic-p32mx.cfg
Xlib/openocd/board/stm3210e_eval.cfg
Xlib/openocd/board/stm32f10x_128k_eval.cfg
Xlib/openocd/board/x300t.cfg
Xlib/openocd/ecos/at91eb40a.elf
Xlib/openocd/interface/arm-usb-ocd.cfg
Xlib/openocd/interface/at91rm9200.cfg
Xlib/openocd/interface/calao-usb-a9260-c01.cfg
Xlib/openocd/interface/calao-usb-a9260-c02.cfg
Xlib/openocd/interface/calao-usb-a9260.cfg
Xlib/openocd/interface/chameleon.cfg
Xlib/openocd/interface/dummy.cfg
Xlib/openocd/interface/flyswatter.cfg
Xlib/openocd/interface/jlink.cfg
Xlib/openocd/interface/jtagkey-tiny.cfg
Xlib/openocd/interface/jtagkey.cfg
Xlib/openocd/interface/luminary-libftdi.cfg
Xlib/openocd/interface/luminary-lm3s811.cfg
Xlib/openocd/interface/luminary.cfg
Xlib/openocd/interface/olimex-arm-usb-ocd.cfg
Xlib/openocd/interface/olimex-jtag-tiny-a.cfg
Xlib/openocd/interface/openocd-usb.cfg
Xlib/openocd/interface/parport.cfg
Xlib/openocd/interface/parport_dlc5.cfg
Xlib/openocd/interface/rlink.cfg
Xlib/openocd/interface/signalyzer.cfg
Xlib/openocd/interface/stm32-stick.cfg
Xlib/openocd/interface/str9-comstick.cfg
Xlib/openocd/interface/turtelizer2.cfg
Xlib/openocd/target/aduc702x.cfg
Xlib/openocd/target/at91eb40a.cfg
Xlib/openocd/target/at91r40008.cfg
Xlib/openocd/target/at91rm9200.cfg
Xlib/openocd/target/at91sam9260.cfg
Xlib/openocd/target/at91sam9260minimal.cfg
Xlib/openocd/target/epc9301.cfg
Xlib/openocd/target/imote2.cfg
Xlib/openocd/target/imx27.cfg
Xlib/openocd/target/imx31.cfg
Xlib/openocd/target/ipx42x.cfg
Xlib/openocd/target/is5114.cfg
Xlib/openocd/target/lm3s3748.cfg
Xlib/openocd/target/lm3s6965.cfg
Xlib/openocd/target/lm3s811.cfg
Xlib/openocd/target/lpc2129.cfg
Xlib/openocd/target/lpc2148.cfg
Xlib/openocd/target/lpc2148_2mhz.cfg
Xlib/openocd/target/lpc2148_rclk.cfg
Xlib/openocd/target/lpc2294.cfg
Xlib/openocd/target/netx500.cfg
Xlib/openocd/target/nslu2.cfg
Xlib/openocd/target/omap5912.cfg
Xlib/openocd/target/pic32mx.cfg
Xlib/openocd/target/pxa255.cfg
Xlib/openocd/target/pxa255_sst.cfg
Xlib/openocd/target/pxa270.cfg
Xlib/openocd/target/sam7se512.cfg
Xlib/openocd/target/sam7x256.cfg
Xlib/openocd/target/samsung_s3c2410.cfg
Xlib/openocd/target/samsung_s3c2440.cfg
Xlib/openocd/target/samsung_s3c4510.cfg
Xlib/openocd/target/samsung_s3c6410.cfg
Xlib/openocd/target/sharp_lh79532.cfg
Xlib/openocd/target/smdk6410.cfg
Xlib/openocd/target/smp8634.cfg
Xlib/openocd/target/stm32.cfg
Xlib/openocd/target/stm32stick.cfg
Xlib/openocd/target/str710.cfg
Xlib/openocd/target/str730.cfg
Xlib/openocd/target/str750.cfg
Xlib/openocd/target/str910-eval.cfg
Xlib/openocd/target/str912.cfg
Xlib/openocd/target/str9comstick.cfg
Xlib/openocd/target/test_reset_syntax_error.cfg
Xlib/openocd/target/test_syntax_error.cfg
Xlib/openocd/target/wi-9c.cfg
Xlib/openocd/target/xba_revA3.cfg
Xlib/openocd/target/zy1000.cfg
Xlib/openocd/tcl/bitsbytes.tcl
Xlib/openocd/tcl/chip/atmel/at91/aic.tcl
Xlib/openocd/tcl/chip/atmel/at91/at91sam7x128.tcl
Xlib/openocd/tcl/chip/atmel/at91/at91sam7x256.tcl
Xlib/openocd/tcl/chip/atmel/at91/pmc.tcl
Xlib/openocd/tcl/chip/atmel/at91/rtt.tcl
Xlib/openocd/tcl/chip/atmel/at91/usarts.tcl
Xlib/openocd/tcl/chip/st/stm32/stm32.tcl
Xlib/openocd/tcl/chip/st/stm32/stm32_rcc.tcl
Xlib/openocd/tcl/chip/st/stm32/stm32_regs.tcl
Xlib/openocd/tcl/cpu/arm/arm7tdmi.tcl
Xlib/openocd/tcl/cpu/arm/arm920.tcl
Xlib/openocd/tcl/cpu/arm/arm946.tcl
Xlib/openocd/tcl/cpu/arm/arm966.tcl
Xlib/openocd/tcl/cpu/arm/cortex_m3.tcl
Xlib/openocd/tcl/memory.tcl
Xlib/openocd/tcl/mmr_helpers.tcl
Xlib/openocd/tcl/readable.tcl
Xlib/openocd/xscale/debug_handler.bin
Xshare/openocd/contrib/libdcc/README
Xshare/openocd/contrib/libdcc/dcc_stdio.c
Xshare/openocd/contrib/libdcc/dcc_stdio.h
Xshare/openocd/contrib/libdcc/example.c
Xshare/openocd/contrib/openocd.udev
X@dirrm share/openocd/contrib/libdcc
X@dirrm share/openocd/contrib
X@dirrm share/openocd
X@dirrm lib/openocd/xscale
X@dirrm lib/openocd/tcl/cpu/arm
X@dirrm lib/openocd/tcl/cpu
X@dirrm lib/openocd/tcl/chip/st/stm32
X@dirrm lib/openocd/tcl/chip/st
X@dirrm lib/openocd/tcl/chip/atmel/at91
X@dirrm lib/openocd/tcl/chip/atmel
X@dirrm lib/openocd/tcl/chip
X@dirrm lib/openocd/tcl
X@dirrm lib/openocd/target
X@dirrm lib/openocd/interface
X@dirrm lib/openocd/ecos
X@dirrm lib/openocd/board
X@dirrm lib/openocd
8d321b66b84ec001e4d3f5bb4abf6c26
echo c - /usr/ports/devel/openocd/files
mkdir -p /usr/ports/devel/openocd/files > /dev/null 2>&1
echo x - /usr/ports/devel/openocd/files/patch-openocd.c
sed 's/^X//' >/usr/ports/devel/openocd/files/patch-openocd.c <<
'529dd6dcb3ebb9c3156bbe7df2145ffc'
X--- src/openocd.c	2009-01-20 05:04:36.000000000 +0100
X+++ src/openocd.c	2009-05-19 23:12:06.000000000 +0200
X@@ -56,12 +56,6 @@
X #include <unistd.h>
X #include <errno.h>
X
X-#ifdef _WIN32
X-#include <malloc.h>
X-#else
X-#include <alloca.h>
X-#endif
X-
X #include "replacements.h"
X
X void print_version(void)
X
529dd6dcb3ebb9c3156bbe7df2145ffc
echo x - /usr/ports/devel/openocd/pkg-message
sed 's/^X//' >/usr/ports/devel/openocd/pkg-message <<
'25d2c5af5cbf4af798994ca1a8d2288f'
X===============================================================================
X
XNow You can use OpenOCD. Handbook is at: http://openocd.berlios.de/doc/html/
X
XTo allow an ordinary user acces to the hotplug USB interface add him
Xto the operator group and add these lines to the following files:
X
X/etc/devfs.rules:
X[localrules=10]
X	add path 'ugen*' mode 0660 group operator
X
X/etc/rc.conf:
Xdevfs_system_ruleset="localrules"
X
X===============================================================================
25d2c5af5cbf4af798994ca1a8d2288f
exit
>Release-Note:
>Audit-Trail:
>Unformatted:



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?3fcfb0ba0905310718x5b3b97ccs4713a8332aac0e06>